• Journal of Genetic Medicine
• /
• 제14권2호
• /
• pp.71-74
• /
• 2017

Mutations in the DNA methyltransferase 1 gene (DNMT1) were reported to cause two phenotypes: OMIM 604121 and OMIM 614116. The first phenotype includes autosomal dominant cerebellar ataxia, deafness, and narcolepsy, which were reported to be caused by mutations in exon 21. The second phenotype includes hereditary sensory and autonomic neuropathy type 1E, which was suggested to be caused by mutations in exon 20 and 21. In this article, we report a novel heterozygous missense variant c.898A>C, p.(Lys300Gln) in exon 12 of DNMT1 in a young woman who presented with pure cerebellar ataxia. This report indicates that a mutation in exon 12 may lead to pure cerebellar ataxia. Another possibility is that the patient is currently in an early stage of the disease, and as the disease progresses, she will have more manifestations. To confirm or exclude this possibility, a subsequent follow-up study reporting the disease progression in this patient may be needed. Further reports of cases with the same mutation are needed to confirm the phenotype of this mutation.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.155-158
• /
• 2010

The HDDR (hydrogenation, disproportionation, desorption, and recombination) process can be used as an effective way of converting a no coercivity Nd-Fe-B ingot material, with a coarse $Nd_2Fe_{14}B$ grain structure, to a highly coercive one with a fine grain structure. Careful control of the HDDR process can lead to an anisotropic powder with good $Nd_2Fe_{14}B$ grain texture; the most critical step for inducing texture is disproportionation. The critical conditions (hydrogen pressure and temperature) for the disproportionation reaction of fully hydrogenated $Nd_{12.5}Fe_{81.1-(x+y)}B_{6.4}Ga_xNb_y$ (x = 0 or 0.3, y = 0 or 0.2) alloys, in different atmospheres of pure hydrogen and a mixed gas of hydrogen and argon, was investigated with TPA (thermopiezic analyser). From this, the hydrogen pressure-temperature diagram showing the critical conditions was established. The critical disproportionation temperature of the fully hydrogenated $Nd_{12.5}Fe_{81.1-(x+y)}B_{6.4}Ga_xNb_y$ alloys was slightly increased as the hydrogen pressure decreased in both pure hydrogen and mixed gas. The critical disproportionation temperature of the hydrogenated alloys was higher in the mixed gas than in pure hydrogen. Addition of Ga and Nb increased the critical disproportionation temperature of the fully hydrogenated Nd-Fe-B alloys.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.52-58
• /
• 2014

Because food crops serve as the raw materials for biodiesel, the increasing use of biodiesel as an alternative fuel can lead to adverse effects such as food price inflation and may contribute to global starvation. To solve these problems, efforts are being made to explore various nonedible raw materials for producing biodiesel. Different raw materials impart different fuel characteristics to biodiesel. In this study, we synthesized pure fatty acid methyl ester (FAME), which is a biodiesel component, and then analyzed its fuel properties. The fuel properties of pure FAME would be useful in producing biodiesel from various new raw materials.

• Journal of Radiation Protection and Research
• /
• 제4권1호
• /
• pp.14-20
• /
• 1979

고(高)에너지 방사선(放射線) 치료(治療)에 있어서 정상조직(正常組織)의 완전차폐(完全遮蔽)를 위하여 $5{\sim}8cm$ 납두께의 부정형(不定形) 차폐(遮蔽)벽돌을 제작(製作)해야하는 난점(難點)이 있었다. 저자(著者)들은 납 30.0%, 주석 11.5% 비스므스 48.5%, 카드미늄 10.0%를 사중(四重) 공정결합(共晶結合)시켜 밀도(密度)가 $9.8g/cm^3$ 용융온도(熔融溫度)가 $68^{\circ}C$인 저용융(低熔融) 차폐물질(遮蔽物質)을 개발(開發)하여 이를 Lead Y라고 명명(名命)하였다. 제작(製作)된 Lead Y Block을 $68^{\circ}C$에서 용융(熔融)시켜 보호(保護)해야할 중요(重要)한 장기(臟器)의 형태(形態)대로 제작(製作)된 styrofoam 음형(陰形)에 부어서 차폐효과(遮蔽效果)가 큰 차폐(遮蔽)벽돌을 쉽고 안전(安全)하게 제작(製作)할 수 있었고 납보다 더 단단하고 재현성(再現性)이 크며 저렴(低廉)한 가격(價格)으로 구입(購入)이 가능(可能)하므로 방사선(放射線) 치료효과(治療效果)에 큰 도움을 줄 수 있었다.

