• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.511-516
• /
• 2000

The strength of the connecting joint of boxthorn(Lycium chinense Mill) fruits to tree twigs was determined experimentally at several pulling angles(0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$,45$^{\circ}$and 60$^{\circ}$) and at different harvesting seasons from August to November 1999 using an universal testing machine. The detachment force of mature fruits of boxthorn decreased as the pulling angle increased and varied with the harvesting season. The detachment force however did not gradually decreased as the harvesting season advanced due to difference of maturity of fruits from one harvesting season to another. Among three varieties of boxthron Cheongyang gugija Cheongyang native and Cheongyang ＃2, the maximum detachment force was 1.24 N at the pulling angle of zero degree. The highest detachment forve(1.29 N) of mature fruits of boxthorn appeared at the harvesting season of August, 1999.

• 대한인간공학회지
• /
• 제8권2호
• /
• pp.3-18
• /
• 1989

Two sets of isometric pushing and pulling experiments were performed by two male and two female susbjects. One set of experiments involoved isometric hand pushing and pulling in a standing erect posture, in which the thigh and pelvic regions of the subjects were braced to achieve the greatest strength. Another set of experiments involved isometric hand pushing and pulling in a free posture, in which the subjects elected their preferred postures to attain the largest strength at each of thred handle heights (low-66cm ; mid-109cm ; and high-152cm). It was shown from isometric pushing and pulling experiments in a standing erect poture that the rectus abdominis and the erector spinae muscles were acting as an antagonistic pair with respect to the L5/S1 intervertebral joint, and that the integrated EMG and the muscle force were linearly related. However, the relationships between the integrated EMG and the muscle force during isometric pushing and pulling in a free posture were not well-correlated. It is proposed that the integrated EMG results should be carefully interpreted for tasks of pushing and pulling at various handle heights.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.69-86
• /
• 2020

Purpose: This study aims to determine the optimal conditions for the spot welding process that mechanically connects the case of a cylindrical secondary battery and the negative tab. Methods: We use 33 factorial design to derive the optimal conditions for the spot welding process. The pulling strength, the cross-sectional area of nugget, and the shock test life are selected as response variables, which can represent the resistance welding quality. The input variables are selected as the welding time, welding voltage, and pressure, which are the controllable factors in the spot welding process. Results: The main effects of welding time and welding voltage and the interaction effect of welding time and welding voltage are significant. Conclusion: The optimal conditions for the spot welding process to mechanically join the negative electrode tab of the cylindrical secondary battery and the battery case are developed. The result shows that the pulling strength is increased by 44% compared to before improvement under optimal conditions.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.110-116
• /
• 1992

Electromgnetic joining of aluminum alloy tubes to high toughness polyurethane rubber cores is studied in order to estimate the joining strength and to analyze the effect of the process variables. The equation which can estimate the joining strength is proposed under considering the elastic recovery of the polyurethane core and the radial shrinkage of the core by pulling it axially. The obtained results are as follows : 1) The joining strength is mainly dependent on the magnitude of residual elastic strain of the polyurethane core. 2) The radial shrinkage (residual strain reduction) of the core during the axial pulling causes the joining strength to decrease severely. The equation for the reduced axial strength is proposed and it is found that the estimated values agree well with experimental results. 3) The magnitude of radial shrinkage could be reduced for the smaller value of ratio l/r. 4) The joining strength in metal/polymer joining increases as the friction coefficient increases. But its effect of friction coefficient is insignificant in comparison with the case of metal/metal joining.

• 한국세라믹학회지
• /
• 제19권1호
• /
• pp.44-50
• /
• 1982

Drawing optical fibers in a graphite furnace is one of the most convenient and economical means of producing optical fiber. Since the flaw formation on optical fiber is mainly due to dust contaminations during drawing and surface corrosion by water vapor penetration through coating layer, the tensile strength of optical fiber drawn in a graphite furnace is greatly inflenced by the drawing conditions. The important factors found in this investigation were preform treatment (fire polishing), furnace interior environment (dust contamination, inert gas flows), primary coating condition (resin curing temperature, coating materials, method, thickness) and fiber pulling condition (furnace temperature, drawing speed, pulling tension). The tensile strength at optimum drawing conditions turned out to be 5 ~ 6 GPa.

• 소성∙가공
• /
• 제22권4호
• /
• pp.223-228
• /
• 2013

The friction coefficients of advanced high strength steel sheets were experimentally determined. In the friction test, the pulling and holding forces acting on the sheet for various friction conditions, such as lubricant viscosity, pulling speed, blank holding pressure, sheet surface roughness, and hardness of the sheet were measured and the friction coefficient was calculated based on Coulomb's friction law. While the friction coefficient, generally, decreases as the value of friction factor increases, the factor associated with the sheet surface roughness shows U shape behavior for the friction coefficient. Furthermore, the relationship between friction coefficient and the wear volume, which was computed for the roughness of both sheet surfaces and the friction area, is linearly proportional.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.432-436
• /
• 1999

Fiber growth of $Al_{2}O_{3}/R-Al-O$ (R = Y, Gd, Dy, Ho, Er) eutectic by the micro-pulling down method is described. The thermal stability and strength at elevated temperature of each materials is evaluated in relation to the microstructure.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.403-418
• /
• 1999

Fiber growth of Al2O3/R-Al-O(R=Y, Gd, Dy, Ho, Er) eutectic by the micro-pulling down methods is described. The thermal stability and strength at elevated temperature of each material is evaluated in relation to the microstructure. PACS: 81.05 Mh, 81.10 Fq, 81.30-t.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.263-270
• /
• 1999

컴퓨터 하드디스크용 윤활제인 PFPE중 Z-DOL과 AM2001을 이용하여 pulling-up speed와 윤활제의 농도를 변화시키면서 윤활제의 두께변화를 알아보았으며, 또한 열처리를 통해 overcoat층인 carbon과 윤활제의 결합특성을 알아보았다. Pulling-up speed가 빠를수록, 그리고 윤활제의 농도가 증가할수록 윤활제의 두께는 두껍게 coating되었음을 알 수 있었으며, 또한 XPS을 이용하여 분석해 본 결과, overcoat층인 carbon에 존재하는 표면 오염물은 C-OH, CO가 지배적이었고, 열처리를 함으로써 overcoat층인 carbon과 윤활제의 결합력이 증진됨을 알 수 있었다.

• 한국결정성장학회지
• /
• 제10권5호
• /
• pp.345-349
• /
• 2000

Micro-pulling down법을 이용하여 $Al_2O_3/ZrO_2$eutectic fiber를 제조하여 그 미세구조 및 기계적 특성과 성장속도의 관계를 조사하였다. 성장속도는 0.1~15 mm/min였으며, 직경 0.2~2 mm, 길이 500 mm의 eutectic fiber를 제조하였다. $Al_2O_3/ZrO_2$eutectic fiber의 미세구조는 성장속도에 따라 rod-shape structure에서 lameller structure를 거쳐 lamellar pattern을 갖는 cellular structure로 변화하였다. lamellar thickness는 성장속도가 1 mm/min에서 15 mm/min로 증가함에 따라 380 nm에서 110 nm로 감소하였다. 이와 같은 성장속도에 따른 lamellar thickness의 감소경향은 inverse-square-root로 나타내면, = 1 -l/2와 같이 표현할 수 있다. 여기서 는 m, 는 m/s의 단위를 갖는다. 13.1 Gpa의 hardness, 900 Mpa의 상온인장강도를 나타냈으며, 성장속도의 증가 즉, interlamellar spacing이 감소함에 따라 증가하는 경향을 나타냈다.