• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.81-101
• /
• 1995

Random amplified polymorphic DNA (RAPD) technology, a recent approach in molecular genetics, is much usable to select the elite trees and to maximize the genetic gain in forest tree breeding program, providing a clue to determine the genetic marker-trait correlation. This review intorduces research on bark thickness and breeding strategy in Pinus elliottii, Pinus caribaea and their hybrid by Queensland Forest Service and ForBio Research Pty Ltd, University of Queensland, which employ RAPD technology. Genetic linkage map of $F_1$ hybrids includes 186 RAPD markers and 16 linkage groups (1641 cM long in total) and 6 quantitative trait loci are located putatively for bark thickness. Following recent research results and experiences in pine breeding programs, the forseeable stages in the application and development are proposed for marker assisted selectin; stage 1-determination of species specific markers for genes controlling traits of commercial interest, and stage 2-determination of marker-allele association for specific allelic variants within pure species. As pines inherit their megagametophytes from the seed parent and zygotic embryos from both male and female parents, the determination of marker-trait correlation is possible even in embryo stage, eventually making ways for the early selection of elite individuals.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2009.02a
• /
• pp.49-57
• /
• 2009

The cloning of canids was succeeded in 2005, several years after the birth of Dolly the sheep and also after the cloning of numerous other laboratory and farm animal species. The delay of successful somatic cell nuclear transfer (SCNT)was due to the unique reproductive characteristics of the female dogin comparison to other domestic mammals, such as ovulation of immature canine oocyte and a requirement of 25 days for the completion of meiosis within the oviduct (Holst & Phemister, 1971). When the technology for the recovery of in vivo matured oocyte was established, the application of cloning also became possible and cloned dog offspring were obtained. This report summarizes the progress of technical procedures that are required for cloning canids and the application of this technique. The first cloned dog, Snuppy, was achieved using an in vivo-matured oocyte which was enucleated and transferred with an adult skin cell of male Afghan hound. After establishment of a criterion of well-matured oocyte for the improvement of SCNT efficiency, we obtained three cloned female Afghan hound and a toy poodle cloned from 14 year-old aged Poodle using SCNT through this factor. To date, cloned dogs appeared to be normal and those that have reached puberty have been confirmed to be fertile. Through application of canine SCNT technique, first, we demonstrated that SNCT is useful for conserving the breed of endangered animal from extinction through cloning of endangered gray wolves using inter-species SCNT and keeping the pure pedigree through the cloning of Sapsaree, a Korean natural monument. Secondly, we showed possibility of human disease model cloned dog and transgenic cloned dog production through cloning of red fluorescent protein expressing dog. Finally, SCNT can be used for the propagation of valuable genotypes for making elite seed stock and pet dog. In summary, dog cloning is a reproducible technique that offers the opportunity to preserve valuable genetics and a potential step towards the production of gene targeted transgenic cloned dogs for the study of human diseases.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.3
• /
• pp.152-157
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of Primula malacoides, 10 lines that were considered uniform in growth and flowering characteristics were selected from self-crossings of the sixth generation ($S_6$). Plant height of the selected lines ranged from 20.8 to 33.2 cm, and number of leaves ranged from 33.6 to 54.2. The selected lines flowered at 181.4 to 207.8 days after sowing. Three lines, including 'PR-03-81', flowered in less than 190 days from sowing, while six lines, including 'PR-03-228', only flowered after more than 200 days from sowing. In terms of petal color, six lines, including 'PR-03-81', were pink, three, including 'PR-03-236', were purple, and line 'PR-03-275' was white. Flower diameter ranged from 2.4 to 2.9 cm, and number of pedicels per plant was between 15.4 and 26.4. Number of flowers per pedicel ranged from 20.2 to 30.2. Germination was more than 70%, and number of seeds per capsule (pod) ranged from 110.0 to 162.8. In summary, plant height was low and flower diameter was small and plants had many flowers and readily formed seeds. The selected lines are not only valuable as ornamental plants but could also be used as breeding materials for $F_1$ hybrids of Primula polyantha.

• Korean Journal of Breeding Science
• /
• v.49 no.4
• /
• pp.396-402
• /
• 2017

'Daname' is a foxtail millet(Setaria italica Beauv.) variety developed and registered by Department of Southern Area Crop Science, NICS, RDA in 2014. This variety which collected from IT252182 was developed through pure line selection. 'Daname' is a early-maturing variety having 100 days of growth period from seeding to harvesting in Milyang of Korea. The culm length is about 97 cm which is 20cm shorter culm length than standard variety 'Hwanggeumjo', and it showed tolerant to lodging in field. The panicle shape is a cylindrical and the length is about 19cm. According to the grain, seed color and dehusked grain colors are orange and yellow and endosperm characteristic is non-glutinous. The yield performance of this variety was about $3.81t\;ha^{-1}$ in local adaptability test from 2013 to 2014 and it showed similar with standard variety 'Hwanggeumjo'. As the addition amount of 'Daname' in rice increased from 0% to 30% and 100%, the antioxidant ability of 'Daname' added rice and hardness/stickiness balances were increased. But we could not find out the difference of hardness/stickiness balances between 0%and 10% addition. So, 10% addition amount was concluded to increase antioxidant ability regardless eating quality of cooked rice. (Variety registration No. 6243)

