• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2001

The levels of sanitary management procedures in university and industry foodservices, in pusan, were investigated. The questionnaires were administed to ninety three dietitians who managed university (n=21) and industry (n=72) foodservices and then the data were statistically analyzed. When sanitary management procedures were evaluated by 5 scales method of Likers, total mean scores of time-temperature management in the process of meal production, personal hygiene, equipments and facilities hygiene in university and industry foodseryice operations were 3.48, 3.76 and 3.27, repectively. In time-temperature management, the scores for storage, purchasing and receiving, pre-preparation, cooking, assembly and service, and hot or cold holding were 3.77, 3.74, 3.55, 3.54, 3.28, 3.05, respectively, in descending order. The management levels for personal hygiene, equipments and facilities hygiene of foodservices had biger serving scale (over 901) were significnatly higher than those of lower sclaled foodservices(below 900). The scores of foodservices managed by higher aged dietitian(over 31 years) were significantly higher than those of foodservices conducted by lower aged group(below 25 years) in the management procedures of time-temperature, personal hygiene, equipments and facilities hygiene(p<0.05). The dietitian group had the regular sanitary education showed significantly higher scores than irregularly educated group in the management of time-temperature and personal hygiene.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.1-21
• /
• 2018

According to the results of the FKI's ethical management status and CSR promotion status, about 95% of domestic companies enact the Code of Ethics, while 64% of companies operating systems for communication and dialogue with stakeholders in the process of CSR activities, It seems that strategic CSR activities of domestic companies have not been fully established yet compared with the introduction of ethical management. Even if companies conduct CSR activities strategically, there is very little CSR level of the companies that consumers perceive. This is because the psychological mechanism of CSR on consumers' perceptions is too complicated and detailed, resulting in a positive result and a negative result depending on the investigator's research method. So far, there have been many studies on the direct impact of CSR on corporate evaluation, purchase intention, and corporate image. However, there are few studies on the effect of CSR and CA on purchase intention through product attitude. Therefore, The purpose of this study is to demonstrate the effect of corporate social responsibility(CSR) and corporate Ability(CA) on the purchase intention through product attitudes perceived by consumers, and the moderating effect of corporate reputation between product attitude and purchase intention. As a research method, we selected 4 companies, such as Samsung etc, who have been conducting CSR for the past 10 years, as a sample. The relationship between the CSR and the corporate competence of these companies on purchasing intention was examined through questionnaires for general consumers. The results of this study show that CSR and CA have a positive effect on product attitude, and consumers' product attitude has a positive effect on purchase intention. In addition, CSR and CA were found to have a positive (+) effect on purchase intention through consumer attitude. Finally, it is found that the reputation of the firm has a moderating effect on the relationship between consumer's product attitude and purchase intention. This study suggests that CSR should be strategically promoted in order to positively shape the attitude of consumers toward products of companies and their companies. As a theoretical implication, this study showed that the effect of CSR activities and CA on consumer's product attitude and purchase intention, centered on mediating effects of product attitude and corporate reputation discrimination.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.197-210
• /
• 2012

In this research, we executed a questionnaire survey targeting men and women in 20' or more who reside in the metropolitan area and have experienced purchasing the vehicles in order to study how Promotion Mix Activity affects Brand assets, and ultimately what kind of relation it has with Purchase intention. In the statistical process of collected data, we analyzed the data by using SPSS 12.0 for Windows statistical package and AMOS 7.0 program. As the result of analysis, first, when we analyzed the relation of the Promotion Mix Activity and Brand Assets of the companies, the more affirmative the assessment on the advertising activities of the companies was, the higher the brand popularity, royalty and image increased, And it appeared that as the assessment on PR activities of the companies got more affirmative, the brand popularity, image and royalty increased. Second, as the result of the analysis of the relation between salespersons' Promotion Activities and Brand assets, it appeared that salespersons' social capacity improved Brand awareness and royalty and their strategic capacity improved Brand awareness, royalty and image. Third, seeing the result of the analysis on the relation between Brand assets and Purchase intention, it was shown that Brand popularity had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention, and Brand royalty had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention. In addition, it appeared that Brand image had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention, and finally it could be known that Brand assets had a close correlation with Purchase intention. Therefore, this research established the color marketing strategy as follows. First, we shall build up the functional role such as aesthetic favor, information communication, protection of ecosystem, publicity reinforcement etc. so as to emphasize the properties of the package design; second, we have to construct the color marketing strategy to convey the images of the commodity besides the psychological and physiological utility which colors grants, the utility used in visual conveyance as communication media; third, we should build the color marketing strategy for the integration of company image; finally we have to compose the colors fitted for the company and product style and introduce design marketing using company colors.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.120-128
• /
• 2005

