• Agribusiness and Information Management
• /
• v.9 no.1
• /
• pp.7-17
• /
• 2017

Agricultural water management has gained enormous attention in the developing world to alleviate poverty, reduce hunger and conserve ecosystems in small-scale production systems of resource-poor farmers. The story of food security in the $21^{st}$ century in India is likely t o be closely linked to the story of water security. Today, the water resource is under severe threat. The past experiences in India in general and in Andhra Pradesh in particular, indicated inappropriate management of irrigation has led to severe problems like excessive water depletion, reduction in water quality, water logging, salinization, marked reduction in the annual discharge of some of the rivers, lowering of ground water tables due to pumping at unsustainable rates, intrusion of salt water in some coastal areas etc. Considering the importance of irrigation water resource efficiency, Krishna Western Delta (KWD) of Andhra Pradesh was purposively selected for this in depth study, as the farming community in this area are severely affected due to severe soil salinity and water logging problems and hence, adoption of different water saving crop production technologies deserve special mention. It is quite disappointing that, canals, tube wells and filter points and other wells could not contribute much to the irrigated area in KWD. Due to less contribution from these sources, the net area irrigated also showed declining growth at a rate of -6.15 per cent. Regarding paddy production, both SRI and semi-dry cultivation technologies involves less irrigation cost (Rs. 2475.21/ha and Rs. 3248.15/ha respectively) when compared to transplanted technology (Rs. 4321.58/ha). The share of irrigation cost in Total Operational Cost (TOC) was highest for transplanted technology of paddy (11.06%) followed by semi-dry technology (10.85%) and SRI technology (6.21%). The increased yield and declined cost of cultivation of paddy in SRI and semi-dry production technologies respectively were mainly responsible for the low cost of production of paddy in SRI (Rs. 495.22/qtl) and semi-dry (Rs. 532.81/qtl) technologies over transplanted technology (Rs. 574.93/qtl). This clearly indicates that, by less water usage, paddy returns can be boosted by adopting SRI and semi-dry production technologies. Both the system-level and field-level interventions should be addressed to solve the issues/problems of water management. The enabling environment, institutional roles and functions and management instruments are posing favourable picture for executing the water management interventions in the State of Andhra Pradesh in general and in KWD in particular. This facilitates the farming community to harvest good crop per unit of water resource used in the production programme. To achieve better results, the Farmers' Organizations, Water Users Associations, Department of Irrigation etc., will have to aim at improving productivity per unit of water drop used and this must be supported through system-wide enhancement of water delivery systems and decision support tools to assist farmers in optimizing the allocation of limited water among crops, selection of crops based on farming situations, and adoption of appropriate alternative crops in drought years.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.72-72
• /
• 2015

