• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.282-288
• /
• 2014

In this research, we investigated synthetic method of 2,6-DANT that can be used as a chain extender of urethane/urea and epoxy materials in a demilitarization method via chemical transformations considering environmental, economical aspects and stability of process. We was able to identify through GC monitoring that 2,4-DANT and 2,6-DANT were produced when we inject 'hydrazine monohydrate 3.3 eq. by TNT 1 eq.' with a fine metering pump for 30 minutes and then, reflux for an additional 2 hours. We was able to isolate only 2,6-DANT(99.3% purity and 45.0% yield) from mixture of 2,4-DANT and 2,6-DANT through the separating and refining methods using 2,6-DANT solubility in methanol and crystallinity of 2,6-DANT.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.334-334
• /
• 2010

반도체 소자 제조 공정에 사용되는 공정 펌프는 전체 소요되는 에너지(소비전력)에 52%를 소비하고 있다. 이러한 이유 때문에 반도체 fab 내에서 에너지 절감을 논의할 때 항상 공정용 진공 펌프가 1 순위에 오를 수밖에 없는 것이다. 반도체 공정용 진공 펌프는 사용되어지는 공정에 따라 유지되는 진공도가 달라지고 이에 따라 소비전력과 투입되는 utility의 양이 바뀌게 되어 진공도와 공정에 따른 에너지 소비의 pattern이 다르다. 한국표준과학연구원 진공센터에서는 각 공정 대응용 펌프의 종류에 따라 배기속도, 도달진공도, 소비전력, 진동, 소음 등 기본 펌프 성능 평가, light gas인 helium에 대응하는 기본 성능평가를 실시하고 있다. 또한 부가적으로 soft/medium 공정용의 경우 저전력 mode의 소비전력의 진공도에 따르는 측정변수의 pattern을 측정/분석하고 있으며, harsh 공정용의 경우 50~300 slm의 유량 주입에 따른 내구성 특성을 monitoring하고 있다. 드라이펌프의 기본적인 평가 성능과 각 회사의 SPM (single pump monitoring system) 측정 변수인 온도, 배기구 압력 변화 등의 자체 진단 인자를 포함하여 반도체 공정에서 드라이 펌프의 운용에 필요한 냉각수, $N_2$, 등과 같은 utility의 사용량 및 온도변화 등을 측정하여 드라이 펌프의 에너지 소비 pattern을 분석하고자 한다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.127-135
• /
• 2017

In this study, a cold well and a warm one with the distance of 100 m were installed in the alluvial aquifer. Groundwater used as the heat and the cold source of heat pump was designed to flow into the warm and the cold well with a diameter of 200 mm. In order to increase the heat and cold storage in aquifer, six auxiliary wells with the diameter of 50 mm and the depth of 30 m were installed at an interval of 5 m from the main well. Also, heat pump 50 RT, the thermal tank $40m^3$, and a remote control and monitoring system were installed in three single-span greenhouses ($2,100m^2$) for growing tomato in Buyeo, Chungcheongnam-do. According to the aquifer heat storage test which had been conducted from Aug. 31 to Sep. 22, 2016, warm water of $850m^3$ was found to flow into warm well. The temperature of the injected water was $30^{\circ}C$ (intake temperature : $15^{\circ}C$), and the heat of 12.8 Gcal was stored. The greenhouse heating test in winter had been conducted from Nov. 21, 2016 to Apr. 30, 2017. On Nov. 21, 2016 when heating greenhouse started, the aquifer temperature of the warm well was $18.5^{\circ}C$. The COP for heating with water source at $18.5^{\circ}C$ was 3.8. The intake water temperature of warm well was gradually lowered to the temperature of $15^{\circ}C$ on Jan. 2, 2017 and the heat pump COP was measured to be 3.2 at that time. As a result, the heat pump COP was improved by 18 %. and retrieval heat was 8 Gcal, the retrieval rate of heat stored in aquifer was estimated at 63 %.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.377-382
• /
• 2021

Background: Subclavian vein (SV) catheterization is a method for the delivery of fluids, drugs, and blood products, venous blood sampling, and central vein pressure monitoring in cardiac surgery. Catheter occlusion is a serious complication of SV catheterization during cardiac surgery, especially after sternal retractor expansion. Methods: In this observational study, 303 patients who had successful right infraclavicular SV catheterization from September 2019 to April 2020 were enrolled to determine the incidence of catheter occlusion. After catheterization, the lumens of all catheters were checked for the ability to infuse and withdraw blood from the catheter before and after sternal retractor expansion. The patients' characteristics, cannulation approach, on-pump or off-pump technique, occlusion of the catheter and its lumens, and any associated complications were recorded. The data were analyzed using IBM SPSS ver. 22.0 (IBM Corp., Armonk, NY, USA). Results: Of the 303 patients studied, 205 were male (67.7%) and 98 were female (32.3%). Catheter occlusion occurred in 11 patients with on-pump cardiopulmonary bypass (CPB) (227 patients) and 4 patients with off-pump CPB (76 patients) (p=0.863). The incidence of catheter occlusion was 4.95% (15 of 303 patients) with no cases of simultaneous 3-lumen occlusion in a catheter. The most commonly occluded lumen was the distal lumen (57.92%). Simultaneous 2-lumen occlusion occurred in 4 patients. Catheter occlusion was found in 3 of 13 malpositioned catheters (23.07%). Conclusion: The current study showed that malpositioning of the catheter tip was a risk factor for catheter occlusion and that the distal lumen of a triple-lumen catheter was the most commonly occluded lumen.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.6
• /
• pp.647-655
• /
• 2014