• 한국세라믹학회지
• /
• 제22권2호
• /
• pp.39-43
• /
• 1985

This study presents the results of an overall effort to detemine the applicability of the chemical wet process informing lead titanate electronic ceramics. Although pure lead titanate has not proven to be an important technological materials when prepared via conventional processing procedures this work is interesting as a study of chemical wet processing and a way of preparing pbTiO3 for study. The result obtained from this experiment were as follows ; Optimum synthesis condition which synthesize PbTiO3 by chemical wet process was obtained by firing at 50$0^{\circ}C$ after mixing $Pb(OH)_2$- gel and $Ti(OH)_4$ -gel at 7$0^{\circ}C$ for 4 hours.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.399-404
• /
• 1996

Hydrothemal synthesis of PbTiO3 has been investigated. A comprehensive thermodynamic model for heteroge-nous reacting solid-aquous system has been used to predict the optimum condition for the synthesis. Synthesis were performed using lead acetate trihydrate as Pb source crystalline TiO2 as Ti source and KOH as minerali-zer. The synthesis has been examined at low temperature (16$0^{\circ}C$) Phase pure perovskite PbTiO3 has been obtained at high pH(above 0.5 mol KOH). The morphology of PbTiO3 was acicular shape. It has been found sible for a distortion in the c direction. The water is gradully released on annealing the powder to 40$0^{\circ}C$ and the normal crystallographic properties are restored.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.17-21
• /
• 2013

Sn whiskers are one of the serious causes of the failure of electronics. Sn whiskers grow spontaneously from Sn-based, lead-free finished surfaces, even at room temperature. A primary factor of these Sn whiskers growth is compressive stress, which enhances the diffusion of Sn or other elements. The sources of compressive stress are the growth of non-uniform large intermetallic compounds along the interface between the Sn grain boundary and Cu substrate. Recent studies revealed the methods for reducing Sn whisker growth. This paper gives an overview about recent researches for mitigation methods of Sn whisker growth during nearly room temperature storage.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1642-1651
• /
• 2021

In this study, isophtalic neopentyl glycol polyester (NPG-PES) based composites with different loading ratios of pure tungsten metal (W), tungsten (VI) oxide (WO₃), tungsten boron (WB) and tungsten carbide (WC) composites were prepared as alternative shielding materials for ionizing electromagnetic radiation (IEMR) shielding. Structural characterizations of the composites were done. Gamma spectrometric analysis of composites for 80-2000 keV energy range was performed and their usability as IEMR shielding was discussed. As a result, the produced composites showed a shielding performance of 60-100% of the lead (the most widely used IEMR shielding material) depending on the reinforcement material, reinforcement loading rate and experimental conditions. Thus, it was reported that produced composites could be an alternative to lead shieldings that have several disadvantages as toxic properties, difficulty of processing and inelasticity.

• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.47-58
• /
• 1985

The study is concerned with the analysis of the required loads and torque in the Three-Roll Power Spinning Process by using the Method of Force Polygon Diagram. Experiments are carried out using pure lead billets at room temperature. The radial force, the axial force and the torque occurring during the process are calculated theoretically and are compared with the experimental data. An approximate load distribution is known by the Force Polygon Diagram.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.333-338
• /
• 2019

방사선치료 분야에서는 치료의 안전성을 검증하기 위한 Quality Assurance(QA) 절차가 매우 중요하게 여겨진다. 그러나 일반적으로 이에 사용되는 선량계들의 다양한 문제점 때문에, 이를 대체하기 위한 선량계 연구가 활발히 진행되고 있다. 본 연구에서는 형광체로부터 방출된 visible light(VL)에 의한 Sensitivity 극대화를 위해, 뛰어난 형광 효율을 가지는 형광체인 $Gd_2O_2S:Tb$를 요오드화납(Lead(II) Iodide; $PbI_2$)에 다양한 weight percent(wt%)로 혼합한 Blended hybrid sensor를 제작하였다. 이후 Blended sensor 및 Pure $PbI_2$ sensor의 고에너지 방사선에 대한 반응특성을 비교 및 평가하였다. 민감도 평가결과, 3wt%는 sensor에서 타 sensor들과 40% 이상 차이나는 최댓값이 나타났으며, 이를 제외한 센서에서 wt%의 증가에 따른 점차적 민감도 감소추세를 확인하였다. 또한, 재현성 평가에서는 Pure $PbI_2$ sensor가 coefficient of variation(CV)>0.015의 큰 편차를 보인 반면, blended sensor는 모두 CV<0.015 이하의 결과를 보였다.