• 제목/요약/키워드: Pull-in suture

검색결과 24건 처리시간 0.019초

Delayed Lateral Row Anchor Failure in Suture Bridge Rotator Cuff Repair: A Report of 3 Cases

  • Jeong, Jae-Jung;Ji, Jong-Hun;Park, Seok-Jae
    • Clinics in Shoulder and Elbow
    • /
    • 제21권4호
    • /
    • pp.246-251
    • /
    • 2018
  • Compared to single row repair, use of lateral row anchors in suture bridge rotator cuff repair enhances repair strength and increases footprint contact area. If a lateral knotless anchor (push-in design) is inserted into osteoporotic bone, pull-out of the lateral row anchor can developed. However, failures of lateral row anchors have been reported at several months after surgery. In our cases, even though complete cuff healing occurred, delayed pull-out of the lateral row anchor in the suture bridge repair occurred. In comparison to a conventional medial anchor, further biomechanical evaluation of the pull-out force, design, and insertion angle of the lateral anchor is needed in future studies. We report three cases with delayed pull-out of lateral row anchor in suture bridge rotator cuff repair with a literature review.

Revision of a Pull-out Suture Anchor in the Lateral Row During the Suture-bridge Technique

  • Kim, Kyung-Cheon;Rhee, Kwang-Jin;Shin, Hyun-Dae;Byun, Ki-Yong;Yang, Jae-Hoon;Kim, Dong-Kyu;Kim, Bo-Kun
    • 대한견주관절학회:학술대회논문집
    • /
    • 대한견주관절학회 2009년도 제17차 학술대회
    • /
    • pp.159-159
    • /
    • 2009
  • Repeated pulling-out of a suture anchor in the lateral row despite repeated attempts at insertion during a rotator cuff repair is not uncommon with the suture-bridge technique, especially in patients with osteoporosis. We describe a simple procedure for dealing with the pull-out of a PushLock anchor in the lateral row using a suture anchor with a suture eyelet during rotator cuff repair applying the suture-bridge technique.

  • PDF

Pull-in 봉합술을 이용한 수지건 원위 부착부 파열의 치료 (Pull-in Suture Technique for the Disinsertion of the Phalangeal Tendon Distal Insertion)

  • 김재원;정성모
    • Archives of Plastic Surgery
    • /
    • 제35권6호
    • /
    • pp.723-728
    • /
    • 2008
  • Purpose: The disinsertion of the phalangeal tendon distal insertion has difficulties in ordinary tenorrhaphy operation for the anatomical features, and still has controversy between non-surgical and surgical management. The purpose of this study is to select treatment for the injury of the phalangeal tendon distal insertion, as we've had a good results from operation treatment with Pull-in suture technique. Methods: We reviewed the hospital records of 12 patients treated with Pull-in suture technique with disinsertion of the phalangeal extensor or flexor tendon distal insertion from June 2006 to June 2007. Eight patients were involved with the tendon disinsertion without bone fracture, and 4 patients were involved with the fracture of the phalangeal tendon distal insertion site. After removal of the K-wire in week 6, active physical exercises were commenced immediately. The mean follow-up period was 12.4 months. Results: All the patients who had tendon disinsertion with bone fracture had IIB, by Wehbe and Schneider's classification 2, and we evaluated the results comparing the same finger of the other hand according to Crawford's evaluation criteria 5. The nine excellent and three good results were obtained and there were no limitation of motor for the patient who had operation for the rupture of flexor tendon as well. There were no particular complications during the follow-up period. Conclusion: The most important thing for the disinsertion of the phalangeal tendon distal insertion is to maintain an accurate and durable reduction state keeping the tension of tendon. At this point, after removal of the K-wire, the Pull-in suture technique allows accurate realignment of the tendon-bone unit without any specific instrumentation under the more stable state. The Pull-in suture technique seems to be a strong alternative for the treatment of disinsertion of the phalangeal tendon distal insertion, with successful treatment outcome(rapid functional recovery and high patient satisfaction).

