• 제목/요약/키워드: Pulse-on duration

검색결과 332건 처리시간 0.029초

수중 데이터 통신 시스템의 개발에 관한 연구 (I) -에코 신호 전송 시스템- (development of Underwater Data Communication System (I) -Echo Signal Transfer System-)

  • 신현옥
    • 수산해양기술연구
    • /
    • 제35권3호
    • /
    • pp.284-290
    • /
    • 1999
  • This paper describes a Frequency Shift Keying (FSK) modulator and demodulator and the experimented underwater data ommunication equipment to transfer the analog echo signal in real-time from an underwater vehicle to the mother ship. The system consists of an echo signal transfer unit equipped to the vehicle and an ultrasonic receiver equipped on the ship. The former includes an ultrasonic transceiver unit of 180kHz for echo detection and a continuous wave transmitter of 50kHz with a FSK modulator for echo transmission to the ship. The latter includes an ultrasonic receiver of 50kHz and the FSK demodulator. The results of experiment are as follows. 1. The characteristics of the FSK modulating and demodulating circuits designed with the use of C-MOS IC 4046 was good and confirmed its usefulness in underwater data communication system.2. The prototype ultrasonic transceiver unit shows profitable driving power while the pulse duration was short less than 3 msec, but it was found that the driving power is not sufficient while the long pulse duration or continuous wave is used. The gain of the ultrasonic receiver was 80 dB and the receiving bandwidth 700Hz (at - 3 dB point).3. It was found that the system designed by the author has some possibility to use in underwater echo transfer.4. At the FSK modulator, the widths of voltage and frequency which represent linearity were 3.5 V, 1600Hz, respectively, at the FSK demodulator 2.6 V, 700Hz, respectively.

  • PDF

수중 데이터 통신 시스템의 개발에 관한 연구 (I) -에코 신호 전송 시스템- (development of Underwater Data Communication System (I) -Echo Signal Transfer System-)

  • 신현옥
    • 수산해양기술연구
    • /
    • 제35권3호
    • /
    • pp.285-285
    • /
    • 1999
  • This paper describes a Frequency Shift Keying (FSK) modulator and demodulator and the experimented underwater data ommunication equipment to transfer the analog echo signal in real-time from an underwater vehicle to the mother ship. The system consists of an echo signal transfer unit equipped to the vehicle and an ultrasonic receiver equipped on the ship. The former includes an ultrasonic transceiver unit of 180kHz for echo detection and a continuous wave transmitter of 50kHz with a FSK modulator for echo transmission to the ship. The latter includes an ultrasonic receiver of 50kHz and the FSK demodulator. The results of experiment are as follows. 1. The characteristics of the FSK modulating and demodulating circuits designed with the use of C-MOS IC 4046 was good and confirmed its usefulness in underwater data communication system.2. The prototype ultrasonic transceiver unit shows profitable driving power while the pulse duration was short less than 3 msec, but it was found that the driving power is not sufficient while the long pulse duration or continuous wave is used. The gain of the ultrasonic receiver was 80 dB and the receiving bandwidth 700Hz (at - 3 dB point).3. It was found that the system designed by the author has some possibility to use in underwater echo transfer.4. At the FSK modulator, the widths of voltage and frequency which represent linearity were 3.5 V, 1600Hz, respectively, at the FSK demodulator 2.6 V, 700Hz, respectively.

이차전지 소재용 구리의 파이버 레이저 용접 특성에 관한 연구 (Study on Fiber Laser Welding Characteristics of Copper for Secondary Battery Material)

  • 박은경;이가람;이현중;유영태
    • 한국레이저가공학회지
    • /
    • 제17권3호
    • /
    • pp.1-9
    • /
    • 2014
  • In this study, we analyzed fiber laser welding for the pure copper thin plates in a series of secondary lithium-ion batteries; and performed the experiment for the purpose of the preceding study to replace bolt joints method the with the laser welding method. We have changed the peak power of the laser from 5 to 6kW, the pulse duration by 4, 6, 8, and 10ms, the frequency by 10, 12, 16, and 25Hz, and the focal position by -3, 0, and +3. As a result, when the focal position is at +3, the peak power is 5kW, and the pulse duration and the Frequency are 4ms and 25Hz, respectively, we obtain 2.1 and 2.5 times better tensional strengths, respectively, than the highest values of tensional strengths obtained with the focal positions at 0 and -3.

