• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.629-634
• /
• 2010

Mathematical model of maneuvering motion for a Mobile Harbor is established and versatile applications to the special situations of maneuvering are attempted. The Mobile Harbor in this research has twin Azipod thruster and twin bow thruster. In order to predict the maneuverability of Mobile Harbor, a mathematical model was developed on the basis of MMG model, and some model test results were adopted for the simulation of Mobile Harbor. As a result, the turning motions of the Mobile Harbor were successfully calculated. and the optimal berthing system was completed.

• Journal of Environmental Health Sciences
• /
• v.42 no.2
• /
• pp.92-101
• /
• 2016

Objectives: Outdoor workers are exposed to thermally stressful work environments. In this study, heat stress indices for harbor workers in summer were calculated to evaluate thermal comfort based on a human heat balance model. These indices are Physiological Subjective Temperature (PST), Dehydration Risk (DhR), and Overheating Risk (OhR) according to respective stage of cargo work in a harbor. In addition, we constructed a forecast system to provide heat stress information. Methods: Thermophysiological indices in this study were calculated using the MENEX model (i.e. the human heat balance model), which used as inputs the meteorological parameters, clothing insulation, and metabolic rate for each stage of cargo work in the harbor of Masan over the course of seven days, including a four-day heat wave. The forecast heat stress information constructed for Masan harbor was based on meteorological data supported by the Dong-Nae Forecast from the KMA (Korea Metrological Administration) and other input parameters. Results: According to higher metabolic rate, thermophysiological indices showed a critical level. In particular, PST was evaluated as reaching the 'Very hot' or 'Hot' level during all seven days, despite the heat occurring over only four. It is important in a regard to consider the work environment conditions (i.e. labor intensity and clothing in harbor). On a webpage, the forecast thermophysiological indices show as infographics to be easily understand. This webpage is comprised of indices for both current conditions and the forecast, with brief guidance. Conclusion: Thermophysiological indices show the risk level to health during a heat wave period. Heat stress information could help to protect the health of harbor workers. Further, this study could extend the applicability of these indices to a variety of outdoor workers in consideration of work environments.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.9
• /
• pp.620-626
• /
• 2011

The purpose of this study is to evaluate a simulation model of a stacking guidance system (SGS) with a roller guide applicable to the mobile harbor. The study used a small-scale model (1/20) made of wood with rollers in order to compare the dynamic analysis with experiment results. The law of similarity was applied for the validation of the scaled model. In order to construct a more realistic simulation model, the damping coefficient of the dynamic model was adjusted to 0.5 Ns/mm for the wood-to-wood contact condition based on the experimental results. Using this validated model, dynamic simulations were also carried out for containers of 20, 30, and 40 tons. The results showed that the reaction force of the roller guide was increased from 74.7 kN to 91.2 kN as the weight of container increased. For the design of a roller guide for SGS, the results obtained in this study can be used to reduce the reaction force by employing a rubber roller or a highly damped rotational joint.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.399-408
• /
• 1999

Copeland’s(1985) hyperbolic mild-slope equation including diffraction refraction and reflection in the wave field is used as a governing equation in this study. The result of Maruyama & Kajima(1985) is used to calculate wave direction and that of Watanabe & Maruyama(1986) is used as a energy dissipation formula. Numerical solutions are obtained by the Leap-Frog scheme and compared with Watanabe & Maruyama’s (1984) hydraulic experimental results and numerical simulation results for the detached breakwater. This wave model is applied to a detached breakwater and compared with Watanabe and Maruyama’s (1984) hydraulic model results to check the characteristics of reflected wave field around a detached breakwater. The distribution of wave height and we phase in front of a detached breakwater is more accurate than the Watanabe and Maruyama’s numerical results. The results from our wave model show good agreements with the others and also show nonlinear effects around the detached breakwater. This model is applied to the Gamcheon harbor of pusan. the field observations were carried out at Pusan harbor wave station in 1986-1995 and the results were accepted as a design wave condition in this study. The wave height and wave period was measured by Dong-A university at one station in the Gamcheon harbor in 1996-1997 and used as a calibration criterion. The measured data were used as input data for the numerical simulation and also compared with simulated results. The numerical simulation shows a fairly good results which considering the effect of topographic characteristics and effect of narrow entrance due to two separated breakwaters in Gamcheon harbor. The wave distribution characteristics inside Gamcheon harbor is quite different with the offshore wave direction and wave period.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.3
• /
• pp.178-189
• /
• 2004

