• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.243-246
• /
• 2001

At atmosphere photoluminescence(PL) of porous silicon(PSi) decreases and peak wave number of PL is shifted to blue region. When PS is used light detector, the ageing effects are negative phenomena. For controling ageing effects, this paper uses Polymers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.235-235
• /
• 2010

The Anti-reflection coating(ARC) properties can be formed on silicon substrate using a simple electrochemical etching technique. This etching step can be improve solar cell efficiency for a solar cell manufacturing process. This paper is based on the removal of silicon atoms from the surface a layer of porous silicon(PSi). Porous silicon is form by anodization and can be obtained in an electrolyte with hydrofluoric. It have demonstrated the feasibility of a very efficient porous Si layer, prepared by a simple, cost effective, electrochemical etching method. We expect our research can results approaching to lower than 10% of reflectance by optimization of process parametaer.

• 통합자연과학논문집
• /
• 제4권1호
• /
• pp.11-14
• /
• 2011

Free-standing multilayer distributed Bragg reflectors (DBR) porous silicon dielectric mirrors, prepared by electrochemical etching of crystalline silicon using square wave currents are treated with polymethylmethacrylate (PMMA) to produce flexible, stable composite materials in which the porous silicon matrix is covered with caffeine-impregnated PMMA. Optically encoded free-standing DBR PSi dielectric mirrors retain the optical reflectivity. Optical characteristics of free-standing DBR PSi dielectric mirrors are stable and robust for 24 hrs in a pH 12 aqueous buffer solution. The appearance of caffeine and change of DBR peak were simultaneously measured by UV-vis spectrometer and Ocean optics 2000 spectrometer, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2079-2082
• /
• 2007

Photonic crystals containing rugate structure result in a mirror with high reflectivity in a specific narrow spectral region and are prepared by applying a computer-generated pseudo-sinusoidal current waveform. Well defined 1-dimentional photonic polymer replicas showing a reflectivity at 534 nm have been successfully obtained by the removal of rugate porous silicon (PSi) template from the polystyrene composite film. XRD measurement indicates that the oxidized rugate PSi has been completely removed from the composite films. Polymer replicas exhibit a sharp resonance in the reflectivity spectrum. Optical characteristics of photonic polymer replicas indicate that the surface of polymer film has a negative structure of rugate PSi. These replicas are stable in aqueous solutions for several days without any degradation. The methods have been provided for the construction of photonic structures with polymers.

• 통합자연과학논문집
• /
• 제2권3호
• /
• pp.207-210
• /
• 2009

Multiple rugate structures can be etched on a silicon wafer and placed in the same physical location, showing that many sharp spectral lines can be obtained in the optical reflectivity spectrum. Porous silicon samples were prepared by electrochemical etch of heavily doped p-type silicon wafers. The etching solution consisted of a 3:1 volume mixture of aqueous 48% hydrofluoric acid and absolute ethanol. Galvanostatic etch was carried out in a Teflon cell by using a two-electrode configuration with a Pt mesh counterelectrode. A sinusoidal current density waveform varying between 51.5 and $74.6mA/cm^2$ is applied. The anodization current was supplied by a Keithley 2420 high-precision constant current source which is controlled by a computer to allow the formation of PSi multilayer.

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.253-256
• /
• 2012

The rugate porous silicons containing multiple photonic band gaps have been generated by applying a composite waveform summed three computer-generated pseudo-sinusoidal current waveforms and exhibit three sharp photonic band gaps in the optical reflectivity spectrum. Generated multiple rugate porous silicons display three rugate peaks corresponding to the each of the sine components varied from 0.42, 0.36, and 0.30 Hz, with a spacing of 0.06 Hz between each sine component. The resulting rugate PSi films have been removed from the silicon substrate by applying an lift-off current and are then made into particles by ultrasono-method in a organic solution. The sensing experiments using these particles for organic solvents such as toluene, hexane, acetone, and methanol have been achieved. Condensing of organic vapors in the pores increases the refractive indices of entire particle which results a red shift in the photonic peaks.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.155-156
• /
• 2007

본 연구에서는 태양전지 표면에 입사된 빛의 반사율을 최소화하기 위해서 단결정 실리콘 기판 표면에 다공성 실리콘층을 적용하여 반사방지막(Anti-Reflection Coating, ARC)을 형성하는 실험을 하였다. 다공성 실리콘(Porous silicon, PSi)은 실온에서, 기판 성질에 따라 일정 비율로 만든 전해질 용액($HF-C_2H_5OH-H_2O$)을 사용하여 실리콘 표면에 양극산화처리 함으로써 단순 공정만으로 실리콘 기판의 반사율을 낮출 수 있다. 본 연구는 일정한 면저항을 가지는 단결정 실리콘 기판에 다공성 실리콘층을 여러 조건으로 형성하여 반사방지막으로써의 특성을 비교 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1363-1365
• /
• 2001

다공질 실리콘(PSi)의 형성방법중에 가장 주된 방식인 전기화학법은 매우 범용화된 기술이다. 이러한 전기화학법을 이용한 PSi 제작방식에 있어 HF 가 함유된 전해액과 첨가되는 첨가제는 PSi 형성에 매우 중요한 역할을 한다. 전해액에 첨가되어지는 첨가재는 종류에 따라 전해질과 기판사이의 친수성 및 전해액의 표면장력을 작게 하는 역할을 하며, 그 밖의 기판 표면 상태변화의 원인으로서 양극산화 공정에 많은 변수로 작용한다. 본 논문에서는 기존의 에틸알콜을 함유한 HF 전해액과 새로운 용매를 함유한 HF 전해액에 대한 PSi의 형성을 광학 현미경 사진과 시간에 따른 전류 및 전압 특성 곡선으로 비교 분석하였으며, 기존 식각 용액을 사용했을 경우의 표면 식각현상과 형성구조의 불균일성 등을 해결할 수 있었다.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.221-226
• /
• 2007

광 발광성 (photoluminescence, PL)과 광 반사성(reflectivity)의 두 가지 광학적 성질을 동시에 가지고 있는 새로운 다층 DBR(distributed Bragg reflector) 다공성 실리콘 composite 필름을 개발하였다. 발광 효율이 높은 실리콘 고분자 폴리실올을 PMMA(polymethylmethacrylate)에 첨가하여 다층 DBR 다공성 실리콘 표면에 코팅을 한 composite 필름을 제조하였다. 이 composite 필름은 510 nm에서의 발광스펙트럼과 565 nm에서의 반사스펙트럼을 동시에 나타낸다. 이러한 composite 필름은 광학적 정보가 저장되어있고 물리적인 힘을 가하여도 그 광학적 정보를 잃지 않는 장점을 갖는다. 또한 다층 DBR 다공성 실리콘 필름은 쉽게 부서지는 단점 때문에 다루기가 어려운 반면 composite 필름은 고분자로 고형화 되어있으므로 기계적인 안정도를 증가시킬 수 있었다.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.41-44
• /
• 2009

Photonic crystals containing multiple rugate structure are prepared by electrochemical etchings. Typically etched rugate PSi prepared in this study. Etching is carried out in a Teflon cell by using a two-electrode configuration with a Pt mesh counter electrode. They exhibit sharp photonic band gaps in the optical reflectivity spectrum. This reflectivity can be tuned to appear anywhere in the visible to near-infrared spectral range, depending on the programmed etch waveform. We study the method of full width half maxima and reflectivity index control by using amplitude.