• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.217-219
• /
• 2012

This study describes 3D RANS simulation of a 2.1 MW swirling pulverized coal flame in a semi-industrial scale furnace. The simulation of pulverized coal combustion involves various models for complex physical processes and needs information of pyrolysis rate, the yields and compositions of volatiles and char especially in coal conversion. The coal conversion information can be acquired by the experiment or the pre-processor code. The empirical model based on the experiment of the IFRF and the structural model based on the pre-processor code of the PC-COAL-LAB were evaluated against the measurement data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3163-3168
• /
• 2008

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) system was developed for iron making. Combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational are numerically predicted to recognize the performance with the locations of nozzles in a blast furnace. A variety of parameters including the pulverized coal quantities, oxygen amounts, inlet temperature of the tuyeres and mass flow rate of coal carrier gas are taken into consideration. Also In order to develop more efficient than existing coal injection system, this study applies a flame measurement system using a charge couple device (CCD) camera and frame grabber. And it has used algorithms of auto sampling from flame shape information and composed the device for location control of PCI. This study find to further improve the blast furnace performance by the control of PCI locations.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.8-14
• /
• 2014

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) was developed for iron making. The combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational conditions are numerically predicted to determine the performance levels with regard to different locations of the nozzles in a blast furnace. A variety of parameters, including the pulverized coal quantities, oxygen amounts, inlet temperatures of the tuyeres, and the mass flow rate of coal carrier gas are taken into consideration. Also, in order to develop greater efficiency than those of existing coal injection systems, this study applies a flame measurement system using a charge-coupled device (CCD) camera and a frame grabber. It uses auto sampling algorithms from the flame shape information to determine the device for the optimal location control for PCI. This study finds further improvements of the blast furnace performance via the control of the PCI locations.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권6호
• /
• pp.475-482
• /
• 1999

The electrostatic precipitation characteristics of two kinds of fly ashes, one derived from a fluidized bed combustor(FBC), the other from a pulverized coal(PC) fired furnace, have been studied on a pilot plant. Experiments have been carried out to enhance the collection efficiency while changing the operating conditions for two kinds of coal ashes, respectively. It has been shown that collection efficiency is affected by many factors such as shape of the ashes, dust contents, humidity, and temperature, etc. Experimantal results showed that collection efficiency of the FBC ashes was higher than that of the PC fly ash in spite of the small size of the FBC ashes. The experimetal results have been applied to the collection efficiency equations to show that the modified Deutsch equation was well agreed with experiment results if modification parameter k was set to 0.6 for the fluidized bed fly ashes and to 0.43 for the pulverized coal fly ashes.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.43-46
• /
• 2012

The oxygen concentration of primary oxidizer is decided under 10% due to flammable risk. It can be a spontaneous combustion inside burner or tube if the excess oxygen is added to primary oxidizer in Oxy-PC burner. In this case, the rest oxygen which can not be injected to primary oxidizer should be injected to another port. If added it to a second oxidizer, the ignition is unstable at outlet of burner. Accordingly an extra lancing port is needed to insert into the burner unlike other common air mode. And the flame formation and combustion characteristic differ from lancing port position. Therefore we observed flame formation which has stable combustion characteristic according to the shape and position of lancing port.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.587-597
• /
• 2010

공기다단연소는 석탄화력발전에서 NOx을 저감하기 위한 기술 중에 하나로 잘 알려져 있다. 본 연구에서는 미분탄 보일러에 공기다단연소를 적용하여 현 수준을 유지하면서도 NOx 저감을 이룰 수 있는 최적의 운전조건을 제안하고자 한다. 공기다단연소를 적용하기 위해 미분단 보일러에 설치된 CCOFA와 SOFA를 통해 공급공기비율을 16.7/83.3%, 25/75%, 50/50%, 75/35% 그리고 83.3/16.7%로 서로 다르게 공급하여 연소 및 배출물질 특성을 연구하였으며, 또한 공기다단연소기술의 적용에 의한 냉각 영향와 재연소반응 영향를 확인하기 위해 동일한 조건에서 공기와 질소를 각각 공급하여 NOx 저감영향을 확인하였다. 본 연구결과를 통해서 CCOFA와 SOFA에 동일한 양을 공급한 공기다단연소조건에서 NOx의 최대저감효과를 확인하였고, 최적의 운전조건을 도출하였다.

• 대한기계학회논문집B
• /
• 제35권5호
• /
• pp.451-457
• /
• 2011

본 연구의 주 목적은 연료 수분 미소 정량 공급기를 장착한 층류 반응기(LFR)에서 수분함량 변화에 따른 석탄의 휘발분 점화 특성을 조사하는 것이다. 실제 발전소의 미분기 출구 분위기와 비슷한 수분량이 석탄량의 20, 30, 40%로 LFR에 석탄과 함께 공급했을 때 휘발분의 점화 위치와 시간을 실험적으로 관찰하였다. 석탄이 공급되는 층류 반응기 정 중앙의 수직방향으로 $70{\mu}m$ R-type 열전대를 이용하여 복사 열손실을 고려한 가스온도를 측정하였고, 휘발분 점화 위치는 CCD 카메라를 이용해 촬영한 15~20개의 이미지를 디지털 이미지 프로세싱을 통해 얻은 평균 값으로 결정하였다. 그 결과 수분량이 증가할수록 가스 온도는 감소하였고, 점화 위치는 2.92, 3.36, 3.96, 4.65mm로 지수적으로 증가하였다. 이러한 실험결과는 이론적으로 adiabatic thermal explosion에서의 점화 지연 시간과 같은 경향을 나타내었다.