• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.191-197
• /
• 2008

In this study, as a fuel filter for automobiles, base paper which can filtrate the polluted particles must satisfy with the standards of each vehicle. and a filter of impregnation paper made that combining the base paper with the resin. Therefore, They were wanted to found out the factors that affect base paper and impregnation paper according to content of HPZ, Mulberry pulp(MP), Laub holze bleached kraft pulp(LBKP). The most important things we wanted to find out in base paper and impregnation paper test were weight, thickness, air permeability, burst and tensile strength, maximum pore size and mean pore size, stiffness. we wanted to measure a rate of change of these condition by adjusting a rate of mixing for HPZ, MP and LBKP. Moreover, It suited for an impregnation paper mixed with a rate of mulberry pulp 20%, HPZ 40% and LBKP 40%. Used resins in this study was Phenol, Acryl, PVAc. And as every resins, sample was divided into existence and nothing of embossing. as a fuel filter for automobiles, It was appeared that the suitable condition of base paper was a rate of mixing for HPZ(40%), MP(20%) and LBKP(40%).

• 한국포장학회지
• /
• 제19권3호
• /
• pp.125-131
• /
• 2013

본 연구에서 개발된 멜론용 펄프몰드난좌의 진동전달특성을 구명하고 모의수송시험을 통해 적합성을 분석하였다. 멜론 펄프몰드 난좌의 중량이 증가할수록 압축강도는 상승하였고, 완충성능이 증가하는 것으로 나타났다. RMS 평균 가속도의 진동전달률을 살펴보면 펄프몰드 난좌의 중량이 증가할수록 진동전달률이 감소하는 경향을 보였다. 골판지 180 g 신문고지 50 g을 배합한 펄프몰드난좌의 경우 가진되는 진동가속도보다 큰 진동가속도가 전달되는 것으로 나타나 멜론의 포장에 적합하지 않은 것으로 나타났고, 골판지 200 g 신문고지 50 g을 배합한 펄프몰드난좌의 진동전달률이 가장 작게 나타나 멜론의 포장에 가장 적합한 것으로 나타났다. 또한, 기존 상자포장보다는 펄프몰드난좌 포장 시 진동의 전달이 작은 것을 알 수 있었으며, 펄프몰드 난좌의 중앙에 위치한 멜론과 비교하여 주변에 위치한 멜론에 전달되는 진동가속도가 큰 것을 알 수 있었다. 기존 상자포장과 펄프몰드난좌 포장의 모의 수송시험을 실시하여 경도를 측정한 결과, 무가진 멜론에 비하여 경도저하가 나타났지만, 난좌를 이용하여 포장하였을 때 기존 상자포장에 비하여 멜론의 경도 유지 효과가 우수함을 알 수 있었다. 따라서 본 연구결과 펄프몰드 난좌를 이용한 멜론포장은 수송 중 진동에 의한 품질저하 요인을 감소시켜 상품성 유지에 효과적인 방법이라 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.180-186
• /
• 1999

Eugenol has been reported to reduce odontogenic pain and is known to have a structure similar to capsaicin, a potent stimulant of certain nociceptors. We have hypothesized that the analgesic effect of eugenol may be due, in part, to inhibition of capsaicin-sensitive nociceptors. To test this hypothesis, we evaluate whether eugenol inhibits capsaicin-sensitive release of immunoreactive calcitonin generated peptide(iCGRP) from bovine dental pulp. Freshly extracted bovine incisors were transported to the lab. on ice, Spilitted and pulp tissue was removed. The tissue was chopped into 200${\mu}m$ slices. Dental pulp was superfused(340 ${\mu}l/min$) in vitro with oxygenated Kreb's buffer. Eugenol and vehicle(0.02% 2-hydroxyl-${\beta}$-cyclodextrin) were administered prior to stimulation of pulp with capsaicin and iCGRP was measured by RIA. The results were as follows: 1. Administration of eugenol has no effect on basal release of iCGRP. 2. In the vehicle treated group, capsaicin evoked a 2.5-fold increase over basal iCGRP levels. 3. Administration of eugenol(600 ${\mu}M$) reduced capsaicin evoked release of iCGRP by more than 40%(153.4${\pm}$41.1% vs 258.9${\pm}$21.7%). 4. 2-hydroxylpropyl-${\beta}$-cyclodextrin of less than 0.02% is found to be an effective vehicle to dissolve eugenol without evoking iCGRP release from dental bovine pulp. These data indicate that eugenol inhibits pulpal capsaicin-sensitive fibers and suggest that intracanal medicament of eugenol may relieve pain, in part, by this mechanism.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권4호
• /
• pp.296-299
• /
• 1998

