• 한국수산과학회지
• /
• 제28권3호
• /
• pp.294-300
• /
• 1995

In aquaculture industrial field, an automatic management and control system is needed to cope with the difficulties such as expensive wage, ripe age of management worker and risk according to the unexpected change of environmental conditions in the aquarium. This paper introduces an automatic aquarium monitoring and control system. The system is developed using PC single board computer. A PC can be connected to multi-single hoard computers, and the communication between PC and single board computers is based on RS-422/485 interfacing method. The physical data of pH, DO, temperature and water level etc. are real-timely treated in the single board computer though individual transducers, transfered to the main monitoring PC through RS-422/485 communication, and those data are graphically shown on the PC monitor. Furthermore, the environmental circumstance can be monitored through the image processing system, and the emergency system can be operated under the condition of environmental incident such as electric power stoppage, DO deficiency, pump shut down and low level water etc.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1169-1175
• /
• 2019

The minimum detectable activity (MDA) value was derived according to the flow rate of the sample and degree of amplification of the device by sending the sample directly from the collection site to the detection part through a pump. This method can lead to reduction in time and cost compared to the existing measurement method that uses a pre-treatment process. In this study, experiments were conducted on $^3H$ and $^{90}Sr$, which are the major pure beta-emitting radionuclides, by setting the sample flow rate and the amplification gain as factors. The MDA values were derived according to the flow rates, considering that the flow rate can affect the MDA values. There were no change in the MDA under different flow rates of 0, 600, 800, and 1000 mL/min. Therefore, it was confirmed that the flow rate may not be considered when collecting samples for monitoring in actual field. As the degree of amplification of the amplifier increased, the time required to reach the target MDA decreased. When the amplification was quadrupled, the detection efficiency increased by approximately 23.4 times, and the time to reach the MDA decreased to approximately 1/550 times. This method offers the advantage of real-time on-site monitoring.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권6호
• /
• pp.23-32
• /
• 2012

This study was conducted to monitor microbial species dynamics within the aquifer due to long term operation of geothermal heat pump system. The species were identified by molecular biological methods of 16S rDNA. Groundwater sample was collected from both open (S region) and closed geothermal recovery system (J region) along with the control. J measured and control as well as S measured found Ralstonia pickettii as dominant species at year 2010. In contrast, Rhodoferax ferrireducens was dominantly observed for the control of S. In 2011, Sediminibacterium sp. was universely identified as the dominant species regardless of the monitoring places and type of sample, i.e., measured or control. The difference in the dynamics between the measured and the control was not critically observed, but annual variation was more strikingly found. It reveals that possible environmental changes (e.g. ORP and DO) due to the operation of geothermal heat recovery system in aquifer could be more exceedingly preceded to differentiate annual variation of microbial species rather than positional differences.

• 한국측량학회지
• /
• 제29권6호
• /
• pp.613-620
• /
• 2011

해상 준설성과의 과학적 평가를 위해서는 준설선의 유도 위치, 준설수심 및 준설 토사량 등의 준설공정을 실시간으로 모니터링하면서 작업공정을 관리하고 평가할 수 있는 시스템의 구축이 필요하다. 본 연구에서는 기상조건과 거리에 상관없이 상시측량이 가능한 GPS 측량방법을 응용하는 정밀위치측량과 항행의 두가지 기법에 수심측정기법 등을 병용하는 해상측량시스템을 개발하고자 하였다. Beacon DGPS를 기반으로 하는 선박위치측정, GPS/Gyro 통합장비에 의한 선박방향 측정, 준설심도와 붐대위치 측정, 조위에 따른 준설심도 보정 등의 기능을 갖춘 해상준설선의 유도 및 위치관리시스템을 구축하고 준설선의 작업 현황을 실시간으로 모니터링하면서 정확히 작업을 유도할 수 있는 운용프로그램을 개발하였다. 본 연구에서 개발된 시스템은 해상준설 또는 해상건설산업에서 원가 절감에 크게 기여할 수 있을 것으로 기대된다.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.165-175
• /
• 2011

본 논문에서는 건식 진공펌프에서 측정한 다중 변수로 구성된 배치데이터의 통계적인 특성을 소개한다. 흡입구 및 배출구 압력과 부스터/드라이 펌프의 소비전류와 같은 상태변수의 변위분포는 2개나 3개의 특정적인 구간으로 나뉘는 특성이 있다. 이런 관측을 통해 발견한 통계학적 특성을 나타내기 위해 적응형 인자 모델(APM)을 사용하였다. APM 모델기반의 배치 데이터는 건식 진공펌프의 상태를 진단하는데 적절함을 증명하였고, 이전의 동적 시간 왜곡 알고리즘과 비교하였을 때 계산시간 및 필요 메모리 면에서 효율적임을 확인하였다.