ISO 9001, the quality management system issued by the International Organization for Standardization, is being used by architectural design and engineering firms in order to strengthen the capability of business activities through the implementation of the international and advanced quality management systems. However, there have been significant problems in stable implementation and settlement of ISO 9001 in construction industry, which seem to be caused by key employees' lack of proper recognition and comprehension. The purpose of this research, accordingly, is to find and analyze nonconformity results which were found when the third party registrars audited the conformity of companies' quality management systems for ISO 9001 certification especially in architectural design and engineering firms. For this purpose this research was conducted by a cluster analysis of 647 audit reports out of representative 15 architectural design and engineering firms that have been audited periodically from 1997 to 2003 by the third party registrars. The analysis showed that the most frequent problems were generated in the areas of $\ulcorner$Design and Development$\lrcorner$ , $\ulcorner$production and Service Provision$\lrcorner$ , and $\ulcorner$General requirements$\lrcorner$ of the quality management system. The following, the areas of $\ulcorner$Monitoring and Measurement$\lrcorner$ and $\ulcorner$purchasing$\lrcorner$ were also analyzed as main factors which caused frequent nonconformity results. This research also shows that the corrective actions for nonconformity results are closely connected with the whole management activities in architectural design and engineering firms. Consequently, corrective actions for disposition of nonconformities should be implemented more specifically in order to settle and activate the quality management systems in architectural design and engineering firms.

• Journal of Intelligence and Information Systems
• /
• v.27 no.3
• /
• pp.157-173
• /
• 2021

With the development of information technology, the amount of available information increases daily. However, having access to so much information makes it difficult for users to easily find the information they seek. Users want a visualized system that reduces information retrieval and learning time, saving them from personally reading and judging all available information. As a result, recommendation systems are an increasingly important technologies that are essential to the business. Collaborative filtering is used in various fields with excellent performance because recommendations are made based on similar user interests and preferences. However, limitations do exist. Sparsity occurs when user-item preference information is insufficient, and is the main limitation of collaborative filtering. The evaluation value of the user item matrix may be distorted by the data depending on the popularity of the product, or there may be new users who have not yet evaluated the value. The lack of historical data to identify consumer preferences is referred to as data sparsity, and various methods have been studied to address these problems. However, most attempts to solve the sparsity problem are not optimal because they can only be applied when additional data such as users' personal information, social networks, or characteristics of items are included. Another problem is that real-world score data are mostly biased to high scores, resulting in severe imbalances. One cause of this imbalance distribution is the purchasing bias, in which only users with high product ratings purchase products, so those with low ratings are less likely to purchase products and thus do not leave negative product reviews. Due to these characteristics, unlike most users' actual preferences, reviews by users who purchase products are more likely to be positive. Therefore, the actual rating data is over-learned in many classes with high incidence due to its biased characteristics, distorting the market. Applying collaborative filtering to these imbalanced data leads to poor recommendation performance due to excessive learning of biased classes. Traditional oversampling techniques to address this problem are likely to cause overfitting because they repeat the same data, which acts as noise in learning, reducing recommendation performance. In addition, pre-processing methods for most existing data imbalance problems are designed and used for binary classes. Binary class imbalance techniques are difficult to apply to multi-class problems because they cannot model multi-class problems, such as objects at cross-class boundaries or objects overlapping multiple classes. To solve this problem, research has been conducted to convert and apply multi-class problems to binary class problems. However, simplification of multi-class problems can cause potential classification errors when combined with the results of classifiers learned from other sub-problems, resulting in loss of important information about relationships beyond the selected items. Therefore, it is necessary to develop more effective methods to address multi-class imbalance problems. We propose a collaborative filtering model using CGAN to generate realistic virtual data to populate the empty user-item matrix. Conditional vector y identify distributions for minority classes and generate data reflecting their characteristics. Collaborative filtering then maximizes the performance of the recommendation system via hyperparameter tuning. This process should improve the accuracy of the model by addressing the sparsity problem of collaborative filtering implementations while mitigating data imbalances arising from real data. Our model has superior recommendation performance over existing oversampling techniques and existing real-world data with data sparsity. SMOTE, Borderline SMOTE, SVM-SMOTE, ADASYN, and GAN were used as comparative models and we demonstrate the highest prediction accuracy on the RMSE and MAE evaluation scales. Through this study, oversampling based on deep learning will be able to further refine the performance of recommendation systems using actual data and be used to build business recommendation systems.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.147-175
• /
• 2020

