• 한국음향학회지
• /
• 제14권4호
• /
• pp.5-11
• /
• 1995

본 논문에서는 광디스크 드라이브가 디스크상의 데이터를 탐색하는데 소요되는 평균탐색 시간 (Average Seek Time)을 개선하기 위한 방법으로 트랙추적 기준신호 (ref_T. E)와 샘플펄스 신호를 사용하여 평균탐색시간을 줄일수 있는 새로운 알고리즘을 제안 하였다. ref_T. E신호와 샘플펄스 신호를 사용하여 트랙을 탐색할 경우 목적트랙으로 이동한 다음 다시 위치를 확인하고 보상할 필요가 없도록하여 평균탐색시간을 개선하였다. 실험결과 28sec의 평균탐색시간을 보였다.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.347-359
• /
• 1992

The movements of three striped jack (Caranx delicatissimus, 24cm of body length) were tracked by ultrasonic telemetry in the Nunoura Bay in August 1990. A school of the striped jack has been released near by the fish farming rafts by Goto branch of the Fisheries Agency and Japan Sea-Farming Association. To investigate the staying area and the swimming pattern of the fish, small size pinger($\Phi$8.5$\times$L35mm, 140dB re 1$\mu$Pa at 1m, 69kHz) was tagged on the dorsal fin without any anesthesia. The movements of three tagged fish are monitored at the same time with four omni-directional hydrophones. The locations of the fish are calculated by the hyperbolic method and tracked by a technique so called time division scheme which uses both the pulse interval and the phase. Three pingers used have the pulse interval of 1.7, 1.8 and 1.9sec, respectively, and the common pulse duration of 15ms. In results it was capable to estimate behavior right after the release, swimming speeds and approximate moving area of the fish. The movements were tracked for a week continuously, and it was found out that the staying area of the fish was around or under the farming rafts. Sometimes they swam together but most of the time they move separately. The average swimming speed of those fish was about two times of the body length.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.846-848
• /
• 1995

Recently, direct drive AC servo motor and DSP is widely used in the factory automation and related field due to the enhanced control and digital technology. In this paper, position control of direct drive AC servo motor and numerical interpolation algorithms are studied using DSP for the future applications. In the direct drived motor control, encoder pulse is divided into the quadruple pulse for the higher resolution and high speed pulse(10MHz) is used as reference for the slower speed motor control (M/T method). As for the general position control, PI controller is adapted for position control. In the trajectory tracking numerical algorithm, interpolation of straight line and curve algorithms are studied for the realization of path following capabilities of XY table. As for the DSP, ADSP 2105 is selected for the economy and performance points of view.

• 한국정보통신학회논문지
• /
• 제2권2호
• /
• pp.223-230
• /
• 1998

본 논문은 뉴랄퍼지를 이용한 디지탈식 제어기를 고주파 유도 가열기의 전력 조절을 위해 IGBT를 사용한 위상 전이(Phase-Shift) 펄스폭 변조(PWM)와 펄스 주파수 변조(PFM)가 조절되는 공진 고주파 인버터를 응용한 유도가열기를 설명한다. 이는 실제로 산업 현장에서 20KHz~500KHz 유도 가열 및 유도 용해 전원 장치용으로 쓰인다. 위상 전이(Phase-Shift) PWM 정전력 조절 기술을 바탕으로 한 적응 주파수 추종 기법은 스위칭 손실을 최소화하고 전력조절을 용이하게 하기 위해 소개되어졌다. IGBT를 사용하여 실험적으로 만들어진 실험장치는 성공적으로 논증과 토의가 되어졌다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1355-1362
• /
• 2007