For designing a reliable harbor, a methodology for estimating design waves of 97.5% operable harbor condition is suggested using long-term wave data. For a practical application of the methodology, a marine police harbor was selected as a site. Wave data used were collected from February 1993 to December 2003 at Jodo wave gage station in front of Pusan harbor. Joint distributions of significant wave height and significant wave period for specified wave directions were obtained and used to feed as input waves for parabolic mild-slope wave model. Results showed that input waves with significant wave height of 1.75 m, significant wave period off sec and wave direction E yield design waves height of 1.06 m at the site of interests, which is a 97.5% operable harbor condition. Wind waves generated inside harbor showed to be no effect on the design wave condition. Swells propagated from deep water into harbor are shown to be dominant effects on the design waves of operable harbor condition.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.304-314
• /
• 2009

A new harbor as been constructing in Gadukdo. However, a lot of fugitive dust gas been often generated from construction site reclaiming sea sand, especially when the Northwester is blown strongly. It has resulted insome appeals of residents in Gadukdo. In this study, we estimated the amount of fugitive dust caused by new harbor construction using Fugitive dust formula. Also, the concentration of PM10 for recipient is predicted by AERMOD. The amount of fugitive dust is 26.56 ${\mu}g/sec{\cdot}m^2$ and 11.84 ${\mu}g/sec{\cdot}m^2$ respectively by the Fugitive dust formula. PM10 outlet concentration and the amount of fugitive dust increase according to wind velocity and directions. AERMOD is performed on the basis of weather data and the amount of fugitive dust generated with wind velocity. As a result of AERMOD, the PM10 concentration of Sunchang and Oinul are predicted over 100 ${\mu}g/m^3$. The PM10 concentration of Sunchang and Oinul are predicted over 130 ${\mu}g/m^3$ when wind velocity of northwester in winter is over 11 m/s (Air Quality for Particulate Matter (100 ${\mu}g/m^3$ for 24 hours)). Also, the measured error between AERMOD and actual measurement is lower than 5%.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.31-45
• /
• 1996

This paper presents the results from a hydrodynamic model study to predict the impacts of coastal reclamation in Pusan harbor system using RMA2 which is a tidal flow model of the US Army Corps of Engineers' TABS-2 system. A finite element mesh was constructed and refined to cover the complicated geometry of Pusan harbor system and the proposed reclamation area. The model was calibrated to tidal elevations and currents measured during spring fall syzygys. Under the three different tidal conditions including summer winter syzygys, spring fall quarters, and summer winter quarters, the model predictions were compared with the field measurements both in tidal elevation and current. In all cases, there were excellent agreements between the model predictions and the field measurements. The validated model was then used to predict the changes in tidal current and elevation that might occur due to the coastal reclamation. It was predicted that there would be no change in tidal elevation of this system after the reclamation. In tidal current, however, discernible changes were predicted near the proposed reclamation area both in magnitude and direction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11b
• /
• pp.15-31
• /
• 1999

The Pusan Clay is analyzed hereafter from a point of view of mineralogy and microstructure. Results indicate that the Pusan Clay is basically illitic in nature and that the soil microstructure reveals some characteristics which could be responsible for its brittle behavior as observed from sample disturbance. The overall analysis would tend to consider that the Pusan Clay profile analyzed here shows mechanical properties similar to well structured soils or so-called cemented soils.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2004.06a
• /
• pp.192-196
• /
• 2004

• Parasites, Hosts and Diseases
• /
• v.47 no.4
• /
• pp.337-344
• /
• 2009

In a previous study, we reported our discovery of Acanthamoeba contamination in domestic tap water; in that study, we determined that some Acanthamoeba strains harbor endosymbiotic bacteria, via our molecular characterization by mitochondrial DNA restriction fragment length polymorphism (Mt DNA RFLP). Five (29.4%) among 17 Acanthamoeba isolates contained endosymbionts in their cytoplasm, as demonstrated via orcein staining. In order to estimate their pathogenicity, we conducted a genetic characterization of the endosymbionts in Acanthamoeba isolated from domestic tap water via 16S rDNA sequencing. The endosymbionts of Acanthamoeba sp. KA/WP3 and KA/WP4 evidenced the highest level of similarity, at 97% of the recently published 16S rDNA sequence of the bacterium, Candidatus Amoebophilus asiaticus. The endosymbionts of Acanthamoeba sp. KA/WP8 and KA/WP12 shared a 97% sequence similarity with each other, and were also highly similar to Candidatus Odyssella thessalonicensis, a member of the $\alpha$-proteobacteria. The endosymbiont of Acanthamoeba sp. KA/WP9 exhibits a high degree of similarity (85-95%) with genus Methylophilus, which is not yet known to harbor any endosymbionts. This is the first report, to the best of our knowledge, to show that Methylophilus spp. can live in the cytoplasm of Acanthamoeba.