• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.510-519
• /
• 2013

Urea-SCR시스템에 적용하기 위한 액막형 선회분사기의 분사압력변화에 따른 분무특성이 실험적으로 조사되었다. 실험에 사용된 노즐은 형상비 3.1을 갖는 단공 압력식 액막형 선회노즐이며, 노즐선단에 분사되는 유체에 선회류를 형성하기 위한 선회기가 설치되어 있다. 노즐의 분사량 조절은 PWM(pulse width modulation)기법에 의해 제어되었다. 분무의 발달과정은 2차원 PIV에 의해 가시화되었으며, 분무각 변화가 조사되었다. 분무액적의 속도 및 크기는 2차원 PDPA에 의해 상온 대기압 조건에서 측정되었다. 분무구조는 분사압력에 큰 영향을 받으며, SMD는 분사압력 증가에 따라 감소하며 선행연구자의 반실험적 결과와 유사한 경향을 보임을 알 수 있었다.

• 한국분무공학회지
• /
• 제25권4호
• /
• pp.188-195
• /
• 2020

To meet stringent emission regulations of automotive engines, fuel injection control techniques have advanced based on reliable and fast computing prediction models. This study aims to develop a reliable lightweight prediction model of fuel injection rates using a small number of input parameters and based on simple fluid dynamic theories. The prediction model uses the geometry of the injector nozzle, needle motion data, injection conditions and the fuel properties. A commercial diesel injector and US No. 2 diesel were used as the test injector and fuel, respectively. The needle motion data were measured using X-ray phase-contrast imaging technique under various fuel injection pressures and injection pulse durations. The actual injector rate profiles were measured using an injection rate meter for the validation of the model prediction results. In the case of long injection durations with the steady-state operation, the model prediction results showed over 99 % consistency with the measurement results. However, in the case of short injection cases with the transient operation, the prediction model overestimated the injection rate that needs to be further improved.

• 한국지반환경공학회 논문집
• /
• 제7권4호
• /
• pp.63-71
• /
• 2006

본 연구에서는 공기주입 방식과 공기주입 시간이 매립지가스 안정화에 미치는 영향을 평가하고 매립지굴착사업 진행시 굴착작업 시간을 판단하고자 실시하였다. 간헐주입의 경우 혐기성에서 호기성으로의 전환되는데 연속주입보다 8배 정도 긴 시간이 소요되어 매립지굴착사업과 같이 혐기성 가스를 빠른 시간 내에 호기성 가스로 치환하여 굴착작업을 수행해야 하는 경우에는 연속주입이 더 적합할 것으로 판단되었다. $0.2m^3/min$ 유량으로 공기를 연속주입한 후 중단하였을 때 공기주입 시간과 호기성 조건($CH_4$ < 5%)이 유지되는 시간과는 비교적 높은 상관도($r^2$ = 0.95)를 나타내고 있었다. 공기주입 시간을 1이라고 볼 때 공기주입 중단 후 호기성은 약 1.5배 정도의 긴 기간 동안 유지되고 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.367-370
• /
• 2006

This paper deals with the modeling and simulation of the internal flowfield in a valveless airbreathing pulse detonation engine (PDE) currently under experimental development at the U.S. Naval Postgraduate School. The system involves no valves in the airflow path, and the isolation between the inlet and combustor is achieved through the gasdynamics in an isolator. The analysis accommodates the full conservation equations in axisymmetric coordinates, and takes into account variable properties for ethylene/oxygen/air system. Chemical reaction schemes with a single progress variable are implemented to minimize the computational burden. Detailed flow evolution during a full cycle is explored and propulsive performance is calculated. Effect of initiator mass injection rate is examined and results indicate that the mass injection rate should be carefully selected to avoid the formation of recirculation zones in the initial cold flowfield. Flow evolution results demonstrate a successful detonation transmission from the initiator to the combustor. However, strong pressure disturbance may propagate upstream to the inlet nozzle, suggesting the current configuration could be further refined to provide more efficient isolation between the inlet and combustor.

