• 제목/요약/키워드: Pump spot

검색결과 20건 처리시간 0.023초

마이크로 칩 Yb:YAG 레이저의 동작 및 열적 특성 (Operational and Thermal Characteristics of a Microchip Yb:YAG Laser)

  • 문희종;홍성기;임창환
    • 한국광학회지
    • /
    • 제22권2호
    • /
    • pp.96-101
    • /
    • 2011
  • 본 논문에서는 930 nm 대역 광섬유 결합 레이저 다이오드 여기광을 0.8 mm 두께의 얇은 디스크형 Yb:YAG 결정에 조사하여 레이저 발진 특성을 연구하였다. 구멍이 있는 구리판 사이에 레이저 결정을 고정시켜 발생된 열을 접촉 냉각시키는 구조를 채택하였고, 구리판 구멍 크기에 따른 조사 지점의 온도 변화를 발진 피크 스펙트럼 이동으로부터 조사하였다. 광섬유 결합 LD 여기 광에 대해 발진 레이저 출력은 기울기 효율 42.2%, 광변환 효율 34.8%로 높게 구현되었다. LD 여기 전류 및 구리판 구멍 크기가 증가함에 따라 여기광이 조사된 지점의 온도가 증가하였다. 구리판 구멍 크기가 결정 두께에 비해 상당히 큰 경우, 높은 여기광의 세기에서는 온도 상승이 선형 변화로부터 벗어남을 확인하였다.

Effect of Degradation Processes on Optimal Remediation Design Sorption and First-Order Decay Rate

  • Park, Dong-Kyu;Ko, Nak-Youl;Lee, Kang-Kun
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.503-508
    • /
    • 2004
  • Optimal remediation design using the pump and treat(P&T) method and natural attenuation was accomplished in consideration for degradation processes, such as sorption and first-order decay rate. Variation of both sorption and first-order decay rate has influence on design of optimal remediation application. When sorption effect increases, the more pumping rate and pumping wells are required. The location of operated wells is on the centerline of contaminant plume and wells near hot spot are mainly operated when sorption effect increases. The higher of first-order decay rate, the less pumping rate is required. These results show that the degradation processes have to be considered as one of the essential factors for optimal remediation design.

  • PDF

Operating analysis of linear type magnetic flux pump

  • Chung, Y.D.;Yang, S.E.;Ko, T.K.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권2호
    • /
    • pp.20-24
    • /
    • 2009
  • In order to explain the operating characteristics of LTMFP in a wide range of driving frequency, an analytical equation that takes into account the detailed behavior of the normal spot is necessary. In this paper, based on the phenomenon of magnetic diffusion of the superconductor we modified the theoretical equations for pumping action in LTMFP. The modified equations explained well the pumping actions under the different load magnets. These results are important to explain the pumping tendency of the LTMFP according to driving frequency.

고리1호기 원자로 냉각재 유량상실사고 해석 (The Loss of Coolant Flow Accident Analysis in Kori-1)

  • Kook Jong Lee;Un Chul Lee;Jin Soo Kim;Si Hwan Kim
    • Nuclear Engineering and Technology
    • /
    • 제17권4호
    • /
    • pp.256-266
    • /
    • 1985
  • 냉각재 유량상실 사고가 가압경수형 원자로인 고리 1호기에 대하여 해석되었다. 냉각재 유량 상실 사고는 그 심각도에 따라 다음과 같이 3가지로 분류된다. 즉, 일부 유량 상실사고, 완전 유량 상실 사고, 그리고 펌프 축 고착 사고이다. 사고 해석은 계통 과도 현상 및 평균 노심분석, DNBR 계산, 그리고 고온점 분석의 3단계로 수행된다. 원자로 계통과도 현상 코드인 KTRAN이 본 사고를 빠른 시간에 모사할 수 있도록 개발되었다. DNBR계산을 위해서는 열수력학 코드인 SCAN및 COBRA IV-I가 채택되었으며, 고온점 분석을 위해서는 연료봉 과도 현상 코드인 LTRAN이 쓰였다. 이러한 전산코드 시스템은 과도 현상 해석에 빨리 응답하여야 한다. 왜냐하면 사고가 발생한 후 수 초안에 심각한 상태에 이르기 때문이다. 불행히도 KTRAN코드에 의하여 이러한 목적은 충족되지 않았다. 그러나 다른 계통 해석 코드에 비하여 잔은 계산 시간에도 불구하고 KTRAN에 의한 계산 결과는 FSAR의 결과와 전반적으로 잘 일치함으로써 KTRAN코드가 사고 해석에 유용함이 밝혀졌다.