  • PDF

기능적 전기 자극에 대한 고찰 (A Study on the Functional Electrical Stimulation)

  • 임종수;김순희;송영화
    • 대한물리치료과학회지
    • /
    • 제6권4호
    • /
    • pp.187-199
    • /
    • 1999
  • Functional Electrical Stimulation (FES) is used for muscle reeducation, reduction of spasticity, delay of atrophy, and muscle strengthening. FES stronger stimulation than other forms of electrical stimulation. The efficacy of FES in improving function has been substantiated in the literature. Treatment programs employing FES - activation of muscular tissue through the intact peripheral nervous system - can be broken into five major categories, according to the goal of treatment. These broad areas would include the use of FES to: (1) a direct excitation onto the alpha motoneuron, through peripheral stimulation of the Ia myotatic sensory system and ascending afferent information, which will be integrated at conscious and subconscious level of the CNS. (2) The quality of a stimulated muscle contraction is determined by combination of many parameters, including stimulus amplitude, pulse duration, stimulus frequency, and duty cycle. (3) A unit that has a pulse duration between 200 and $400{\mu}sec$ will be more than adequate for FES applications. (4) The neuromuscular plasticity is critically important to return of function using muscle re-education and facilitation applications. (5) Prior to using FES as an electrical orthosis, the patient should build up endurance in the muscles to be stimu1ated during the gait cycle.

  • PDF

기체연료주입계의 긴 원형도관에서 기체 흐름의 유형 (Gas flow pattern through a long round tube of a gas fueling system (I))

  • 인상렬
    • 한국진공학회지
    • /
    • 제15권5호
    • /
    • pp.465-474
    • /
    • 2006
  • 기체저장용기, 단순 개폐밸브 및 기체 공급 관으로 구성된 기체연료 주입계는 가장 간단하게 사전에 기체 도입유형을 정할 수 있다는 장점이 있다. 장치의 동작특성을 알아보기 위해 기체 흐름에 관한 일차원 동특성 방정식을 세우고 수치적으로 풀었다. 이 계산의 목적은 저장기체 압력, 저장용기 체적, 공급관의 굵기, 길이 따위의 기계적 요소들과 최대유량까지의 지연시간, 최대유량 값, 기체 펄스폭 따위의 기체 흐름의 유형을 결정하는 인자들 사이의 관계를 정립하려는 것이다.

고효율 태양전지모듈의 성능측정 방법 (Performance Measurement Method of Several Types of Photovoltaic Module Depending on Efficiency)

  • 김경수;강기환;유권종;윤순길
    • 한국태양에너지학회 논문집
    • /
    • 제31권1호
    • /
    • pp.93-99
    • /
    • 2011
  • To guarantee more exact maximum power of solar cell module, it is absolutely required to have performance characteristics of various solar cells. Today, there are many types of solar simulator for large area measurement. But it is very opaque how to select the best one for various solar cell module like crystalline silicon solar cell, high efficiency solar cell, amorphous silicon thin film solar cell, CdTe and CIGS solar cell module. So, in this paper 4 types of photovoltaic module were selected to compare the electrical characteristics by changing light pulse duration time and voltage scan direction. Light pulse duration time was varied from 10msec to 800msec. And two types of voltage scan directions, Voc->Isc and Isc->Voc were selected. From this results, optimum measuring condition was suggested and electrical variation was analysed for each types of solar cell module. The detail description is specified as the following paper.

