• 방사선산업학회지
• /
• 제6권3호
• /
• pp.231-237
• /
• 2012

This paper introduces a gamma-ray measurement system for a transportable tomography which is applicable for an industrial process diagnosis. The gamma-ray measurement system consists of pulse mode operating 72 channel CsI detectors, main AMP-pulse shaper, single channel analyzer, counter and control PC. The CsI crystal is coupled with a PIN diode which is connected to an amplifier and pulse shaper. For a compact design, the amplifier and pulse shaping circuit are included in a single package. 36 sets of CsI detectors are connected to a multi-channel counter through single channel analyzers. A computer controls and collects data from two multi-channel counters. This configuration results in 72 channel counting system in total. The CT rotator and radiation measurement system are controlled by a PC with LabVIEW program. Tomographic data were measured for a phantom by the measurement system and transportable gamma-ray CT. From the experimental data image reconstructions were performed by ML-EM algorithm. The result showed that the CsI detector system can be a suitable component for transportable gamma-ray CT system.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.553-563
• /
• 2010

본 논문에서는 UWB 대역에서 최적 임펄스 신호 전송을 위한 테이퍼 슬롯 안테나(Tapered Slot Antenna: TSA) 설계에 대해 연구하였다. UWB 대역에서 동작하는 TSA는 end-fire 특성을 갖는 광대역 안테나로, 펄스 전송을 위한 IR-UWB(Impulse Radio Ultra-Wide Band) 시스템에 적합하다. 지향성 특성을 갖는 테이퍼 슬롯 안테나는 UWB 대역에서 손실이 적고, 임펄스 전송시 최소 에러를 가져야 한다. 전송되는 펄스 왜곡을 최소로 하기 위해 테이퍼 슬롯 안테나 급전부를 구성하는 광대역 임피던스 변환기와 microstrip/slotline 천이부 설계에 대해 연구하였으며, 설계된 테이퍼 슬롯 안테나에 대한 펄스 충실도는 전자기파에 대한 시간 영역 분석이 가능한 CST를 이용한 FDTD(Finite-Difference Time-Domain) 시뮬레이션과 펄스 상관식 유도를 통해 계산하였으며, 제작된 안테나에 대해 두 안테나를 0.5 미터 이격시킨 두 안테나 사이에서 약 93.89 % 정도의 양호한 결과를 얻을 수 있었다. 또한 chirp Z-변환 알고리즘을 유도를 통해, 나노초 이하의 펄스 신호에 대해 zoom-in 기능을 부여함으로써 펄스 신호에 대한 왜곡, 지연 및 분산 특성 등의 분석이 가능하다.

• 대한임베디드공학회논문지
• /
• 제18권5호
• /
• pp.209-215
• /
• 2023

This study proposes an AC servo motor control program structure and its implementation method to efficiently integrate 13 types of additional compensation algorithms into the basic FOC (field-oriented control) algorithm program. Various compensation algorithms are necessary to enhance the stability and performance of machine tools by compensating for interference from disturbances and vibrations. Each compensation algorithm is implemented as a separate, independent function and called from a switch-case statement in the ISR (interrupt service routine) of the PWM (pulse-width modulation) device. The advantages of this approach include facilitating not only debugging and testing but also reducing the possibility of errors during the program development phase. Thus, it is easy to add and activate each specific compensation algorithm for the program update during the program operation phase. The implemented motor control program was experimented with a single-axis feed shaft testbed driven by a commercial AC servo motor control drive board and a 750 Watts SPMSM (surface-mounted permanent magnet synchronous motor), and the results verified its normal operation and performance improvement.

• 전자공학회논문지C
• /
• 제36C권7호
• /
• pp.17-26
• /
• 1999

본 논문에서는 접속된 주변장치와 데이터를 비동기로 교환 할 수 있는 접속 비트 전환식 양방향 접속 장치 설계에 대하여 기술한다. 특히 인터럽트 발생기를 설계하기 위해서 제시된 펄스형 순차회로 파형을 합성할 수 있는 진리치 비교 알고리즘을 제안하고 이를 인터럽트 레지스터 설계에 적용한 것에 대하여 상술하였다. 또한 개별 비트 출력 신호들의 클럭 스큐 현상을 없애기 위한 최종 출력 핀 제어 기법을 시스템에 적용하였으며 나머지 블록들을 설계한 기법에 대하여도 상술하였다. 이러한 기법을 사용함으로써 본 논문의 접속 포트들은 0.7ns 이내의 지연시간을 나타내었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.372-376
• /
• 2001