본 논문에서는 태양광 발전의 효율을 높이기 위하여 센서와 마이크로프로세서를 이용한 태양광 위치추적 장치를 설계하여 고정 방식의 태양광 발전과 위치 추적 방식의 태양광 발전에 대하여 비교해 보았으며, 태양전지에 대한 특성 해석과 수학적 모델링을 통한 시뮬레이션을 행하여 태양전지 특성 사양과 비교해 보았다. 또한 전력변환 시스템을 Boost 컨버터와 전압형 인버터로 구성하여 각각에 대하여 실험하였으며, Boost 컨버터 제어에서 최대 전력점 추적을 위해 일정전압 제어법을 사용하였다. 인버터의 제어에서는 SPWM(Sinusoidal Pulse Width Modulation) 제어법을 사용하여 실험하여 좋은 결과를 나타내었다.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.179-188
• /
• 2019

Laser beam is directional and small in divergence angle so that it is well qualified to deliver high intensity infrared energy into a coming MANPADS threat for aircraft survivability. The threat will be deceived and loose tracking of a target when it is exposed to the laser beam modulated relevant to the track mechanism of the threat. The laser beam goes through scattering inside the seeker of the threat and reach the detector in a stray light form, which is a critical phenomenon enabling jamming of the seeker. The mechanism of the laser beam based jamming against a pulse modulated infrared seeker is shown. Simulations are carried out to support the understanding of how the jam technique works.

• The Journal of the Acoustical Society of Korea
• /
• 제19권2E호
• /
• pp.8-13
• /
• 2000

In this paper, we present an adaptive formant tracking algorithm for speech using closed phase WRLS-VFF-VT method. The pitch synchronous closed phase methods is known to give more accurate estimates of the vocal tract parameters than the pitch asynchronous method. However the use of a pitch-synchronous closed phase analysis method has been limited due to difficulties associated with the task of accurately isolating the closed phase region in successive periods of speech. Therefore we have implemented the pitch synchronous closed phase WRLS-VFF-VT algorithm for speech analysis, especially for formant tracking. The proposed algorithm with the variable threshold(VT) can provide a superior performance in the boundary of phone and voiced/unvoiced sound. The proposed method is experimentally compared with the other method such as two channel CPC method by using synthetic waveform and real speech data. From the experimental results, we found that the block data processing techniques, such as the two-channel CPC, gave reasonable estimates of the formant/antiformant. However, the data windows used by these methods included the effects of the periodic excitation pulses, which affected the accuracy of the estimated formants. On the other hand the proposed WRLS-VFF-VT method, which eliminated the influence of the pulse excitation by using an input estimation as part of the algorithm, gave very accurate formant/bandwidth estimates and good spectral matching.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.569-576
• /
• 2010

Jamming simulator has developed for the purpose of the test and evaluation on the electronic protection capabilities of the tracking radar onboard ship. This simulator has the capabilities to generate and radiate the jamming signals against the radar as well as those to receive, analyze and identify the radar signals at a real sea environment. The limited space of ship superstructure has led to the serious distortion caused by the ring around phenomenon that some sidelobes of the jamming beams were coming back to the receiving antenna. In this paper, we have proposed the methods to eliminate the ring around. First, we have inserted the groove metal screen between transmitting and receiving antennas. Second, we have used the PRI(Pulse Repetition Interval) tracking loop to control the switching timing of the input radar and the output jamming signal. Finally, we have demonstrated the performance and effectiveness of the proposed methods through the sea trial.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.31-38
• /
• 2006

이 논문에서는 클러터 환경에서 최적의 거리와 거리방향 속도 추적을 위한 검출문턱값과 파형 파라미터의 one-step-ahead 제어를 제시하였다. 파형 파라미터의 최적 제어는 파형 파라미터에 대한 제약 조건이 있는 상황에서 추적 성능지수를 최소화하는 것이다. 성능지수는 항적분실확률과 추정오차 공분산행렬의 함수로 표현하였다. 항적분실확률과 오차 공분산행렬은 하이브리드 알고리듬을 이용하여 얻었다. 거짓 검출과 클러터 간섭의 영향은 이 성능 예측 알고리듬에서 함께 고려되었다. 여기서 제안한 one-step-ahead 제어의 추적 성능을 여러 가지 수치실험을 통해 확인하였고, 이 제어 방법은 유한 구간의 최적화 결과로부터 얻어진 경험적인 방법이다.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.