$Cr^{4+}$:YAG 포화 흡수체를 이용한 레이저 다이오드 뒷면 여기 Nd:YAG 레이저의 들뜸 효율 및 Q-switching 특성 연구 (Measurement of excitation efficiency and passively Q-switched characteristics of laser diode end-pumped Nd:YAG laser by using $Cr^{4+}$:YAG as a saturable absorber)

  • 정태문;김광석;문희종;이종훈;김철중;이종민
    • 한국광학회지
    • /
    • 제9권4호
    • /
    • pp.231-235
    • /
    • 1998
  • 레이저 다이오드 뒷면 여기 방식을 이용한 Nd: YAG 레이저를 제작하고, 뒷면 여기 방식을 이용하였을 때, 들뜸 효율을 측정하였다. 포화 흡수체로 $Cr^{4+}$:YAG를 레이저 공진기 내부에 설치하여 수동형 Q-switching을 수행하였고, 그 때, 평균 출력, 펄스폭 및 반복율 특성등을 조사하였다. 수동형 Q-switching된 레이저의 펄스폭 및 반복율은 평균 출력 및 $Cr^{4+}$:YAG 결정의 낮은 강도 투과율(low intensity trasmission)에 따라 변화하였으며, 평균 출력은 최고 1 W, 펄스폭은 최저 51 nsec 까지 얻을 수 있었고 최고 약 40kHz의 고반복율로 동작하는 것을 관찰하였다.

  • PDF

정상 망막과 변성 망막을 위한 전기자극 파라미터 (Electrical Stimulation Parameters in Normal and Degenerate Rabbit Retina)

  • 진계환;구용숙
    • 한국의학물리학회지:의학물리
    • /
    • 제19권1호
    • /
    • pp.73-79
    • /
    • 2008
  • 망막색소변성(retinitis pigmentosa: RP)과 연령 관련 황반변성(age-related Macular Degeneration: AMD)은 망막변성으로 인해 실명에 이르는 대표적인 질환이며 망막이식장치의 개발을 통해 치료될 수 있다고 간주되고 있다. 최근에 국내에서도 망막이식장치 개발을 위한 연구팀이 조직되었다. 성공적인 망막이식장치 개발을 위하여 여러 가지 선결요소가 필요하지만 그 중 한 가지가 이식장치에 인가할 전기자극을 최적화하는 것이다. 변성망막의 전기적 특성은 정상 망막과 다르리라 예측되므로 우리는 장차 개발될 망막 이식장치에 인가할 전기자극 최적화를 위한 가이드라인을 제공하기 위해 정상 망막과 변성 망막의 전압자극 파라미터에 관한 실험을 하였다 망막을 분리한 후 망막절편을 신경절세포 층이 다채널전극의 표면을 향하게 하여 전극에 붙인다 in-vitro 상태에서 망막 신경절세포의 전기신호를 기록하기 위해 전극 직경: $30{\mu}m$, 전극간 거리: $200{\mu}s$, 전극 임피던스 1kHz 에서 $50k{\Omega}$인 8행 8열의 다채널전극을 사용하였다. 다채널전극의 60채널 중 두 채널을 자극전극과 접지로 사용하여 단극전기자극을 인가하였고 나머지 전극을 기록전극으로 사용하였다. 가한 전기자극은 전압자극으로 전하균형을 맞춘 이상성자극을 아노딕 사각파를 먼저 주고 캐쏘딕 사각파가 나중에 나오는 형태로 두 사각파간의 지체는 없도록 하였으며 동일한 자극을 2초 간격으로 50회 반복하여 인가하였다. 다양한 전기자극을 사용하였는 바 첫째는 사각파의 크기를 달리하였다 $(0.5{\sim}3V)$. 둘째는 사각파의 시간을 달리하였다 $(100{\sim}1,200{\mu}s)$. 전하밀도는 옴의 법칙과 쿨롱의 법칙을 이용하여 계산하였다. 전기자극으로 유발된 반응은 50회 자극에 대한 평균치를 얻은 후 자극 후 히스토그램(PSTH)을 그려 분석하였다. 전압자극의 크기를 $0.5{\mu}3V$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극은 1.5V이었고 이때 계산된 전하밀도의 역치는 $2.123mC/cm^2$이었다. 전압의 크기를 2V로 고정하고 자극 지속시간을 $100{\sim}1,200{\mu}s$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극의 역치는 $300{\mu}s$에서 관찰되었다. 이때 계산된 전하밀도의 역치는 $1.698mC/cm^2$이었다. L-(1)-2-amino-4-phosphonobutyric acid (APB)을 사용하여 ON-경로를 차단한 후에 전기자극을 인가하였을 때도 자극에 의해 망막신경절 세포의 반응이 유발되는 것을 확인하였다. APB-변성망막에서 전압의 크기를 2V로 고정하고 자극 지속시간을 $100{\sim}1,200{\mu}s$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극의 역치는 $300{\mu}s$에서 관찰되었으며 이는 정상망막의 결과와 같았다. 추후 APB-변성망막을 가지고 좀더 실험이 진행되어야 정상망막과 변성망막의 전하밀도에 관한 명료한 비교가 가능할 것이다.