관절경하 내측 반월상 연골 후각부 뿌리 파열의 수정된 견인 봉합술후의 임상적 결과 (The Clinical Results of Arthroscopic Modified Pull-Out Suture for Root Tear of Posterior Horn of Medial Meniscus)

  • 조진호
    • 대한정형외과스포츠의학회지
    • /
    • 제11권1호
    • /
    • pp.37-43
    • /
    • 2012
  • 목적: 내측 반월상 연골 후각부 뿌리 파열의 치료에 있어서 수정된 Pull-Out 봉합술을 시행한 후 임상결과를 알아보고자 하였다. 대상 및 방법: 2006년 3월부터 2011년 2월까지 내측 반월상 연골 후각부 뿌리 파열의 치료에 있어서 수정된 Pull-Out 봉합술을 시행 받은 환자 74예 중 최소 12개월 이상 추시가 가능하였고 동반 질환이 있는 환자를 제외한 40예를 대상으로 하였다. 평균 연령은 49.5세 였다. 체중 부하 단순 방사선 사진에서 Kellgren과 Lawrence분류상 정상이나 초기 퇴행성 관절염(1-2군)이며, 체중 부하 방사선 하지 scanogram검사에서 역학적 축을 측정하였을 때 내반 변형이 없거나 5도 이내의 경도의 내반 변형 환자를 대상으로 하였으며, 연골 손상의 정도는 수술 중에 Outerbridge 분류를 사용하였으며, 임상적 결과는 Lysholm knee score를 사용하였다. 결과: 최종 추시상 Lysholm Knee Score는 술전 63.9점(범위; 53~78점)에서 술후 86.3점(범위; 72~94점)으로 향상 되었다 (p>0.05). 봉합술이 완전 실패한 경우는 40예 중 3예였다. 이는 현재 경과 관찰중에 있다. 관절연골 병변은 20예에서 내측 대퇴골 체중 부하 부위에 있었고, Outerbridge 분류상 1기 12예, 2기 5예, 3기 3예였다. 결론: 내측 반월상 연골 후각부 뿌리 파열의 치료에 있어서는 먼저 환자의 관절염이나 내반 변형 같은 동반 질환 여부를 가려내는 것이 중요하며, 경도의 관절염이나 내반 변형이 있는 40~60대 중년의 환자에서 수정된 Pull-Out 봉합술을 시행할 경우 비교적 양호한 임상적 결과를 얻을 수 있을 것으로 사료된다.

  • PDF

HEAD GEAR가 상악골에 미치는 영향에 관한 유한요소법적 분석 (A FINITE ELEMENT ANALYSIS ON THE EFFECT OF THE HEADGEAR IN HUMAN MAXILLA)

  • 이인수;손병화
    • 대한치과교정학회지
    • /
    • 제15권2호
    • /
    • pp.211-227
    • /
    • 1985
  • The purpose of this study was to analyze the stress distribution and the displacement in the maxillary complex after the application of the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear.) Orthopedic force, 300 gram, was applied to the maxilla of the dry human skull in a high, straight and cervical direction. The stress distribution and the displacement within the maxillary complex was analyzed by a 3-dimensional finite element method. The results were as follow: 1. In won, the stress of conical pull head gear was the greatest stress and straight pull head gear was the medium stress and high pull head gear was the least stress. 2. The compressive stress was observed on the anterior portion of premaxilla, especially anterior nasal spine area, when the three kinds of head gear were applied to the dry kuman skull. 3. It appeared that the stress of the anterior portion of the zygomatic bone was greater than the posterior portion in the case of three kinds of head gear application and compressive stress was noted only at the below of the frontozygomatic suture of the zygomatic bone. 4. The backward, upward, sideward displacement of the alveolar area was observed in a high pull head gear application but in the case of straight pull head gear and cervical pull head gear application, the backward, downward, sideward displacement was observed. 5. The forward, downward, sideward displacement was observed on the midpalatine suture and premaxilla on the sagittal plane and transverse palatine suture in the case of three kinds of headgear application.

