• 제어로봇시스템학회논문지
• /
• 제21권10호
• /
• pp.903-909
• /
• 2015

This article presents an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) under saturation of front lateral tire force. Regardless of the use of AFS, the front lateral tire forces can be easily saturated. Under the saturated front lateral tire force, AFS cannot be effective to generate a control yaw moment needed for the integrated chassis control. In this paper, new integrated chassis control is proposed in order to limit the use of AFS in case the front lateral tire force is saturated. Weighed pseudo-inverse control allocation (WPCA) with variable weight is adopted to adaptively use the AFS. To check the effectiveness of the proposed scheme, simulation is performed on a vehicle simulation package, CarSim. From simulation, the proposed integrated chassis control is effective for vehicle stability control under saturated front lateral tire force.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.60-65
• /
• 2003

In this study, for estimating responses of a controlled structure and determining the maximum control force of velocity-dependent damping devices, three estimation models such as Fourier envelope convex model, probability model, and Newmark design spectrum are used. For this purpose, a procedure proposed by Gupta (1990) for estimating spectral velocity using pseudo-spectral velocity which is given by the estimation models is used and modified to consider the effects of increased damping ratio by the damping device. Time history results indicate that Newmark design spectrum gives the best estimation of maximum control force for over all period structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.564-567
• /
• 1997

In the design of structure the forces acting on the structure are important parameter for noise and vibration control. However, in the complex structure, the forces at the injection point on the structure cannot be measured directly. Thus it is necessary to find out indirect force evaluation method. In this paper forces have been measured with in-situ vibration responses and system information. Three existing techniques of indirect force measurement, viz. direct inverse, principal component analysis and regularization have been compared. It has been shown that multi-vibration responses are essential for the precise estimation of the forces. To satisfy those conditions, Rotary compressor is adopted as test sample, because it is very difficult to measure the injection forces from internal excitation to shell. It has also been obtained that relatively higher force is transmitted though three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation with curvature shell and plate and is investigated the possibility of force evaluation of rotary compressor as a complex structure.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.503-511
• /
• 2004

본 연구에서는 푸리에 모델, 확률 모델, 그리고 Newmark 설계 스펙트럼 방법과 같은 응답예측 모델을 사용하여 속도의존형 감쇠장치에 의해 제어되는 구조물의 응답과 제어기의 최대제어력을 예측하였다. 이를 위해, 유사 속도로부터 실제 속도를 예측하는 방법이 제안되었으며, 이 방법은 감쇠장치에 의해 증가되는 감쇠비의 실제속도에 대한 효과를 고려한다. 시간이력해석결과는 정확한 최대제어력을 예측하기 위해서는 실제속도가 사용되어야 하며, 제안된 방법에 의해 수정된 Newmark 설계 스펙트럼이 가장 전 주기구간에 걸쳐 정확한 예측 값을 산정함을 보여준다.

• 한국컴퓨터정보학회논문지
• /
• 제23권7호
• /
• pp.49-56
• /
• 2018

Virtual object weight perception is an important topic, as it heightens the believability of object manipulation in immersive virtual environments. Although weight perception can be achieved using haptic interfaces, their technical complexity makes them difficult to apply in immersive virtual environments. In this study, we present a visual pseudo-haptic feedback system that simulates and depicts the weights of virtual objects, the effect of which is weight perception. The proposed method recognizes grasping and manipulating hand motions using computer vision-based tracking methods, visualizing a Force Arrow to indicate the current lifting forces and its difference from the standard lifting force. With the proposed Force Arrow method, a user can more accurately perceive the logical and unidirectional weight and therefore control the force used to lift a virtual object. In this paper, we investigate the potential of the proposed method in discriminating between different weights of virtual objects.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.402-409
• /
• 2017

Selection of optimal cutting conditions is important for improving productivity and implementing efficient process control in metal machining. In this study, improvement of cutting conditions in machining using end-mills is studied by using deep-layered neural networks, which comprise an input layer, output layer, and two hidden layers. System networks are designed with inputs as cutting conditions, and they output the cutting force. A pseudo-inverse network is designed that has the adjustable cutting condition as output and cutting force and other cutting conditions as input. The combination of the system network and pseudo-inverse network enables selection or improvement of cutting conditions that results in the expected cutting force.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.43-50
• /
• 2002

In the design of structure, the forces acting on tai structure are key parameter fur noise and vibration control. However, in the complex structure, the forces at the injection point on the structure cannot be measured directly. So, it is necessary to find out Indirect force evaluation method. In this paper, forces have been measured with In-situ vibration responses and system information. And, three existing techniques of indirect force measurement, vita. direct inverse. principal component analysis and regularization have been compared. This paper shows that multi-vibration responses are essential for talc precise estimation of the forces. To check these conditions, rotary compressor is adopted as test sample, because it is very difficult to measure the injection forces from internal excitation to shell. It alas also been obtained that relatively higher force is transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation with curvature shell and plate.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.795-806
• /
• 2017

According to the characteristics of continuous beam bridges, the relative displacement is too large to collision or even girder falling under earthquakes. A device named Cable-sliding Modular Expansion Joints(CMEJs) that can control the relative displacement and avoid collision under different ground motions is proposed. Working principle and mechanical model is described. This paper design the CMEJs, establish the restoring force model, verify the force model of this device by the pseudo-static tests, and describe and analyze results of the tests, and then based on a triple continuous beam bridge that has different heights of piers, a 3D model with or without CMEJs were established under Conventional System (CS) and Seismic Isolation System (SIS). The results show that this device can control the relative displacement and avoid collisions. The combination of isolation technology and CMEJs can be more effective to achieve both functions, but it need to take measures to prevent girder falling due to the displacement between pier and beam under large earthquakes.

• 대한기계학회논문집A
• /
• 제41권2호
• /
• pp.111-119
• /
• 2017

본 논문은 자세 제어 장치(ESC)와 후륜 조향 장치(RWS)를 장착한 통합 섀시 제어기의 성능을 향상시키기 위해 후륜 조향각을 결정하는 방법을 제안한다. 차량을 안정화시키기 위해 필요한 제어 요 모멘트는 자세 제어 장치와 후륜 조향 장치를 이용하여 만들어진다. 각 장치의 타이어 힘을 결정하기 위해 의사역행렬 제어할당 방법을 적용한다. 제어기의 성능을 향상시키기 위해 후륜 조향 장치의 조향각을 결정하는 데에 네 가지 방법을 적용한다. 차량 시뮬레이션 패키지인 CarSim에서 시뮬레이션을 수행하여 제안된 방법들이 통합 섀시 제어기의 성능을 향상시킬 수 있음을 검증한다.

• 한국공간구조학회논문집
• /
• 제11권2호
• /
• pp.139-149
• /
• 2011

케이블 구조물은 비교적 가볍고 넓은 공간의 형성이 쉬우나 유연한 특징으로 인해 형상의 제어가 매우 민감하다. 이런 구조물은 여러 이유에서 형상의 보정이 필요하며, 특히 부재 제어량과 어떠한 부재를 제어해야 하는가는 것은 많은 연구자들이 고심하고 있는 문제이다. 따라서 본 논문의 목적은 하중법(Force Method)를 이용해서 형상조절을 위한 변위 제어기법을 연구하는 것이다. 논문은 2장에서는 제어 방정식을 설명하고, 3장에서는 단순 케이블 넷 모델을 이용하여 동시 및 순차제어를 고려해 해석을 수행하고 결과를 고찰한다. 4장에서는 보다 더 복잡한 케이블 돔 구조물에 적용하여 가장 유용한 부재에 대해서 논의 하고, 5장에서 결과를 요약한다.