• 한국지반신소재학회논문집
• /
• 제15권1호
• /
• pp.71-81
• /
• 2016

준설토 이송 시 윤활층에 전자기장을 인가하여 이송 동력을 절감하고, 송토량을 증가시키는 연구의 일환으로, 이런 전자기장 장치의 실제 적용성을 검증하고자 실현장 8.5km의 이송거리의 준설현장에 전자기장 장치를 설치하여 그 효과를 검증하였다. 이송 유속에 관계되는 운전 조건 및 토질상태와 유동상태를 모니터링하고, 획득한 데이터를 송토량과 동력 사이의 관계로 정리하여 전자기장 인가 후 약 30%의 동력대비 이송량 증가가 있음을 확인하였고, 이를 통해 전자기장 인가가 준설토 이송 시 동력절감에 효과가 있음을 확인하였다.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.173-182
• /
• 2005

The Performance of U-tube ground heat exchanger for geothermal heat Pump systems depends on the thermal properties of the soil, as well as grout or backfill materials in the borehole. In-situ tests provide a means of estimating some of these properties. In this study, in-situ thermal response tests were completed on two vertical boreholes, 130 m deep with 62 mm diameter high density polyethylene U-tubes. The tests were conducted by adding a monitored amount of heat to water over a $17\~18$ hour period for each vertical boreholes. By monitoring the water temperatures entering and exiting the loop and heat load, overall thermal conductivity values of grout/soil formation were determined. Two parameter estimation models for evaluation of thermal response test data were compared when applied on the same temperature response data. One model is based on line-source theory and the other is a numerical one-dimensional finite difference model. The average thermal conductivity deviation between measured data and these models is of the magnitude $1\%$ to $5\%$.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1149-1154
• /
• 2017

In this paper, we propose a sensorless multi-function controller applicable for deep well water pumps using current detection method. The proposed system overcomes various drawbacks of existing sensored system and additional features like Over current protection function due to overload, Under current protection function for idling at low water level and Relay function for starting single phase motors and acts as a level indicator to detect water lever in real time by the current detection method. A prototype of the multi-function controller system is designed and all of its functions are tested in the laboratory. The application of the proposed controller ensures reduction in the power consumption and maintenance cost in the facilities like water and septic tanks, drainage and waste water system, oil and chemical tanks where deep well pumps are used.

• 한국IT서비스학회지
• /
• 제20권3호
• /
• pp.1-12
• /
• 2021

Reactor Coolant Pump (RCP) is core part of nuclear power plant to provide the forced circulation of reactor coolant for the removal of core heat. Properly monitoring vibration of RCP is a key activity of a successful predictive maintenance and can lead to a decrease in failure, optimization of machine performance, and a reduction of repair and maintenance costs. Here, we developed real-time RCP Vibration Analysis System (VAS) that web based platform using NoSQL DB (Mongo DB) to handle vibration data of RCP. In this paper, we explain how to implement digital signal process of vibration data from time domain to frequency domain using Fast Fourier transform and how to design NoSQL DB structure, how to implement web service using Java spring framework, JavaScript, High-Chart. We have implement various plot according to standard of the American Society of Mechanical Engineers (ASME) and it can show on web browser based on HTML 5. This data analysis platform shows a upgraded method to real-time analyze vibration data and easily uses without specialist. Furthermore to get better precision we have plan apply to additional machine learning technology.

• Mass Spectrometry Letters
• /
• 제7권2호
• /
• pp.50-54
• /
• 2016

Multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) is currently used in our laboratory for isotopic and quantitative analyses of nuclear materials at ultra-trace levels in environmental swipe samples, which is a very useful for monitoring undeclared nuclear activities. In this study, to improve measurement precisions of uranium isotopes at ultratrace levels, we adopted a desolvating nebulizer system (Aridus-II, CETAC., USA), which can improve signal sensitivity and reduce formation of uranium hydride. A peristaltic pump was combined with Aridus-II in the sample introduction system of MC-ICP-MS to reduce long-term signal fluctuations by maintaining a constant flow rate of the sample solution. The signal sensitivity in the presence of Aridus-II was improved more than 10-fold and the formation ratio of UH/U decreased by 16- to 17- fold compared to a normal spray chamber. Long-term signal fluctuations were significantly reduced by using the peristaltic pump. Detailed optimizations and evaluations with uranium standards are also discussed in this paper.