  • PDF

Suture Hook과 pull-out PDS를 이용한 경골극 골절의 관절경적 치료 (Arthroscopic Treatment of Tibial Spine Fracture using Suture Hook and pull-out PDS)

  • 이영국;김준석;손승원
    • 대한관절경학회지
    • /
    • 제3권2호
    • /
    • pp.132-137
    • /
    • 1999
  • 목 적 : 관절경하에서 전위된 경골극 골절을 suture hook와 PDS를 이용하여 견인봉합술을 실시하고 그 수술수기와 임상적 결과를 보고하고자 한다. 재료 및 방법 : 1997년 2월부터 1998년 6월까지 견인봉합술을 시행한 12명의 환자중 최소 1년이상 추시관찰이 가능하였던 7명의 환자를 대상으로 하였다. 7예 모두 수상후 3주이내의 급성 손상이며 증상 발현부터 수술까지의 평균 기간은 6.1일이었다. 7예중 4예에서 반월상 연골판파열, 내측 측부 인대손상등의 동반손상이 발견되었고 경골극 골절에 대한 수술시 동반손상에 대한 수술적 치료도 병행하였다. 결 과 : 추시기간은 평균 16.6개월로서, 7례 모두에서 골유합을 얻을수 있었으며 골유합시기는 평균 7.4주였다. 후방십자인대 견열골절 및 외측 반월상 연골판손상이 동반된 환자중 1례에서 관절 운동의 제한이 있었으나 수술후 1년 뒤 관절경적 유착 제거술이후 정상 관절 운동 범위를 보였다. 1명의 환자에서 경도의 전방 불안정성의 소견을 보였으나 자각증세나 일상생활의 제한이 없었다. 결 론 : Suture hook과 PDS를 이용한 관절경적 수술은 골편이 작거나 분쇄골절인 경우에도 해부학적 정복을 얻을수 있고, 조기 재활도 가능하므로 전위된 경골극 골절치료에 있어서 유용한 방법의 하나로 사료된다.

  • PDF

각종의 HEAD GEAR를 사용한 정형력이 두개안면 골에 미치는 영향에 대한 광탄성적 연구 (A PHOTOELASTIC ANALYSIS OF THE EFFECT OF ORTHOPEDIC FORCES ON THE CRANIOFACIAL COMPLEX UTILIZING THE THREE KINDS OF THE HEAD GEAR)

  • 김광호
    • 대한치과교정학회지
    • /
    • 제16권1호
    • /
    • pp.71-84
    • /
    • 1986
  • The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

  • PDF

In-vitro and in-vivo Behaviors of Poly(glycolide-caprolactone) Copolymer for Bioabsorbable Suture Materials

  • Yoo, Yeon-Chun;Kim, Hak-Yong;Jin, Fan-Long;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권12호
    • /
    • pp.4137-4140
    • /
    • 2012
  • A novel bioabsorbable suture material, poly(glycolide-caprolactone) (PGLCL) monofilament, was prepared by spinning of the PGLCL copolymer. The physical properties, strength retention, biocompatibility, and organism resolvability of the PGLCL monofilament were investigated. The results showed that the knot pull strength of the monofilament was higher than that stated in European Pharmacopoeia. The in vivo retention strength following implantation was 64%, 23%, 7%, and 0% after one, two, three, and four weeks, respectively. Mortality, clinical signs, validation, and sterility tests indicated that all items had passed. Organism resolvability tests showed that the PGLCL monofilament, as a suture, was absorbed within 91 days.

회전근 개 파열의 봉합에서 UU 봉합법은 변형된 MA(Mason-Allen) 봉합법을 대치할 수 있는가? - UU 봉합법과 변형된 MA 봉합법의 생역학적 비교- (Is the UU Stitch Really Alternative to Modified MA (Mason-Allen) Stitch for Rotator Cuff Repair? - Biomechanical Comparative Study of UU to Modified MA Stitch -)