메모리 반도체 세계 시장 점유율 1위 뿐만 아니라 국내 전체 산업 가운데 가장 중추적인 역할을 하는 반도체 산업의 지속적인 성장과 국가 경제의 발전을 위해서 소자 업체 뿐만 아니라 장비, 소재, 부품 산업의 동반 성장은 반드시 필요하다. 그 중에서 특히 소재, 부품 산업을 발전시키는 것이 국산 반도체 장비의 시장 점유율이 낮은 현 시점에서 가장 필요한 선택이다. 반도체 소재, 부품 산업의 발전을 위해서 제일 먼저 해야할 일은 영세한 국내 반도체 소재, 부품 산업을 활성화 시키는 것이며, 지속 적인 연구 개발, 성능 평가 방안 확보, 수요 업체와의 연계 방안 확보 등이 주요 현안이다. 반도체 소자 업체, 장비 업체에서 원하는 소재 및 부품의 성능을 만족하는 제품을 만들기 위해서는 우선 소재 및 부품의 기본 특성을 만족하는지에 대한 평가가 필요하고, 더 나아가서는 디바이스의 특성을 만족시켜줄 수 있는 한 단계 상향된 수요자의 요구 조건을 만족 시켜줄 수 있어야 한다. 본 연구에서는 그 중 특히 중요한 요소인 성능 평가에 대해서 논하고자 한다. 우선 반도체 공정용 소재에 대해서 살펴 보면 대표적인 반도체 소재로 증착용 Precursor, Photo Resistor, Sputter Target 등이 있다, 평가 방법으로는 ALD용 Precursor의 경우 대기 노출시 폭발, 화염 발생 등의 위험 요소를 안고 있어 특별한 주의가 요구 된다. PR이나 Sputter Target은 상대적으로 위험성은 적으며, 다양한 성능 평가 들이 가능하다. 다음으로 부품 평가에 대해서 살펴 보자. 본 원에서 가장 많이 진행된 부품 평가는 개발된 Pump의 성능 평가이다. 개발된 Pump는 1차적으로 KRISS 진공센터 에서 기본 Pumping 능력 평가를 실시하고, 다음으로 공정 평가를 실시한다. Pump마다 특성이 달라서 각 펌프의 성능 평가에 적합한 공정과 장비를 우선 선정하고 그에 합당한 공정을 진행하여 평가를 실시한다. 고 진공용인 Cryo Pump는 순수한 물질의 증착이 중요한 Metal Sputter 공정 장비에 장착하여 공정용 Gas를 흘리면서 Pump의 구동에 따른 성능 평가를 하고, 다음으로 실제로 Metal Sputter를 실시해서 Wafer에 증착된 물질의 특성을 확인한다. 다음으로 Turbo Pump의 경우 Etch 장비에 장착하여 Etch Uniformity, Etch Rate, By-product 배출 정도에 대해서 평가를 한다. Dry Pump는 비교적 공정 압력이 낮은 PECVD 공정 장비에서 평가를 진행 한다. 마지막으로 공정 진단, 챔버 상태 진단 등을 할 수 있는 별도의 부품 또는 장치로 PBMS, PCDS, OES 등의 평가에 대해서 논한다. 본 장치들은 실제 반도체 공정 장비와 환경에서 평가가 되어야지만 최종 사용자 입장에서 신뢰를 가지고 결과에 대해서 접근할 수 있다. 위에 논의된 장치들은 현재 공정 장비에 부착되어서 판매 되고 있는 것이 아니라 수요가 많지 않으나, 자체 성능 개선과 적합한 평가를 통해서 장치의 성능이 인정되면 300 mm 이상 Wafer 공정에서 반드시 필요한 실시가 공정 진단을 위해서 폭발적인 수요를 창출할 수 있으리라 본다.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.347-355
• /
• 2002

We have constructed a high efficiency and broad tunable cw Ti:sapphire laser with a four-mirror symmetric Z-type laser cavity to increase the laser usability. From theoretical analyses and experimental data for a symmetric Z-type laser cavity containing a Kerr medium, the cavity mode size and the Kerr-lens mode-locking (KLM) strength for KLM lasers can be confirmed as function of the position in the cavity, the intracavity laser power, and the stability parameter. As a result, the slope efficiency and the maximum average output power of cw Ti:sapphire laser at 5 W pumping power of Ar-ion laser were 31.3% and 1420 ㎽ respectively. The tunablility was ranged from 730 ㎚ to 908 ㎚ with average output power above 700 ㎽. We obtained the KLM operation easily by self-aperturing effect in the Kerr medium and the slope efficiency and the maximum average output power of KLM Ti:sapphire laser was 16% and 550 ㎽ respectively. The spectral bandwidth was 33 ㎚ at the center wavelength of 807 ㎚ and the pulse width was 27 fs with a repetition rate of 82 ㎒.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2009

