• 자원리싸이클링
• /
• 제20권2호
• /
• pp.74-81
• /
• 2011

자동차 폐촉매로부터 폐촉매 중에 함유되어 있는 백금족 금속(Pt, Rh, Pd)를 회수하는 방법으로는 크게 건식법과 습식법이 현재 이용되고 있다. 본 연구에서는 건식 용융법으로 폐촉매로부터 백금족 금속 회수하기 위한 기초 실험으로 포집금속으로 Fe와 Cu을 사용하여 폐촉매를 용융하였을 때 각각의 농도 변화를 비교함으로써 용융 조건과 적정 포집금속으로 찾는 것을 목적으로 하였다. 본 실험으로 얻어진 결과를 요약하면 Fe을 포집금속으로 히는 것이 Cu을 포집금속으로 사용하는 것보다 회수율 측면에서 유리하였으며, 용융 처리 온도는 $1,500^{\circ}C$에 비교하여 $1,600^{\circ}C$ 용융 하였을 때 슬래그 중 잔류하는 백금족 금속의 농도 변화율이 크게 향상되었다. 용융 온도 $1,600^{\circ}C$의 경우 처리 후 슬래그 중 백금족 원소인 Rh, Pd, Pt의 평균 농도는 각각 6.21 ppm, 5.98 ppm, 6.97ppm으로, 이는 용융 온도 $1,500^{\circ}C$시 보다도 슬래그 백금족 원소 중 Rh와 Pd는 농도변화율 측면에서 각각 50.58%, 55.31%향상되었다. 그러나 폐촉매 중의 Pt의 초기농도가 12.9 ppm으로 낮아 용융처리 후 농도변화율의 비교가 어려웠다.

• 센서학회지
• /
• 제21권6호
• /
• pp.425-428
• /
• 2012

This paper presents the fabrication and characterization of graphene based hydrogen sensors. Graphene was synthesized by annealing process of Ni/3C-SiC thin films. Graphene was transferred onto oxidized Si substrates for fabrication of chemiresistive type hydrogen sensors. Au electrode on the graphene shows ohmic contact and the resistance is changed with hydrogen concentration. Nanoparticle catalysts of Pd and Pt were decorated. Response factor and response (recovery) time of hydrogen sensors based on the graphene are improved with catalysts. The response factors of pure graphene, Pt and Pd doped graphenes are 0.28, 0.6 and 1.26, respectively, at 50 ppm hydrogen concentration.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.131-137
• /
• 2005

The catalytic activity of precious metals(Rh, Pd, Pt) and nickel catalysts supported on ${\gamma}-Al_2O_3\;and\;CeO_2$ in the partial combustion of methane(PCM) to syngas was investigated based on the product distribution in a fixed bed now reactor under atmospheric condition and also on analysis results by SEM, XPS, TPD, BET, and XRD. The activity of the catalysts based on the syngas yield increased in the sequence $Rh(5)/CeO_2{\geq}Ni(5)/CeO_2>>Rh(5)/Al_2O_3>Pd(5)/Al_2O_3>Ni(5)/Al_2O_3$. Compared to the precious catalysts, the syngas yield and stability of the $Ni(5)/CeO_2$ catalyst were almost similar to $(5)/CeO_2$ catalyst, and superior to these of any other catalysts. The syngas yield of $Ni(5)/CeO_2$ catalyst was 90.66% at 1023 K. It could be suggested to be the redox cycle of the successive reaction and formation of active site, $Ni^{2-}$ and the lattice oxygen, $O^{2-}$ produced due to reduction of $Ce^{4-}$ to $Ce^{3-}$.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.846-850
• /
• 2001

In the present study, nano-size powders of ternary ferrites, $Ni_{0.5}Zn_{0.5}Fe_2O_4$, as the potential catalysts of $CO_2$decomposition, were prepared by the wet processing of hydrothermal synthesis and coprecipitation method, and the catalyzing effects of impregnation of the noble metals, Pt and Pd, onto $Ni_{0.5}Zn_{0.5}Fe_2O_4$for the $CO_2$decomposition were investigated. XRD results of the synthesized ferrites showed a typical spinel structure of ferrite and the particle size was very small as about 6~10 nm. BET surface area of the ternary ferrites was not affected by the impregnation of Pt and Pd. The reactivity of the $CO_2$decomposition to carbon was improved by the impregnation of the noble metals of Pd and Pt. The effect of Pd-impregnation on the $CO_2$decomposition rate was higher than Pt-impregnation.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.8-16
• /
• 2006

The research was conducted to characterize of Rh-Pd-Pt TWC with a double-layer washcoat for gasoline vehicle. The physical characteristics on surface of catalyst were inspected by BET, SEM and TEM. The characteristics of catalytic reaction were examined by the TPD/TPR and CO-pulse chemisorption. The catalyst $6Hx(0.35\times11\times3)$ showed superior conversion performance after hydrothermal aging process, which was due to small difference of the surface area between. the fresh and the aged catalyst. The CO-chemisorption and surface area were superior in the 600 cpsi catalyst than other catalysts, this catalyst also shown the higher conversion efficiency of the exhaust emissions. From the TPR test, the conversion performance of the aged catalyst was decreased by the agglomeration and sintering of the PM and metal oxides. From the TPD result, it was found that the NO chemisorption was happed on the bottom-layer washcoat with Pd, and the NO chemisorption was re-happened on the upper-layer washcoat with Pt and Rh in the desorption process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.145-145
• /
• 2000