  • PDF

폴리머의 레이저 투과접합 시 접합부의 기계적 성질에 관한 연구 (A Study on the Mechanical Properties of Joints in Laser Transmission Joining of Polymers)

  • 차상우;김진범;윤석환;나석주
    • Journal of Welding and Joining
    • /
    • 제25권2호
    • /
    • pp.43-48
    • /
    • 2007
  • Laser Transmission Joining (LTJ) of plastics is a process in which light of suitable wavelength is transmitted through a transparent substrate that is in contact with an absorbing one. In this paper, LTJ is investigated by preliminary experiments from the viewpoint of mechanical engineering. To understand transmitting characteristics of each polymer substrate, transmission rate, reflection rate and absorption coefficient of polymer are measured by using a laser power-meter. Characteristics of joining in the spot welding and seam welding are investigated by measuring the fracture load. Fracture load increases in accordance to the laser power and irradiation time. However, when the laser power is over 60W and irradiation time over 4seconds, fracture load decreases. This phenomenon is probably due to heat-softening of materials. Besides, cavities are generated at a joint by evaporation of water molecules, which can be suppressed by introduction of a gap between two substrates.

휴반 살포용 노즐의 분무특성에 관한 연구 (A Study on the Characteristics of the Spraying Nozzle on Paddy Levee)

  • 최규홍;손낙율
    • 한국농공학회지
    • /
    • 제17권2호
    • /
    • pp.3758-3762
    • /
    • 1975
  • In order to find out the optimum size of nozzle of the power sprayer in the paddy field, four different sized hole of nozzles were tested on its discharge volume per unit time and its effective covering distance. 1. The discharge rate of each nozzle is proportional to square root of the transmitted internal pressure of liquid, and the discharge coefficient ranges from 0.82 to 0.86 at the pressure of 20 to 30 kg/$\textrm{cm}^2$. 2. The effective covering distance is increased as the size of the hole is larded and also the pressure is increased under under the limited pressure. Generally, the effective covering distance is not greatly increased at the pressure of above 25kg/$\textrm{cm}^2$. The distance from the nozzle to the spot where the largest amount of droplets are dropped is about 14.5m for 3.05mm nozzle and 16m for 4.05mm nozzle in the pressure range from 20 to 25kg/$\textrm{cm}^2$. 3. From the above results it is concluded that the 3mm nozzle with the power sprayers, which are now being supplied to the farmers, can be used for disease and insect control on the paddy field of which block size is 30m${\times}$100m, and operators need not to enter the field for spraying. For the 40m${\times}$100m block, 4mm nozzle should be used with large size of pump which discharge capacity is 60l/min or more.

  • PDF

고설 딸기 관부 난방시스템의 에너지 절감 효과 (Energy Saving Effect for High Bed Strawberry Using a Crown Heating System)

