• KSBB Journal
• /
• v.14 no.2
• /
• pp.230-234
• /
• 1999

To improve the crossflow untrafiltration flux, we applied periodic oscillations in transmembrane pressure gradient in order to promote fluid turbulence by inducing repeated compression and relaxation of the cake/gel layer. The oscillatory forms used were square-, sine-, triangle-wave, and pumping interruption. The permeate flux profiles were mathematically simulated and compared with the experimental data. The result showed the periodic pumping interruption most effectively improved the overall flux by up to about 32%. Enough pumping off-time, at least on the order of tens of seconds, was needed to allow the solutes in the layer to diffuse back to the bulk phase. It was better to start the oscillations earlier before the layer was fully established. The square-wave oscillation yielded about 11% increase, which was particularly pronounced in the later part of the filtration. Either the amplitude or the period of the oscillations resulted little influence on flux.actate ester, and lactate ester produced in esterification reaction was distilled simultaneously with hydrolysis reaction into lactic acid. When the yields of lactic acid recovered by batch reactive distillations with various alcohols were compared, the yield of lactic acid was increased as the volatility of lactate ester was increased. In this batch reactive distillation, because the mixtures condensed in partial condensor were flown to reboiler through distillation column, the recovery yield of lactic acid was affected by operation temperature of partial condensor. Hydrolysis reaction into lactic acid in distillation column rarelyoccurred because of short retention time of lactate ester and water. Lactate ester was reacted into lactic acid in reboiler.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.244-244
• /
• 2015

Managed Aquifer Recharge (MAR) in the form of Aquifer Storage and Recovery (ASR) systems are being applied for numerous water augmentation projects both in developed and developing countries. Given the onset of Climate Change and its influence on weather patterns and land use, it has been acknowledged the utilization of this technology will be ever increasing. This technique like all others does have its drawbacks or disadvantages, whereby to overcome these drawbacks or disadvantages it is recommended that logical planning process be followed. In this study, we developed a decision framework known as "Decision framework for the planning, designing, construction/testing and implementation of subsurface water storage system" to further standardize the planning and design process of subsurface water storage system to increase the probability of having a successful ASR/ASTR project. The formulation of this framework was based on earlier frameworks, guidelines, published papers and technical reports which were compiled into a data collection database. The database of which consider both qualitative and quantitative aspect for example recharge objectives, site location, water chemistry of the native, source and recovered water, aquifer characteristics(hydraulic conductivity, transmissivity, porosity), injection/pumping rate, ecological constraints, societal restrictions, regulatory restrictions etc. The assimilation of these factors into a singular framework will benefit the broad spectrum of stakeholder as it maps the chronological order under which ASR project should be undertaken highlighting at each stage the feasibility of the project. The final stage of which should result in fully operational ASR system. The framework was applied to two case studies and through the application of a modified ASR site selection suitability index (Brown et al., 2005) a score was derived to identify the performance of each site. A high score of which meant a maximize chance of success given the reduce presence of project constraints.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.5
• /
• pp.1-16
• /
• 2018

Recent development of lithium ion batteries for vehicles industries have led to a boom in lithium exploration and development for the new generation of batteries. One of the cheapest sources of lithium is the brines hosted in the aquifers of the arid intermontane-closed salar basins. Because the resource is a fluid, with the attendant problems of in-aquifer mixing, reorganization, and lower recovery factors compared with most metalliferous and industrial mineral deposits due to reliance on pumping of the brine from wells for extraction, existing codes for filing resource and reserve estimates require new approach for these prospects. Evaluation of brine resources is complex and requires participation of a variety of qualified experts such as hydrogeologists, geologists, geochemists and chemical engineers. The technical reports disclosing the results of these estimates should reflect the inputs of multi-disciplinary approaches. The requirements for brine resource and reserve evaluation, drawing on several examples from the experiences in the Central Andes are reviewed in this paper.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.739-741
• /
• 2001

Magnetic field distribution of rotating flux type Low-Tc superconducting (LTS) power supply with respect to the applied current on exciters is investigated in detail by using Finite Element Method (FEM). LTS power supply consists of two exciters, a rotor, a stator and superconductor foil attached to the inner surface of the stator and LTS load. The current pumping of LTS power supply is induced by partial-quenching and recovery of superconductor foil. For this reason, magnetic flux density on superconductor foil must be sufficiently greater than the its critical magnetic density. In this analysis, the normal spot on superconductor foil appears more than 10A of excitation current. The results of this analysis are calculated and compared with the experimental results.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.23-33
• /
• 2002

There are two case history. One is the case of 3 wells-group well system-drilled and artificially hydrofractured for dewatering to help to excavate and treat deep building foundation. The recoveries of groundwater of 3 wells are increased 29%, 42% and 110% respectively through hydrofracturing. Simultaneous pumping test reveals that 3 wells are geohydrologically interconnected considering lowered specific capacity comprising influence of additional drawdown effect by other 2 wells compared to single well test. Response time effect during single well test shows that dorminant lineaments are more expandable to other geological structures. The other one is the case of 28% increasing of groundwater productivity for domestic use by hydrofracturing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.207-207
• /
• 2015

