• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.35-40
• /
• 2005

The oxidation of pure Sn and Sn-0.7Cu, Sn-3.5Ag, Sn-lZn, and Sn-9Zn alloys at $150^{\circ}C$ was investigated. Both the chemical nature and the amount of oxides were characterized using electrochemical reduction analysis by measuring the electrolytic reduction potential and total transferred electrical charges. X-ray photoelectron spectroscopy (XPS) was also conducted to support the results of reduction analysis. The effect of Cu, Ag and Zn addition on surface oxidation of Sn alloys is reported. For Sn, Sn-0.7Cu and Sn-3.5Ag, SnO grew first and then the mixture of SnO and $SnO_2$ was found. $SnO_2$ grew predominantly for a long-time aging. For Zn containing Sn alloys, both ZnO and $SnO_2$ were formed. Zn promotes the formation of $SnO_2$. Sn oxide growth rate of Pb-free solder alloys was also discussed in terms of alloying elements.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1027-1033
• /
• 2012

Conventional SMB process is operated using 4-zone having several chromatography columns in each zone. Unlike batch chromatography, SMB process can continuously separate binary materials. Both high productivity and purity are obtainable by using SMB process. In this study, the simulation on Thermal Simulated Moving Bed Concentrator (TSMBC) which is a SMB process with thermal swing adsorption was carried out. The advantage of TSMBC is that adsorption isotherm can be easily controlled by thermal wave or direct heating. Recovery of pure water and concentration of phenol was studied in simulation. To verify environmental-friendly potential of TSMBC, DOWEX $1{\times}4$ was chosen as an adsorbent and phenol was selected as a target material. When 3 columns were used in this study, concentration of phenol is 2.29, 2.28 and 1.31 times higher than injected sample. However, a contamination of phenol in solvent port was found, probably due to the restriction of adsorption isotherm of phenol on DOWEX $1{\times}4$.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.240-245
• /
• 2010

The objective of this study was to determine the effect of different height of drainpipe and growing media soilless cultivated cut rose in container culture. Two experiment were to examine the effect of the drainpipe height and media composition on yield and quality of cut rose, Four different drainpipe height (0, 3, 6, 9 cm) were treated to determine of optimal container type. Yield was the highest at 3 cm drainpipe height, but quality was not significantly affected by drainpipe height. Survival rate of rose was 100%, 100%, 92%, and 92%, respectively. Two different drainpipe height (0, 3 cm) and 7 media composition (pure coir and pelite, and mixed with two media 3 : 1, 2 : 1, 1 : 1, 1 : 2, 1 : 3 v/v) was treated to determine of media composition related to drainpipe height. The supply of nutrient solution was controlled by the signal of water potential at -5 kPa using frequency domain reflectometry (FDR) sensor in mixed coir with pelite 3 : 1, 1 : 1, 1 : 3 (v/v), respectively. Irrigation frequency reduced in high ratio of coir media and 3 cm height of drainpipe. Quality of cut rose except for flower weight and yield until 2nd harvest was not significantly affected by drainpipe height, but yield after 3rd was higher at 3 cm than 0 cm height of darinpipe. In the media composition, yield and qulity of cut rose was increased at high ratio of coir media.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.77-84
• /
• 2014

Biodegradable nanocomposites were fabricated with poly (lactic acid) (PLA) and Nanomer$^{(R)}$ I.44P using ultrasonication (US). Processing conditions were optimized to obtain the maximum tensile properties of the nanocomposites. Poly (ethylene glycol) (PEG) was used as a plasticizer to avoid the brittleness of nanocompsoties. In order to disperse nanoclay into the PLA matrix, PEG and Nanomer$^{(R)}$ I.44P were firstly mixed and dispersed in the chloroform and followed by ultrasonication for 1 min With 10% PEG 400, tensile stress and Young's modulus of the nanocomposites decreased from 53.5 MPa and 2225 MPa to 37.0 MPa and 1757 MPa, respectively, while the elongation was increased from 4% to 21%. Tensile stress, Young's modulus, and elongation of nanocomposites were also increased with nanoclay concentration up to 2% (w/w) and were decreased with further increase in the nanoclay concentration. Transmittance of nanocomposites were significantly decreased from 62.5% for pure PLA film to 7.8% for 5% nanoclay containing nanocomposites. Water vapor permeability of the nanocomposites was also significantly decreased with nanoclay concentration and the minimum WVP of $3.5{\times}10^{-11}g{\cdot}m/m^2{\cdot}s{\cdot}Pa$ was obtained with 5% (w/w) nanoclay concentration. The PLA/Nanomer$^{(R)}$ I.44P nanocomposites showed a great potential as a environmental friendly food packaging material.