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.206-211
• /
• 1984

The influence of fertilizer on the growth characteristics in Korean lawn grass was studied from June through October in a experiment. The results were as follows: 1. Maximum dry matter weight of Korean lawn grass was achieved in early in early August when it was $64.3g/m^2$ without fertilizer and $157.9g/m^2$ with fertilizer. On the other hand, the dry matter weight of whole plant including Korean lawn grass reached the maximum in late September, which was late, to some extent, compared with that if pure Korean lawn grass, presumably associated with seed maturing period of $C_4$ type plants. 2. Notable positive effect on leaf blade and non-leaf part weight in Korean lawn grass was also detected. However, the rate of dry matter occupied by non-leaf part was markedly increased by fertilizer application. 3. The dry matter portion occupied by Korean lawn grass the in total dry matter weight of whole plant was significantly decreased as time went by, particularly in case of fertilizer application. 4. Fertilizer, which might imply an increased potential of tiller numbers according to fertilizer. 5. In general, the seasonal change pattern of the rhizome of Korean lawn grass coincided with that of the aboveground organs: Its maximum dry matter weight achieved from late August to early September was $194.2g/m^2$ with nil fertilizer, and, with fertilizer, $259.7g/m^2$, of which figures were equivalent to be increased to 33.7%, compared to that with nil fertilizer. Applying fertilizer increased the weight of root: The highest values were $36.7g/m^2$ with nil fertilizer and $80.9g/m^2$ with fertilizer.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.156-160
• /
• 2008

This study was conducted to find on the screening of a optimal variety after compare with characteristics of a colored soybean recommended and a vegetable soybean by pure line isolation from the indigenous variety in Chungnam area. The budding period in results compared with a budding property of testing varieties between the recommended colored soybean 6 varieties and the indigenous 3 varieties, was showed that it was delayed by increasing of a grain weight but the budding rate was not significant. And the harvest period was the most early day at the black colored soybean plot at the 30th July and was the latest day at the native variety (Nonsan jaerae) at the 21 th October. The stem length was showed a wide range from 25 to 104 cm, and the Asan jaerae in this result was the highest on 104 cm, but the Geomjeongolkong was the lowest on 25 cm. The number of pod per plant was searched about 9 to 111 range, and the most numerous plot in this experimental varieties was the Ilpumgeomjeongkong as 111 number, on the other hand, the least variety was the Asan jaerae as 9 number. The rate of more than 2 seed per pod in the vegetable soybean property was the highest at the Geomjeongolkong about 82%. Additionally, the Hwangkuemkong and Geomjeongkong 1 was relatively the high levels as 78% and 73%, respectively. At the pod yield per $1000\;m^2$ (10a) was the most much as 1,567 kg at the Ilpumgeomjeongkong. Also, the Sunheukkong and the Galmikong was 1,468 kg, 1,397 kg, respectively. Therefore, the Ilpumgeomjeongkong, Sunheukkong, and Galmikong were proper varieties for the vegetable cultivation.

• (The)Study of the Eastern Classic
• /
• no.62
• /
• pp.145-176
• /
• 2016

This paper aims to define the leadership of Gunja (君子, translated into prince, gentleman, or ideal man) based on Confucian Classics which offer the general values and norms of individuals' virtue and social virtuous acts. Thus, humanitarianism is regarded as true value, and the values of a virtuous person who properly practices social human relationships are discussed. The real worth of Gunja image is discussed as a true human image of "self-completion and completion of all things" (成己成物) which involves the convergence of truth, good and beauty where there is a sense of harmony and balance, where there is stern self discipline and self cultivation and where win-win values of human relationships are created. Confucian saint (聖人), wise man (賢人), great man (大人), and gentleman (君子) mean social leaders. They practice human morals, enlighten and beautify society with teachings, and are indicated as equipped with mental and material harmony, good character and competence, and economic power and morality. People today pursue their own personal growth according to their material preferences rather than pure intellectual cultural values, and are engrossed in visually beautiful external unlimited competition. In this digital age, we are supposed to demonstrate our individuality, but many people are obsessed with appearance, go on severe diet, and lose their health beauty, and consequently suffer mental stress. This trend fuels obsession with appearance and the sick practice of valuing appearance. As an alternative method to overcome this phenomenon, we need a leader image with the convergence of truth, good and beauty, which is characterized by internal self cultivation, external professionalism, and handsome and solid character. Confucian thoughts consist in practicing the Way of disciplining oneself for governing others (修己治人). Self discipline involves developing personal virtuous ability for cultivating a virtuous character, and governing others involves interacting to work together in society and to have right human relationships. Thus, leaders should impress not only themselves but also others. Self discipline for governing others means cultivating virtue for oneself and leading others. A true leader has self introspection and establishes himself through self discipline so that he can govern others or reach the realm of settling others where people live together. As all things have a value and a virtue, humans endeavor to cultivate character and virtue by learning and studying for securing their professionalism, reliability, character and ability, so as to create their own brand value. Personal character does not come from a high position, wealth and power. Character is a personal virtue, and is cultivated as immaculate and fresh through self discipline. As such, it well matches with a clean and clear spirit. This offers the ideal leader as the Guja image who has an extremely humane character, as well as being equipped with inherent virtues of intellect, benevolence and courage. Self development can foster virtue and self management through self leadership and self discipline. The leader in the relationship area can practice his virtue through virtuous acts, in other words, even think from another person's perspective. Such leader is mentioned as the principle of measuring square in the Great Learning. In our viewpoint, the beauty of character can breed the seed of virtue through intellect, benevolence and courage, the beauty of win-win can realize the right virtue by showing exemplary acts to others through considerateness, and the beauty of harmony can love and care for others like me through the principle of measuring square, thereby realizing the universal principle of virtue and harmony, which is like my mind. As such, the ideal leader, when his virtue and mind of being considerate of others all blending well, can exercise his ability to the full, can live together and coexist with many people, and can grow again into a triumphant relationship.