After orthognathic surgery, postoperative complications are studied by many clinician. The complications include sensory disturbance, jaw fracture, excessive bleeding, condylar positional changes and loss of pulp vitality. Few surgical procedures are as satisfying for the surgeon and patient as a well-done orthognathic surgery. On the other hand, the patient is more satisfied with the result than who are treated with only orthodontic treatment especially in severe deformity case. There are problems that patient overcome but it is not serious complications. One of these, the problem about loss of pulp vitality can't influence function but give a lot of discomfort to the patient. From September 1997 to January 1998, 7 patients who are treated for dentofacial deformity via Le Fort I osteotomy or anterior segmental osteotomy were examined pulp sensitivity using digital pulp tester. This preliminary study have a focus on the investigation of recovery of pulp vitality. The electric pulpal test were used at preoperative, postoperative, at intervals. And we report some results acquired from this study. Follwing result are obtained 1. In anterior segmental ostetomy case (1 case), total 12 teeth were examined. Postoperative 8 weeks, 1 tooth are positive reaction 2. In Le Fort I osteotomy case (6 case), total 71 teeth were examined. Postoperative 8 weeks, 5 teeth are positive reaction

• 한국포장학회지
• /
• 제30권1호
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.22-26
• /
• 2006

• 펄프종이기술
• /
• 제30권1호
• /
• pp.95-103
• /
• 1998

Many new technologies and developments designed to increase paper machine speeds and improve paper printability have emerged in recent years. These improvements have changed the structure of paper and given winder manufacturers new challenges, especially as the requirements of printing presses have also changed. Ever-increasing roll widths and diameters are needed. Along with faster press speeds and shorter acceleration times, the unwinding of roils in the press room has become a true test of paper strength and roll structure, In the following we will review the special winding features of coated papers and discuss a selection of the winder type to meet a mill's specific needs.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 춘계학술발표논문집
• /
• pp.77-77
• /
• 2001

현대 제지 산업은 대량생산 체제로서 광폭화, 고속화 경향으로 가고 있으며, 생산성과 품질이라는 두 가지 목표가 상존 하고 있다. 여기에 더욱 다양한 공정변수가 삽입되어 기술개발의 범위도 더욱 다양해지고 어려워지는 상황이다. 이에 당사에서는 Pilot Coater의 도입으로 현장에 직접 적용되는 많은 Mill Test의 위험을 Pilot Coater에서 사전 검증함으로써 생산성과 기술개발의 두 가지 목적을 달성하고 있다. 현장공정의 많은 공정변수들을 Pilot Coaterdp 적용함으로서 그러한 변수에 대한 검증 또한 이루어지고 잇다.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.8-17
• /
• 2012

Three kinds of cationic acrylamide copolymer with different branch degree were prepared controlling the dosage of N, N'-methylenebisacrylamide. The physical characteristics of the branch-degree-modified copolymers were analyzed by intrinsic viscosity and charge density. The branch degree measurements were investigated by applying the colloidal titration phenomena using a spectrophotometer and comparison with the cationic regain measurement method. The results showed that the absorbance behaviors of spectrophotometer were distinctively different with the branch degree of copolymers. Also, the branch degree determinations and molecular structure estimations of the copolymers were numerically measured by applying the titration phenomena using a spectrophotometer. Finally, three kinds of branch-degree-modified copolymers were applied to flocculation test using arbocel micro pulp for the determination of flocculation behavior by different morphology of cationic acrylamide copolymers.