• 한국광학회지
• /
• 제11권4호
• /
• pp.265-270
• /
• 2000

이득 스위칭 $1.55\mu\textrm{m}$ UFB 반도체 레이저에서 외부 주입광의 전력과 파장이 시간 지터와 펄스 폭에 미치는 영향을 전송선로 레이저 모델에 기초한 모의 실험을 통하여 분석하였다. 주입 광 전력이 증가함에 따라 시간지터는 감소하고 펄스폭은 증가했으며, 최소 시간 지터는 주입 광의 파장이 첩된 스펙트럼의 중시과 일치할 때에 나타났다. 이에 따라, 외부 광 주입에 의해 펄스 폭의 증가 없이도 시간 지터를 대략 1/2.7배로 감소시킬 수 있었다. 모의 실험 결과는 본 실험결과와는 물론이고 이미 발표된 실험결과와 비교적 잘 일치함을 확인하였으며, 이는 본 모델이 반도체 레이저에 기초한 시스템 분석에 유용함을 입증한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.515-518
• /
• 2005

A concrete is easy to happen crack. So it requires crack-repair work to solve quality deteriorations of a building because of cracks. When crack is filled with crack-repair materials, it is difficult to find out how depth it was injected. So in this study we evaluated the injection depth with using indirect and oblique methods, ultrasonic pulse measurement method of NDT. The results of this study showed that both methods are possible to evalute penetration depth of crack-repair materials and indirect methods is thought to be more useful one than obliqure one.

• 대한전기학회논문지
• /
• 제39권3호
• /
• pp.254-262
• /
• 1990

In the active power filter, the PWM method for controlling the power converter plays an important role for the performance and the efficiency of the filter. In this paper, a new PWM method for the single phase current source type active power filter is presented, which is intended particularly for obtaining the maximum efficiency of the compensation. This method is basically based upon the optimized injection method, but in contrast to the existing method, this method adapts the optimized injection method by putting not only the pulse width, but also the pulse position into control variables. By doing this, when the number of pulses per one cycle is N, lower order harmonics up to the Nth order can be completely eliminated by the filter. So, this method is much more efficient than any other existing method. These characteristics are well verified by the computer simulations and the experiments.

• 한국광학회지
• /
• 제11권3호
• /
• pp.166-170
• /
• 2000

고리형 광섬유 공전기 안에 반도체 광 증폭기를 삽입하여 1530 nm에서 1570까지 파장을 가변할수 있는 전광 동기 신호 재생 방식을 제안하고 구현하였다. 임의 파형을 갖는 10 Gbps와 30 Gbps 광 펄스열로부터 injection locking 방법에 의해 동기화된 광 펄스열을 재생하였다. 또한, 대신호 시영역 모델링을 이용하여 입력 광 펄스열의 평균 파워의 변화, 섭동에 대한 시스템의 반응을 해석하였다.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.223-230
• /
• 2009

For pulse trigger way and the energy injection rate according to PET ($Pause^{10-90}$ $Energy^{20-40}$ $Trigger^{1-7}$) function, indeed, human body condition, period of dormancy in this research about this back correctly adjustment possible and designed harmless micro carrying along style hair exclusion so that can design and manufacture and run special quality examination and Xenon flash lamp to crawl in human body. Because creating individual's skin model to do stable treatment by light transmission way by skin impedance and measure, must embody treatment special quality of most suitable that draw skin color, energy, wave length, approximately, transmission time, pulse delay etc. and want. Specially, saved standard of war treatment pulse modeling by skin impedance, and manufacture pulse modeling system of most suitable by skin subordinate, and embody suitable treatment pulse. Specially, embody as could do root of a hair exclusion being emitted in pulse form using multi wave length of 560nm, 590nm, 640nm, 755nm and embodied clinical data. If become research repletion furthermore little more, is seen that can approximate in commercialization.

• Journal of Acupuncture Research
• /
• 제24권5호
• /
• pp.207-217
• /
• 2007

Objectives: We investigated the safty of distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture on vital sign -BP, pulse, resperation-in adult man. Methods : We investigated on 106 healthy volunteers consisted of each 30 subjects in experiment (distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture) group and 30 subjects in control(Normal Saline) group. Study form was a randomized, placebo-controlled, double-blind clinical trial. 30 subjects in each experiment group were injected distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture, Rehmannia glutinosa Herbal Acupuncture at $GB_{21}$(Kyonjong) and 30 subjects in control group were injected Normal Saline at $GB_{21}$ (Kyonjong). except of 2 subjects(in control group) who can't be measured and 10 subjects(6 in experiment group and 4 in control group) who move or make unforceable error during measuring. Finally each 25. subject, subject, subject in experiment group and 24 subject in control group are studied. We measured resperation by PolyG-I and BP & pulse by electric manometer on 5 times : before injection per 5 minutes during and after injection per 10 minutes during 35 minutes. The SPSS 13.0 for windows was used to analyze the data and the Student t test(between two groups) were used to verify the result. Results : 1. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , systolic BP is not significantly change in all experiment time. 2. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , diastolic BP is not significantly change in all experiment time. 3. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , pulse is not significantly change in all experiment time. 4. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , resperation is not significantly change in all experiment time. Conclusions : The results suggest that distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture in healthy adult man don't influence vital sign within normal range. This result is derived from that distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture in healthy adult man are safety.