This study analyzed the effects that digital experience factors influence on purchase intention and the purchase. The study targeted an online shopping mall with a strong digital experience value among industries. The research model was derived by adding variables to independent and mediating variables according to the industry context of online shopping which is based on the theoretical background and previous studies. Product variety, price efficiency, convenience and conversation were used by terms of digital marketing mix as independent variables. Personalization has been very important factor in online shopping malls, and therefore added as a independent variable. Flow has been added as a mediating variable. Purchase and purchase intention has been used as dependent variables. For empirical testing of established research models and generalization of research results, research was conducted on online shopping malls where digital experiences are important. To do this, a survey was conducted for existing users of online shopping malls. In hypothesis testing, the hypothesis was established that product diversity, price efficiency, convenience, conversation and personalization influenced the intention to purchase online shopping. In particular, the product diversity and conversation variable were tested as the most influential factors on purchase intention. For price efficiency and personalization there were no statistically significant effect. Flow has been shown to be a partial mediator between Product variety and purchase intention in online shopping. In particular, in the case of personalization, it was tested to have a significant influence on purchase intention only when there was a flow experience called pleasure and immersion. This is because the flow experience of pleasure and immersion has played a full mediating role and significantly has affected the purchase intention, because the consumers themselves have to carry out the overall purchase journey without human help due to the nature of online. In the digital experience economy, since consumers are mostly digital consumers, where communication and sharing are the basics, they have been conducting digital word-of-mouth communication and sharing naturally before purchasing. Based on these results, theoretical and practical implications were suggested.

• Korea Trade Review
• /
• v.48 no.4
• /
• pp.303-320
• /
• 2023

Recently, import and export companies have been using T/T remittance and Surrender B/L more frequently than L/C when selecting the process and method of trade payment settlement. The new trade and logistics environment is thriving in the era of the Fourth Industrial Revolution (4IR). Document-based trade transactions are undergoing a digitalization as bills of lading or smart contracts are being developed. The purpose of this study is to verify whether exporters choose export payment types based on negotiating factors. In addition, we would like to discuss the application of the characteristics of the new trade and logistics environment. Data for analysis was collected through surveys. The collection method consisted of direct visits to the company, e-mail, fax, and online surveys. The survey distribution period is from February 1, 2023, to April 30, 2023. The questionnaire was distributed in 2,000 copies, and 447 copies were collected. The final 336 copies were used for analysis, excluding 111 copies that were deemed inappropriate for the purpose of this study. The results of the study are shown below. First, among the negotiating factors, the product differentiation of exporters did not significantly affect the selection of export payment types. Second, among the negotiating factors, the greater the purchasing advantage recognized by exporters, the higher the possibility of using the post-transfer method. In addition to analyzing the results, this study suggests that exporters should consider adopting new payment methods, such as blockchain technology-based bills of lading and trade finance platforms, to adapt to the characteristics of the evolving trade and logistics environment. Therefore, exporters should continue to show interest in initiatives aimed at digitizing trade documents as a response to the challenges posed by bills of lading. In future studies, it is necessary to address the lack of social awareness in Korea by conducting advanced research abroad.