Groundwater flow due to intake of horizontal collector well in riverbank filtration site was analyzed by use of numerical groundwater modeling program (FEFLOW 5.1). Drawdowns of groundwater table nearby collector well were evaluated according to variations of several conditions; pumping rate, thickness of aquifer, offset distance from well to shore line of stream, conductance of streambed. It is observed that the drawdowns of groundwater table are clearly changed according to the variations of these conditions. The results of sensitive analysis shows that the thickness of alluvial aquifer and the offset distance are more sensitive than the conductance of streambed in evaluation of drawdown. This result implies that hydrogeological conditions, as like thickness of aquifer and its distribution in the site are important factors in site selection and evaluating the availability of riverbank filtration intake using horizontal collector well system. It is also revealed that numerical modeling using FEFLOW with 1-D discrete element feature can give efficient quantitative evaluation of horizontal collector well and estimation of availability of riverbank filtration site.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.269-277
• /
• 1996

The vacuum systems of PLS linac provides average pressure of $2.6\times 10^{-6}$Pa under high power microwave of 54 MW peak with 4.1 $\mu \textrm s$ pulse width and 10 Hz repetition rates. The base pressure of system is$2.4\times 10^{-6}$Pa with 45$^{\circ}C$ cooling water. The outgassing rate of the system is decreased from $3.0\times 10^{-11}Torr-l/sec-\textrm{cm}^2$ at the initial stage after installation to $1\times 10^{-12}Torr-l/sec-\textrm{cm}^2$ at present. Total accumulated microwave energy dose is about 140 GJ per module. All ion pumps are working under saturated regime and effective pumping speeds of 60 I/s, 230 I/s ion pumps are 45 I/s, 65 I/s, 140 I/s under the operating range. Main problems occurred in recent year are troubles of ion pump controller and vacuum gauge controller, vacuum leak of energy doubler window and electron gun ceramic, and water leak in the dummy load of acceleraing columns. Total of 41 troubles with 140. 8 hours down time give good system availability of 98%. Down time can be reduced by high power waveguide valves and water dummy loads under development, and then availability is expected to be increased up to 99.5%.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.168-173
• /
• 2013

In this paper, we would like to introduce Electron Relay Enhancer (ERE), a supplementary device, which improves commercial solar cell efficiency minimizing electron-hole recombination of solar cell. The ERE in this study is mainly composed of two capacitors which are connected to AC power source and bridge diode system which controls electron flow direction. Two capacitors repeat collecting electrons from solar cell and pumping the collected electrons to load resistance or inverter through the bridge diode system. While one positively charged capacitor collect electrons, the other negatively charged one pumps electrons. A positively charged capacitor pulls the more exited electrons from the solar cell, before the exited electrons recombine the holes in solar cell. That is why the ERE system enhances solar cell efficiency. As a result, the measured power increase of the solar cell with the ERE is varied from 5.9 W to 25.6 W in each experimental condition. Maximal increase rate of the solar cell power with ERE is 30.8% of solar cell power without ERE.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.22-29
• /
• 2011

Rhodopsin is a membrane protein with seven transmembrane region which contains a retinal as its chromophore. Although there have been recently reports on various photo-biochemical features of rhodopsins by a wide range of purifying and measurement methods, there was no actual comparison related to the difference of biochemical characteristics according to their physical environment of rhodopsins. First, proteorhodopsin (PR) was found in marine proteobacteria whose function is known for pumping proton using light energy. Second one is Anabaena sensory rhodopsin (Nostoc sp.) PCC7120 (ASR) which belongs to eubacteria acts as sensory regulator since it is co-expressed with transducer 14 kDa in an operon. In this study, we applied two types of rhodopsins (PR and ASR) to various environmental conditions such as in Escherichia coli membranes, membrane in acrylamide gel, in DDM (n-dodecyl-${\beta}$-D-maltopyranoside), OG (octyl-${\beta}$-D-glucopyranoside), and reconstituted with DOPC (1,2-didecanoyl-sn-glycero-3-phosphocholine). According to the light-induced difference spectroscopy, rhodopsins in 0.02% DDM clearly showed photointermediates like M, and O states which respond to the different wavelengths, respectively and showed the best signal/noise ratio. The laser-induced difference spectra showed the fast formation and decay rate of photointermediates in the DDM solubilized samples than gel encapsulated rhodopsin. Each of rhodopsins seemed to be adapted to its surrounding environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.8
• /
• pp.798-807
• /
• 2008