M-CeO2 (M : noble metal) catalysts have been widely studied as three-way catalysts and methanol synthesis catalysts. Ceria is thought to play a number of roles in these catalysts. The Ce(IV)/Ce(III) redox pair may store/release gases under oxidizing/reducing conditions, extending the operational window. Additionally, metal-ceria interactions lead to several effects, including the dispersion of the active components and promoting the activation of molecules such as CO or NO. Pd is a promising component to current TWC formulations and behaves particularly well when compared with Pt and Rh-based catalysts for low-temperature oxidation of Co and hydrocarbon. However the effect of Pd-ceria interactions on the physicochemical properties of Pd and the redox properties of Ce is not elucidated yet. In order to know exactly about the metal-ceria interactions, the model study are expecting to give a better environment, resulting in the wide use of the surface science tools. The substrate was Si(100) wafer, on which Ta metal was sputtered as a thickness of 100nm. The CeO2 thin film of 30nm was deposited by using the magnetron sputtering. Spin coating and magnetron sputtering methods were used to make the Pd thin film layer. The prepared sample was investigated by in-situ XPS, AES, SEM and AFM analysis.

• 전기화학회지
• /
• 제15권1호
• /
• pp.12-18
• /
• 2012

다양한 응용분야에서 활용될 수 있는 고체고분자연료전지의 경우 현재 상용화에 가장 큰 걸림돌이 되고 있는 것이 고가의 백금 촉매이다. 따라서 특히 최근 들어 산소환원반응에서 백금을 대체하는 물질을 개발하기 위한 연구가 전세계적으로 확산되고 있다. 그러나 촉매 개발 시 경제성 관점 외에 내구성도 고려해야 하는데, 이런 관점에서 백금과 유사한 물성과 활성이 기대되는 백금족 원소들이 한 대안이 될 것이다. 가장 백금과 유사한 물성, 활성을 나타내는 팔라듐과 칼코겐화물 형태의 루테늄이 지금까지 가장 많이 연구가 되었으며 상대적으로 이리듐, 로듐, 오스뮴은 산소환원 촉매로 많은 연구가 되지 않았다. RDE (rotating disk electrode)를 이용한 반쪽전지 실험이나 연료전지 MEA (membrane electrode assembly) 운전을 통하여 백금과 활성을 비교해보면 팔라듐 계열의 비백금 촉매가 가장 백금에 가까운 활성을 나타내고 있음을 알 수 있다. 이 논문에서는 각 백금족 원소들 기반의, 현재까지 문헌상으로 보고된 촉매조성들을 분석하여 비백금 산소환원 촉매 개발에 도움이 되고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.870-876
• /
• 2006

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio(a), change cell numbers catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature. NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion increased with increasing of cell number in Pd catalyst. And Pt catalyst became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst at a=1.5 in this condition. In addition, CO and HC concentrations were decreased at a = 1.5 with Pd catalyst.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.154-159
• /
• 2005

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio( ), change cell numbers, catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature, NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion were increased with increasing of cell number in Pd catalyst. And Pt catalyst were became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst ${\alpha}$=1.5 in this condition. In addition, CO and HC concentrations were decreased${\alpha}$=1.5 with Pd catalyst.

• 한국대기환경학회지
• /
• 제15권3호
• /
• pp.249-255
• /
• 1999

We sdudied effect of additives on catalytic activity in thermal catalytic de-NOx process which was composed of thermal reduction, catalytic reduction and catalytic oxidation stage. Pd-Pt/${\gamma}$-$Al_2O_3$ catalysts with the addition of transition metals(Co, Cu, Fe, Ni, W, Zn, Zr) and rare earth metals(Ce, Sr) were prepared by the conventional washcoating method. Those catalysts were characterized by CO pulse chemisorption, ICP, $N_2$ adsorption, SEM and XRD. The effect of catalyst additives on NOx removal for diesel emission was studied in thermal catalytic de-NOx process at reduction temperature(350~50$0^{\circ}C$), space velocity(5,000~20,000 $hr^{-1}$) and the engine load(0~120kW). The concentraton of CO, $CO_2$, NO and $NO_2$ in the exhaust gas increased with the engine load. On the other hand the concentration of $O_2$ decreased. The de-NOx activityof all prepared catalysts increased with respect to high CO and low $O_2$ level in the thermal reduction stage of the process. Insertion of Ce to Pt-Pd/${\gamma}$-$Al_2O_3$ catalyst showed the best activity of all the catalysts under these experimental conditions. De-NOx catalysts are effective to remove CO in addition to NOx in the catalytic reduction stage.