지표수 수자원은 다른 형태의 수자원에 비하여 경제성은 우수하나 환경 훼손, 시공간적 변동성에 대한 취약성, 각종 수질 위협요소에 노출되는 단점 을 가지고 있다. 지표수 수자원과는 달리 Aquifer Storage Transportation and Recovery (ASTR) System을 이용한 지하저수지는 수자원의 안전한 확보, 환경문제 등의 측면에서 새로운 대안으로 제시되고 있다. '청정지하저수지연구단'에서 연구하고 있는 '대규모청정지하저수지'는 피압대수층에 담수를 주입하여 형성된 담수체를 수자원으로 이용한다. 본 연구는 피압대수층 주입정 및 양수정 운영에 따른 지반영향을 연구하였다. 과거 지반변형을 고려하지 않은 무분별한 피압대수층의 지하수 개발로 태국, 중국 등지에서 심각한 지반침하를 야기하였으며 이에 대한 대책으로 인공함양이 이루어진바 있다. 피압대수층 상부에 위치한 점토층은 지반변형에 가장 큰 영향을 미치며 점토층의 변형 혹은 파괴 시 지하수 이용 및 인간의 활동에도 영향을 끼칠 수가 있다. 본 연구의 목적은 주입 및 양수가 점토층에 미치는 영향을 분석하고 지반변형을 허용 범위 내로 국한시키기 위해서 피압대수층에 가할 수 있는 최대 수위변화량을 산정하는 데 있다. 양수로 수두가 감소하는 경우 유효응력 증가에 따른 지반침하가 우려되며, 주입으로 수두가 상승하는 경우 지반파괴가 야기될 수 있다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.8-12
• /
• 1999

$\textrm{WO}_3$ semiconductive film, which is known to have a sensitivity on $\textrm{NO}_X$ gas was prepared on 8YSZ (8% Yttria stabilized $\textrm{ZrO}_2$) ionic conductor substrate that has oxygen ion pumping effect. Microstructure and electrical properity, especially $\textrm{NO}_X$ sensitivity as a function of DC voltage applied to 8YSZ substrate was examined. When the $\textrm{WO}_3$ film was annealed, it showed amorphous structure, while crystallization was occurred at $600^{\circ}$C revealing orthorhombic phase of $\textrm{WO}_3$. As the annealing temperature increases, (111) and (001) peaks of $\textrm{WO}_3$ film was enhanced. At $400^{\circ}C$ when DC voltage was applied, comparing with no DC bias, more stable and large response characteristics was showed, and the best sensitivity was observed at 2V. Recovery characteristics of NO gas was much better that that of $\textrm{NO}_2$ gas.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.3
• /
• pp.74-85
• /
• 2003

To increase the yield from groundwater wells in various rock types by hydrofracturing, tests of 12 wells were carried out as a part of sustainable groundwater development and artificial recharge project. Test wells are selected 5 wells in Jurassic granites, 2 wells in Cretaceous volcanics, 4 wells in Cretaceous sedimentary rocks and one well in Pre-Cambrian gneiss. The results show that specific capacity of II wells increased about 7% to 366%, while a well in Cretaceous sedimentary rock decreased about 43.4% owing to plugging of fault clay. Meanwhile, impact distances influenced due to hydrofracturing ranged from 5.4 m to 82.7 m from the test wells, actual drawdown data measured during the pumping test after hydrofracturing are more or less decreased and reveals balanced drawdown.

• 한국해양학회지
• /
• v.26 no.4
• /
• pp.324-331
• /
• 1991

Laboratory experiments were undertaken in mixing chamber to study the water-in-oil emulsion formation tendency, stability and formation rate of 16 crude oils. Arabian, Iran, Dubai, Isthmus and Daekyung crudes showed high emulsion formation tendency and had water contents of 80-90%. Emulsions of crude oils of middle East were very stable, while Isthmus and Daekyung sudes formed unstable emulsion. Emulsion formation tendency rate, and stability showed significant correlations with asphaltene content of crude oil. To evaluate the possibility of preventing mousse formation, inhibition ability of several dispersants and demulsifier was tested. They inhibited mousse formation at 0.1-0.2% concentrations (v/v). Emulsion inhibition by chemical treatment delayed the time of formation, but did not decrease water content. Demulsifying ability of dispersants and demulsifier was tested because biscous emulsion causes formidable problems in skimming, pumping and recovery operation. British demulsifier Alcohol 0 showed excellent emulsion breaking efficiency at 0.1% of emulsion Vol..

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.333-336
• /
• 2001

The transient response in PDFA(Praseodymium-Doped Fiber Amplifier) is theoretically investigated. The PDFA has the spectral gain band in 1.3${\mu}{\textrm}{m}$. The transient model includes the transient buildup of the population inversion, the pump power, and the signal power and their transient variation along the fiber amplifier. The numerical analysis of transient model can predict the gain saturation, the variation of pump power and the gain as a function of the fiber length. It also shows the gain saturation and recovery effects depending on the pumping rate lead to distortion and saturation in the amplification of optical pulse. The results of numerical analysis, for the case of the Pr ion concentration of 1000ppm and the pump power of 0.5W the gain saturation is obtained 30dB at the length of 5m and the saturation time of upper level is 250 $mutextrm{s}$.