Due to several advantages of Pulse Width Modulation(PWM) Converter, such as unity power factor operation, elimination of low-order harmonics and regeneration of motor braking energy to source, the application range of PWM Converter has been rapidly extended in industrial application. Nowadays, vector control algorithm and space vector PWM(SVPWM) method are applied to improve the performances of PWM Converter, but vector control algorithm and SVPWM require to use Microprocessor and other digital devices in hardware, causing costly and somewhat large dimension system. In every practical application of energy conversion equipments, the design and implementation should be carried out considering cost and performance. High performance and low cost is the best choice for energy conversion equipments. So, this paper presents the practical design method and implementation results of 3-phase PWM Converter with analog hysteresis current controller, and verifies the performances of unit power factor operation and energy regeneration operation via experimental results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.3-6
• /
• 2008

Electrolytic in-process dressing (ELID) grinding is a new technique for achieving a nanoscale surface finish on hard and brittle materials such as optical glass and ceramics. This process applies an electrochemical dressing on the metal-bonded diamond wheels to ensure constant protrusion of sharp cutting grits throughout the grinding cycle. In conventional ELID grinding, a constant source of pulsed DC power is supplied to the ELID cell, but a feedback mechanism is necessary to control the dressing power and obtain better performance. In this study, we propose a new closed-loop wheel dressing technique for grinding wheel truing that addresses the efficient correction of eccentric wheel rotation and the nonuniformity in the grinding wheel profile. The technique relies on an iterative control algorithm for the ELID power supply. An inductive sensor is used to measure the wheel profile based on the gap between the sensor head and wheel edge, and this is used as the feedback signal to control the pulse width of the power supply. We discuss the detailed mathematical design of the control algorithm and provide simulation results that were confirmed experimentally.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.229-235
• /
• 2012

This paper dealt with the fabrication of a partial discharge (PD) analyzer for insulation diagnosis of power facilities like transformers, cables and gas-insulated switchgears. An analytic algorithm for the phase (${\phi}$), the magnitude (q), and the pulse count (n) of PD pulse was designed and a time-frequency (TF) map algorithm was applied in the system to eliminate noises by analyzing the time and the frequency component of signals. All the algorithms were operated by a LabView graphical program. The detection circuit consists of a coupling capacitor, a detection impedance, and a low noise amplifier. A plane-plane and a point-plane electrode system were fabricated to simulate different types of insulation defects. In the experiment, we could easily understand the characteristics of PD pulses using the prototype PD analyzer.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.119-122
• /
• 2005

A algorithm for control and performance of a pulse-density-modulated (PDM) series-resonant voltage source inverter developed for corona-dischange precesses is presented. The PDM inverter produces either a square-wave ac-voltage state or a zero-voltage state at its ac terminals to control the average output voltage under constant dc voltage and operating frequency. Moreover it can achieve zero-current-switching (ZCS) and zero-voltage-switching (ZVS) in all the operating condition for a reduction of switching lost. Even though the corona discharge load with a strong nonlinear characteristics, new high frequency resonant inverter is shown the wide range power control from 5% to 100%.

• Computers and Concrete
• /
• 제8권5호
• /
• pp.491-510
• /
• 2011

Before deciding if structures exposed to high temperature are to be repaired or demolished, their final state should be carefully examined. Destructive and non-destructive testing methods are generally applied for this purpose. Compressive strength and color change in mortars are observed as a result of the effects of high temperature. In this study, ordinary and pozzolan-added mortar samples were produced using different aggregates, and exposed to 100, 200, 300, 600, 900 and $1200^{\circ}C$. The samples were divided into two groups and cooled to room temperature in water and air separately. Compression tests were carried out on these samples, and the color change was evaluated by the Munsell Color System. The relationships between the change in compressive strength and color of mortars were determined by using a multi-layered feed-forward Neural Network model trained with the back-propagation algorithm. The results showed that providing accurate estimates of compressive strength by using the color components and ultrasonic pulse velocity design parameters were possible using the approach adopted in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.543-543
• /
• 2000

A new method for HRV(heart rate variability) detection from the R-wave signal, based on the IPFM(integral pulse frequency modulation) model and its similarity to pulse position modulation, is presented. The proposed method exert lowpass filtering with a Kaiser window. In this paper, The proposed method presents a powerful, but simple, tool for investigation of HRV. It also guarantees real-time behavior. simplicity in design, and phase linearity. Even without the basic assumption of IPFM model. the new algorithm can still be used on-line and with higher performance. It is thoroughly proved that lowpass filtering is an ideal method for PSD(Power Spectrum Density) analysis of HRV.