• Journal of Ginseng Research
• /
• v.40 no.2
• /
• pp.97-104
• /
• 2016

Background: Rhizobacteria play an important role in plant defense and could be promising sources of biocontrol agents. This study aimed to screen antagonistic bacteria and develop a biocontrol system for root rot complex of Panax notoginseng. Methods: Pure-culture methods were used to isolate bacteria from the rhizosphere soil of notoginseng plants. The identification of isolates was based on the analysis of 16S ribosomal RNA (rRNA) sequences. Results: A total of 279 bacteria were obtained from rhizosphere soils of healthy and root-rot notoginseng plants, and uncultivated soil. Among all the isolates, 88 showed antagonistic activity to at least one of three phytopathogenic fungi, Fusarium oxysporum, Fusarium solani, and Phoma herbarum mainly causing root rot disease of P. notoginseng. Based on the 16S rRNA sequencing, the antagonistic bacteria were characterized into four clusters, Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetesi. The genus Bacillus was the most frequently isolated, and Bacillus siamensis (Hs02), Bacillus atrophaeus (Hs09) showed strong antagonistic activity to the three pathogens. The distribution pattern differed in soil types, genera Achromobacter, Acidovorax, Brevibacterium, Brevundimonas, Flavimonas, and Streptomyces were only found in rhizosphere of healthy plants, while Delftia, Leclercia, Brevibacillus, Microbacterium, Pantoea, Rhizobium, and Stenotrophomonas only exist in soil of diseased plant, and Acinetobacter only exist in uncultivated soil. Conclusion: The results suggest that diverse bacteria exist in the P. notoginseng rhizosphere soil, with differences in community in the same field, and antagonistic isolates may be good potential biological control agent for the notoginseng root-rot diseases caused by F. oxysporum, Fusarium solani, and Panax herbarum.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.228-236
• /
• 2009

In this study, we investigated morphological characteristics of $SF_6$ clathrate hydrate crystals to understand its formation and growth mechanism. $SF_6$ clathrate hydrate crystals were formed in high-pressure reaction cell charged with pure water and $SF_6$ gas at constant pressure and temperature. Two-phase ($SF_6$ gas/aqueous solution) and three-phase ($SF_6$ gas/aqueous solution/$SF_6$ liquid) conditions were investigated, In both conditions, dendritic shape hydrate crystals were grown as like fibriform crystals along upward growth direction at the gas/aqueous solution interface. In the case of the reaction process of three-phase condition, when the $SF_6$ gas bubbles which were generated in $SF_6$ liquid phase due to the reduction of reaction cell pressure stuck to the gas/aqueous interfaces, the hydrate phase were appeared at the surface of the bubbles. This paper presents the detail growth characteristics of $SF_6$ hydrate crystals including crystal nucleation, migration, growth and interference.

• Journal of Korean Dental Science
• /
• v.10 no.1
• /
• pp.10-21
• /
• 2017

Purpose: The purpose of this study was to investigate the electrochemical characteristics of nanotubular Ti-25Nb-xZr ternary alloys for dental implant materials. Materials and Methods: Ti-25Nb-xZr alloys with different Zr contents (0, 3, 7, and 15 wt.%) were manufactured using commercially pure titanium (CP-Ti), niobium (Nb), and zirconium (Zr) (99.95 wt.% purity). The alloys were prepared by arc melting in argon (Ar) atmosphere. The Ti-25Nb-xZr alloys were homogenized in Ar atmosphere at $1,000^{\circ}C$ for 12 hours followed by quenching into ice water. The microstructure of the Ti-25Nb-xZr alloys was examined by a field emission scanning electron microscope. The phases in the alloys were identified by an X-ray diffractometer. The chemical composition of the nanotube-formed surfaces was determined by energy-dispersive X-ray spectroscopy. Self-organized $TiO_2$ was prepared by electrochemical oxidation of the samples in a $1.0M\;H_3PO_4+0.8wt.%$ NaF electrolyte. The anodization potential was 30 V and time was 1 hour by DC supplier. Surface wettability was evaluated for both the metallographically polished and nanotube-formed surfaces using a contact-angle goniometer. The corrosion properties of the specimens were investigated using a 0.9 wt.% aqueous solution of NaCl at $36^{\circ}C{\pm}5^{\circ}C$ using a potentiodynamic polarization test. Result: Needle-like structure of Ti-25Nb-xZr alloys was transform to equiaxed structure as Zr content increased. Nanotube formed on Ti-25Nb-xZr alloys show two sizes of nanotube structure. The diameters of the large tubes decreased and small tubes increased as Zr content increased. The lower contact angles for nanotube formed Ti-25NbxZr alloys surfaces showed compare to non-nanotube formed surface. The corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface showed longer the passive regions compared to non-treatment surface. Conclusion: It is confirmed that corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface has longer passive region compared to without treatment surface.