Due to economic impairment derived from metal corrosion of pumping station installed around coastal area, it was needed for related cause-effect to be investigated for understanding practical corrosion behavior and providing proper control. This research was thus carried out to determine whether the microbe can influence on metal corrosion along with its control in the laboratory. For this study, groundwater was sampled from the underground pump station(i.e. I Gas Station) where corrosion was observed. Microbial diversity on the samples were then obtained by 16S rDNA methods. From this, microbial populations showing corrosion behaviors against metals were reported as Leptothrix sp.(Iron oxidizing) and Desulfovibrio sp.(Sulfur reducing) Iron oxidizing bacteria were dominantly participating in the corrosion of iron, while sulfate reducing bacteria were more preferably producing precipitate of iron. In case of galvanized steel and stainless steel, iron oxidizing bacteria not only enhanced the corrosion, but also generated its scale of precipitate. Sulfate reducing bacteria had zinc steel corroded greater extent than that of iron oxidizing bacteria. In the inactivation test, chlorine or UV exposure could efficiently control bacterial growth. However as the inactivation intensity being increased beyond a threshold level, corrosion rate was unlikely escalated due to augmented chemical effect. It is decided that microbial corrosion could be differently taken place depending upon type of microbes or materials, although they were highly correlated. It could be efficiently retarded by given disinfection practices.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.25-32
• /
• 2010

High performance shotcrete has been recently researched partly as a result of high consensus on high strength and durability. However, they are very initial step compared from the advanced countries. For instance, they has been mainly on high strength or durability without any consideration on pumpability and shootability which are very crucial on workability. The purpose of this dissertation was to make a high performance wet-mix shotcrete (high workability) which would solve the general problems of wet-mix process in Korea. For this, the main experimental variables were selected to be silica fume(0.0, 4.5, 9%), air entrained agent(0.0, 0.005%). Rheology with IBB rheometer was measured for evaluating pumpability and shootability as well as pump pressure, rebound rate and build-up thickness. The conclusions from a series of experiments were as follow: The results of analyzing the effects of AE agent and silica fume on rheology indicated that AE agent reduced both of flow resistance(G) and torque viscosity(H) and silica fume increased flow resistance (G) and reduced torque viscosity(H). An increase in the value of torque viscosity(H) produces an increase in the requried pumping pressure. These result indicated that the reduction of torque would work better at improving pumpability. And an increase flow resistance(G) improved shootability(increase build-up thickness and reduce rebound).

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2008

The causes of salt accumulation in soils of plastic film houses nearby Sumjin river estuary in Mokdo-ri($127^{\circ}46'E\;35^{\circ}1'N$), Hadong, Gyeongnam, Korea were investigated in 2006. With chemical properties soils and water analyzed and fertilization status monitored, the study showed that mean salt concentration of soil was much higher at EC $4.3\;dS\;m^{-1}$ than the Korean average (EC $2.9\;dS\;m^{-1}$) in 2000s for plastic film house's soil with exchangeable Na $0.8\;cmol^+\;kg^{-1}$ and water-soluble Cl $232\;mg\;kg^{-1}$, and then might result to salt damage in sensitive crop plants. Salt concentration of ground water used as main irrigation water source contained very high EC with corresponding value of $2.6\;dS\;m^{-1}$. Particularly, increase of EC value was directly proportional with the increased pumping of ground water used as a water-covering system in order to protect the temperature inside plastic film houses from the early winter season. High Na and Cl portion of ions in water might had contributed to the specific ion damage in the crops. Secondly, heavy inputs of chemicals and composts significantly increased the accumulated salts in soil. Conclusively, salt accumulation might had been accelerated by use of salted-groundwater irrigation and heavy fertilization rate. To minimize this problem, ensuring good quality of irrigation water is essential as well as reducing fertilization level.