To perform long-term sewer monitoring, It is important to understand the nature of the wastewater flow that occurs at the point on early stage of the monitor and to prevent in advance a problem which may caused. We can infer the flow properties and external factors by analyzing the scatter graph obtained from the measured data flow rate monitoring data since an field external factor affecting the sewage flow is reflected in the flow rate monitoring data. In this study, Selecting the three points having various external factors, and we Inferred the sewer flow characteristics from depth-velocity scatter graph and determined the analysis equation for the dry-weather flow rate data. At the'point 1' expected non-pressure flow, we were able to see the drawdown effect caused by the free fall in the manhole section. At the'point 2', existed weir and sediments, there was backwater effect caused by them, and each of size calculated from the scatter graph analysis were 400 mm and 130 mm. At the'Point 3', there is specific flow pattern that is coming from flood wave propagation generated by the pump station at upstream. In common, adequate equations to explain the dry weather flow data are flume equation and modified manning equation(SS method), and the equations had compatibility for explaining the data because all of $R^2$ values are over 0.95.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.587-592
• /
• 2005

The ESS(Energy Saving System) is designed to have functions of controlling. monitoring for cooling system. etc. ESS consists of the I/O module, CPU module and Display module I/O module detects various ESS data on local area and treats signals via I/O interface system. The interface system receives various status data and outputs control signals. ESS is tested with dummy signal to verify proposed functions and is shown good results. For future study ESS will be tested under real condition in the ship.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.591-594
• /
• 2005

Geothermal energy becomes to be one of the promising energy sources. In this study, technology using water thermal energy from riverbank filtration system(including alluvial and riverbed deposit) is reviewed and checked as an energy resources. The objects of this study are (1) long-term monitoring of alluvial and riverbed sites, (2) preliminary design of cooling and heating system at riverbank filtration facility, and (3) calculation of potential groundwater heat energy, including riverbank filtration system. Measuring data of alluvial and riverbank filtration show slight fluctuations comparing to temperature of atmospheric air which indicates that groundwater obtained from the riverbank filtration system have a sufficient potential as a source of cooling and heating energy.

• The Korean Journal of Pain
• /
• v.31 no.1
• /
• pp.3-9
• /
• 2018

Long QT syndrome is a cardiac repolarization disorder and is associated with an increased risk of torsades de pointes. The acquired form is most often attributable to administration of specific medications and/or electrolyte imbalance. This review provides insights into the risk for QT prolongation associated with drugs frequently used in the treatment of chronic pain. In the field of pain medicine all the major drug classes (i.e. NSAIDs, opioids, anticonvulsive and antidepressant drugs, cannabinoids, muscle relaxants) contain agents that increase the risk of QT prolongation. Other substances, not used in the treatment of pain, such as proton pump inhibitors, antiemetics, and diuretics are also associated with long QT syndrome. When the possible benefits of therapy outweigh the associated risks, slow dose titration and electrocardiography monitoring are recommended.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.253-259
• /
• 2006

There is few study which automatically diagnoses the fault from ship's monitored data. The bigger control and monitoring system is. the more important fault diagnosis and maintenance is to reduce damage caused by system fault. This paper proposes fault diagnosis system using a correlation analysis algorithm which is able to diagnose and forecast the fault from monitored data and is composed of fault detection knowledge base and fault diagnosis knowledge base. For all kinds of ship's engine room monitored data are classified with combustion subsystem, heat exchange subsystem and electric motor and pump subsystem, To verify capability of fault detection, diagnosis and prediction, FMS(Fault Management System) is developed by C++. Simulation by FMS is carried out with population data set made by the log book data of 2 months duration from a large full container ship of H shipping company.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.269-276
• /
• 2004

A marine diesel engine should realize optimal efficiency operation while reducing NOx. Fuel injection systems by electronic control can become effective means for that. Although it would be able to get more precise engine control compared to the mechanical injection system, it needs some accurate and instant information in order to bring its ability into full play while sailing on the sea. Very important information of them is shaft torque and continuous combustion pressure of all cylinders. The system presented in this report can deliver those data.