  • 문종필;박석호;권진경;강연구;이재한;김형권
    • 생물환경조절학회지
    • /
    • 제28권4호
    • /
    • pp.420-428
    • /
    • 2019
  • 본 연구에서는 고설 딸기 관부(크라운부) 난방시스템을 전기 온수 보일러, 축열조, 순환 펌프, 관부난방 배관(백색 연질 PE관, 관경 16mm) 및 온도 제어반으로 구성하였다. 관부(크라운부) 난방의 경우 난방 배관을 딸기 관부에 최대한 밀착될 수 있도록 설치하고 배관 위치를 원예용 고정핀으로 고정하였다. 또한 관부 난방시스템의 에너지 효율을 증진하기 위해 축열조 온수 온도를 $20{\sim}23^{\circ}C$, 관부 온도를 $13{\sim}15^{\circ}C$로 관리하였다. 관부난방은 전기 온수보일러를 이용하여 $20{\sim}23^{\circ}C$의 온수를 축열조에 저장하고 순환펌프를 제어하기 위한 온도 센서를 딸기의 관부에 최대한 근접하여 설치하고 온도를 감지함으로써 관부(크라운부)를 집중적으로 난방하는 방식이다. 시험 온실의 난방 처리는 공간 난방 $4^{\circ}C$ + 관부난방(처리 1), 공간 난방 $8^{\circ}C$ (대조구), 공간 난방 $6^{\circ}C$ + 관부난방(처리 2)로 처리하였다. 각 난방처리는 온실 1동에 딸기를 980주를 심었으며, 재배방법은 표준재배법에 준해서 재배하였다. 난방 에너지 소비에 대한 비교시험은 2017년 11월 8일부터 2018년 3월 30일까지 수행되었다. 소비된 누적 전력량은 등유 사용량으로 환산하였고, 등유 소비량은 공간난방 $8^{\circ}C$(대조구)의 경우 1,320L(100%), 공간난방 $4^{\circ}C$ + 관부난방의 경우 928L(70.3%), 공간난방 $6^{\circ}C$ + 관부난방의 경우 1,161L (88%)로 계측되었다. 공간난방 $4^{\circ}C$ + 관부난방(처리 1) 및 공간난방 $6^{\circ}C$ + 관부난방(처리 2)은 $8^{\circ}C$ 공간난방(대조구)에 비해 생육 저하, 수확시기의 지연 등이 없이 비슷하게 딸기 수확이 가능하였으며, 29.7% 및 12%의 난방 에너지가 절감되는 것으로 분석되었다.

전자빔 조사에 의한 탄소상 탐침의 성장 (Carbon tip growth by electron beam deposition)

  • 김성현;최영진
    • 한국진공학회지
    • /
    • 제12권2호
    • /
    • pp.144-149
    • /
    • 2003
  • 주사전자현미경을 이용한 전자빔의 직접조사에 의해 실리콘 캔틸레버 위에 탄소상 탐침을 성장하였다. 오일확산 펌프의 잔류가스 분위기에서 실리콘 캔틸레버와 전자빔을 수직으로 정렬한 다음 전자현미경의 스폿 모드를 통해 전자빔을 일정시간 동안 조사시켜 탄소상 탐침을 성장시켰다. 주사전자현미경의 제어변수인 조사시간, 가속전압, 방출 전류, 전자빔 프로브 전류 등을 변화시킴으로써 다양한 종횡비를 가지는 탐침을 성장시킬 수 있었으며, 성장 위치의 표면 형상과 무관하게 탐침을 성장시킬 수 있었다. 그 결과 유효길이 0.5 $\mu\textrm{m}$, 바닥직경 90 nm,콘의 반각 $3.5^{\circ}$인 탐침을 성장시켰다. 탐침이 없는 캔틸레버에 고종횡비 탄소상 탐침을 성장시킬 수 있는 기술은 PZT 박막구동기가 집적화된 AFM 캔틸레버의 탐침 형성 과정에서 발생하는 제작과정의 번거로움을 극복하는데 적용될 수 있다.

Growth of ZnTe Thin Films by Oxygen-plasma Assisted Pulsed Laser Deposition

  • Pak, Sang-Woo;Suh, Joo-Young;Lee, Dong-Uk;Kim, Eun-Kyu
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.185-185
    • /
    • 2011
  • ZnTe semiconductor is very attractive materials for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. Another application to photovoltaics proved that ZnTe is useful for the production of high-efficiency multi-junction solar cells [2,3]. By using the pulse laser deposition system, ZnTe thin films were deposited on ZnO thin layer, which is grown on (0001) Al2O3substrates. To produce the plasma plume from an ablated ZnO and ZnTe target, a pulsed (10 Hz) YGA:Nd laser with energy density of 95 mJ/$cm^2$ and wavelength of 266 nm by a nonlinear fourth harmonic generator was used. The laser spot focused on the surface of the ZnO and ZnTe target by using an optical lens was approximately 1 mm2. The base pressure of the chamber was kept at a pressure around $10^{-6}$ Torr by using a turbo molecular pump. The oxygen gas flow was controlled around 3 sccm by using a mass flow controller system. During the ZnTe deposition, the substrate temperature was $400^{\circ}C$ and the ambient gas pressure was $10^{-2}$ Torr. The structural properties of the samples were analyzed by XRD measurement. The optical properties were investigated by using the photoluminescence spectra obtained with a 325 nm wavelength He-Cd laser. The film surface and carrier concentration were analyzed by an atomic force microscope and Hall measurement system.

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.