  • ;고상훈;박기봉;전형민;김태원;임현우;염영진
    • Clinics in Shoulder and Elbow
    • /
    • 제12권2호
    • /
    • pp.207-214
    • /
    • 2009
  • 목적: 관절경 하 회전근 개 봉합에서 일반적으로 건-봉합간 접촉면 (tenon-suture interface) 에 약한부위 (weak link)가 형성되어 있어 관절경 하 회전근 개 봉합은 개방적 봉합술보다 높은 재파열율을 가진다. 이 연구의 목적은 봉합사를 뼈에 고정할 때 관절경으로 사용할 수 있는 UU (Ulsan University) 봉합과 개방적 변형 MA (Mason-Allen) 봉합의 강도를 비교하는 것이다. 대상 및 방법: 한 구의 사체 극상근 건을 채취하여 절반으로 나눈 후 다시 절반을 나누어 사체의 어깨 관절 한 구당 네 개의 건을 만들어 총 24개의 검체를 만들었다. 두 봉합 형태 (UU, MA)는 무작위로 선택하였으며 각각의 건에 시행하였다. 검체는 0.25 Hz에서 5~30N의 조절된 외력하에서 50회 주기 부하 (cyclic loading)를 받았다. 각 검체는 초당 1mm의 전이가 되는 상황하에서 파열이 발생할 때(ultimate tensile load)까지 부하를 받았다. 조건 이완 (condition elongation), peak-to-peak 전이(displacement), 기울기 (stiffness), 최대 인장력 (ultimate tensile load), 파열 양상 (mode of failure) 등을 기록하였다. 결과: 주기 부하 실험에서 두 봉합 형태 간 유의 있는 차이는 없었다. 최대 장력 실험에서 UU 봉합과 변형 MA (Mason-Allen) 봉합 간에 통계학적으로 유의한 차이는 없었다 (109.4 N, and 110.6 N). 양 봉합 형태에서 가장 흔한 파열 양상은 봉합의 빠짐 (suture pull-out)이었다. 결론: UU 봉합과 변형 MA 봉합은 유사한 생역학적 특성을 가진다.

내측 반월상 연골판 후방 부착부 파열의 관절경적 견인 봉합술 - 최소 5년 추시결과 - (Arthroscopic Pull-out Suture Repair of Posterior Root Tear of the Medial Meniscus - Minimum 5 Years Follow-up Results -)

  • 사공협;신홍관;이영국;배기철;조철현;이경재;손은석;김두한
    • 대한관절경학회지
    • /
    • 제16권2호
    • /
    • pp.153-159
    • /
    • 2012
  • 목적: 본 연구의 목적은 슬관절 내측 반월상 연골판 후방 부착부 파열 환자에 대해 관절경적 견인 봉합술을 시행한 후 임상적 및 방사선학적 5년 추시 결과를 보고하고자 한다. 대상 및 방법: 2001년 1월부터 2005년 5월까지 본원에서 내측 반월상 연골판 후방 부착부 파열로 진단받고 관절경적 견인 봉합술을 시행한 환자 중 5년 이상 추적 관찰이 가능하였던 30예를 대상으로 하였다. 평균 추시 기간은 76개월(60-90개월)이었다. 임상적 결과는 Lysholm knee score로 확인하였고 방사선학적 결과는 단순 방사선 사진을 이용한 Kellgren-Lawrence 분류를 이용하였으며, 전예에서 2차 관절경 수술을 시행하였다. 외상, 비만, 내반 변형 및 수술 시기 등과 임상적 결과를 비교 분석하였다. 결과: 임상적 결과는 수술 전 Lysholm knee score 평균 55점에서 5년 추시 시 평균 86점으로 호전을 보였고, 방사선학적 추시 검사 결과 23예에서 관절 간격의 유지 및 호전 소견 보였으며, 7예에서 관절 간격이 감소되는 등의 퇴행성 변화가 있었고, 그 중 1예에서 골 관절염의 진행 소견으로 추후 인공 관절 치환술을 시행하였다. 결론: 관절경적 견인 봉합술을 시행하여 최소 5년 추시에서 27예(90%)에서 양호 이상의 좋은 결과를 얻었으며 내반 각도가 클수록 임상적으로 호전되는 정도는 유의하게 낮았다.

  • PDF