• KDI Journal of Economic Policy
• /
• v.26 no.2
• /
• pp.3-62
• /
• 2004

This paper estimates Korea's natural rate of unemployment using various estimation methods such as pure time-series methods, reduced-form methods, and structural form methods, with discussion about relative advantages and disadvantages of each estimation method. This paper also provides the confidence interval of the estimated natural rate of unemployment by the Monte Carlo integration method. Though multivariate unobserved component model exhibits better performance in many aspects than other estimation methods, awareness should be raised for a potential misspecification problem of a multivariate unobserved component model. Considering that each method has its own advantages and disadvantages, it is recommended to make an inference on the natural rate of unemployment based on common results among various methods. Korea's natural rate of unemployment was estimated to be around 3.8~4.0% on average in the period of 1979:I~1987:IV, and to decline to 2.5~2.9% in the period of 1988:I~1997:IV. During the Asian crisis, it is estimated to peak at near 4.8% and to have been on a downward trend since then.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.280-285
• /
• 2006

The current study was conducted to investigate the relationship between stress related gene and meat quality in pigs. A total number of 212 three-way cross bred (Landrace-$Yorkshire{\times}Duroc$) and 38 Duroc were sampled from the Korean pig industry to determine genotype frequency of porcine stress syndrome (PSS) and heat shock protein 70 kDa (HSP70) genes and their relationship with carcass traits and longissimus meat quality. Screen of HSP70 was performed by the single strand conformation polymorphism (SSCP) technique. Based on the analysis of restriction fragment length polymorphism (RFLP) in ryanodine receptor 1 (RYR1) gene, genetic disorder of PSS was related to a mutation at $18,168^{th}$ (C to T) of exon 17. There was no significant difference in ultimate meat pH and backfat thickness between HSP70 K1-AA type and -BB type in pure Duroc breed. In Landrace-$Yorkshire{\times}Duroc$ (L-$Y{\times}D$) cross bred pig, our results indicated that HSP70 derivate type in Duroc had a limited effect on backfat thickness, but L-$Y{\times}D$ type had a noticeable linkage with HSP70 K1-AA and K3-AB. This tendency was also observed in hot carcass weight where HSP70 K1-AA and K3-AB resulted in heavier weight with 86.3 kg compared to HSP70 K1-AB and K3-BB of 74.3 kg. Results imply that stress related HSP70 genotype has a potential association with backfat thickness and carcass weight.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.183-183
• /
• 2014

Recently, multiferroic materials gain much attention due to their fascinating fundamental physical properties. These materials offer wide range of potential applications such as data storage, spintronic devices and sensors, where both electronic and magnetic polarizations can be coupled. Among single-phase multiferroic materials, $BiFeO_3$ is typical because of the room-temperature magnetoelectric coupling in view of long-range magnetic- and ferroelectric-ordering temperatures. However, $BiFeO_3$ is well known to have large leakage current and small spontaneous polarization due to the existence of oxygen vacancies and other defects. Furthermore the magnetic moment of pure $BiFeO_3$ is very weak owing to its antiferromagnetic nature. Recently, various attempts have been performed to improve the multiferroic properties of $BiFeO_3$ through the co-doping at the A and the B sites, by making use of the fact that the intrinsic polarization and magnetization are associated with the lone pair of $Bi^{3+}$ ions at the A sites and the partially-filled 3d orbitals of $Fe^{3+}$ ions at the B sites, respectively. In this study, $BiFeO_3$, $Bi_{0.9}Ho_{0.1}FeO_3$, $BiFe_{0.97}Ni_{0.03}O_3$ and $Bi_{0.9}Ho_{0.1}Fe_{0.97}Ni_{0.03}O_3$ bulk compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Ho_2O_3$, $Fe_2O_3$ and $NiO_2$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h to produce the samples. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent and temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer and superconducting quantum-interference device.