  • PDF

한국 성인의 수면시간과 맥압과의 관련성: 국민건강영양조사 제7기 자료를 중심으로 (Relationship between sleep duration and pulse pressure in Korean adults: Focusing on the data of the 7th National Health and Nutrition Survey)

  • 정은영
    • 디지털융복합연구
    • /
    • 제20권4호
    • /
    • pp.411-418
    • /
    • 2022
  • 본 연구는 한국 성인의 수면시간과 맥압과의 관련성을 알아보고자 하며, 연구방법은 국민건강 영양조사 제7기(2016-2018) 자료를 이용하였다. 대상자는 20세 이상 5,707명을 대상으로 빈도와 백분율 연속형 자료는 평균과 표준편차, 교차분석과 independent t-test, 고 맥압에 대한 단계적인 로지스틱 회귀분석을 실시하였으며, SPSS WIN 18.0 version 통계프로그램을 이용하였다. 연구결과 전체 인구(OR=1.344, 95% CI=1.002-1.803)와 여성(OR=1.624, 95% CI=1.112-2.371)에서는 수면시간이 6시간 이하에 비하여 9시간 이상에서 고 맥압의 유병률이 높았지만, 남성(OR=1.012, 95% CI=0.631-1.550)에서는 그 유의성이 없었다. 따라서 적절하지 않은 수면시간이 건강에 미치는 영향을 고려할 때 이에 대한 보건학적인 교육과 관리가 필요할 것으로 생각하며 추후 수면시간과 맥압의 관계에 관해서는 계속된 연구가 필요할 것이다.

A Multi-megawatt Long Pulse Ion Source of Neutral Beam Injector for the KSTAR

  • Chang, Doo-Hee;Seo, Chang-Seog;Jeong, Seung-Ho;Oh, Byung-Hoon;Lee, Kwang-Won;Kim, Jin-Choon
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 2004년도 추계학술발표회 발표논문집
    • /
    • pp.719-720
    • /
    • 2004
  • A multi-megawatt long pulse ion source (LPIS) of neutral beam injector was developed for the KSTAR. Beam extraction experiments of the LPIS were carried out at the neutral beam test stand (NBTS). Design requirements for the ion source were 120 kV/65 A deuterium beam and a 300 s pulse length. A maximum ion density of $9.1310^{11}$ $cm^{-3}$ was measured by using electric probes, and an optimum arc efficiency of 0.46 A/kW was estimated with ion saturation current of the probes, arc power, and total beam area. An arcing problem, caused by the structural defect of decelerating grid supporter, in the third gap was solved by the blocking of backstream ion particles, originated from the plasma in the neutralizer duct, through the unnecessary spaces on the side of grid supporter. A maximum drain power of 1.5 MW (i.e. 70 kV/21 A) with hydrogen was measured for a pulse duration of 0.5 s. Optimum beam perveance was ranged from 0.75 to 0.85. An improved design of accelerator for the effective control of beam particle trajectory should provide higher beam perveance.

  • PDF