• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.581-584
• /
• 2003

It is important to know phase offsets of PN (Pseudo Noise) sequences in spread spectrum communications since the acquisition is equivalent to make a phase offset between a receiving PN sequence and a PN sequence of local PN generator be identical. In this paper, a phase offset enumeration method for PN sequences with error detection, and its application to the synchronization are proposed. The phase offset enumeration far an n-tuple PN sequence and its error detection are performed when one period of the sequence is received. Once the phase offset of the receiving sequence is calculated, we can easily accomplish the synchronization by initializing shift registers of a local PN generator according to the phase offset value. The mean acquisition time of the proposed synchronization method is derived analytically, and we see that the method acquires very fast acquisition in the high SNR (Signal-to- Noise Ratio) environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3053-3059
• /
• 2010

In DS-CDMA method, Mobile Stations own jointly one radio channel and are made to use a PN code (Pseudo-Noise Code) for the purpose of minimize interference. However, corelation value of PN code is one when time delay is zero but the corelation value is 1 / N when time delay is not 0. Therefore corelation characteristic does not fully attained. As a result, when the user increase, the performance degradation and system capacity problem will be able to occur by interference among users. In this paper, the PN code has ideally self corelation. It was proved that PN code could depress interference from other users in multiple access system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.678-683
• /
• 2003

The pseudo-noise (PN) code acquisition based on the sequential estimation (SE) proposed by Ward performs well only at relatively high chip signal-to-noise ratios (SNRs). In this paper, a seed accumulating sequential estimation (SASE) method and a PN code acquisition system based on it are proposed, which perform well at low chip SNR (of practical interest) also. Then, the mean acquisition time performance of the proposed system is investigated. Numerical results show that the system based on the SASE performs dramatically better than that based on the SE at low chip SNR, and the improvement becomes larger as the period of PN code increases.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.311-316
• /
• 2006

We propose the optical sensor network using optical CDMA with bipolar receiver and modified Pseudorandom Noise codes which are widely used in the wireless communication network. We numerically analyze the performances in the optical sensor network. In the proposed network, multiple access interferences between two sensors are suppressed by performing synchronization between the optical encoder and the optical decoder and adjusting the delay times of optical delay lines. Numerical simulations confirm that the performance can be acquired by suppressing the beat noise among optical signals as the number of sensors increases.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.27-35
• /
• 1999

In this paper, we propose an error detection scheme of phase offsets for binary sequences including PN (Pseudo Noise) sequences based on the number theoretical approach. It is important to know phase offsets of spreading sequences in the CDMA (Code Division Multiple Access) mobile communication systems because phase offsets of the same spreading sequence are used to achieve the acquisition and are used to distinguish each base station. When the period of the sequence is not very long, the relative phase offset between the sequence and its shifted replica can be found by comparing them, but as the period of the sequence increases it becomes difficult to find the phase offset. The error detection failure probability of the proposed method is derived, and it is confirmed by the simulation results. We also discuss the circuit realization of the proposed method and show it can be easily implemented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.971-980
• /
• 1994

The need increased capacity in the cellular system has resulted in the adoption of digital technology with CDMA as the channel access method. It has been recognized that the distinction of the base station is important for its performance in CDMA, since the same spreading sequences are used by the all base stations. Time offset of the pseudo-random noise binary code are used to distinguish signals received at a mobile station from different base station. But the start of the zero offset PN sequence is chosen arbitrary without the background of the systematic and mathematical elaboration. This paper proposes a mothed that define the start of the zero offset PN sequence mathematically. This paper also discusses a method that can easily calculate the time offset of the received spreading sequence with respect to the zero offset PN sequence.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.864-875
• /
• 2012

In this paper, we propose a carrier frequency offset estimation method for single-carrier MIMO systems. In the proposed method, phase rotated PN (Pseudo-Noise) sequences are transmitted to prevent a cancelling out of partial PN sequences. After removing a modulation of received PN sequences by multiplying of complex conjugated PN Sequences which are locally generated in receiver, a CFO (Carrier Frequency Offset) is accurately estimated by employing L&R method which is a kind of ML (Maximum Likelihood) estimation algorithm and uses multiple auto-correlatos. In addition, the frequency offset estimation scheme by using channel state information is proposed for accurate CFO estimation in time-varying Rayleigh channel. By performing computer simulations, MSE (Mean Square Error) performance of proposed method is almost same as MSE performance of SISO systems in AWGN channel. Moreover, MSE Performance of proposed method with using channel information is higher than MSE performances of SISO system and conventional method in time-varying Rayleigh channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.37-44
• /
• 1997

We implemented a code searcher which is used for the PN(pseudo noise) code acquisition in CDMA cellular mobile station. To reduce the reuired hardware and the code acquisition time, we used the double dwell structure which is an effective serial code acquisition metho. We designed a code acquisition has acquired within 1/2 PN chip range. The code searcher is implemented using 0.8 micron code searcher is successfully working in CDMA cellular mobile station and it satisfies the code acquisition time specified in IS-95 standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.816-829
• /
• 2003

In this paper, we evaluate the performance of PN (Pseudo Noise) code based time hopping sequences for M-ary UWB (Ultra Wide Band) multiple access systems using the equicorrelated signal sets. In particular, we consider two different types of M-ary UWB systems in UWB indoor wireless multipath channels: The first type of the systems (System #1) has identical symbol transmission rate regardless of the number of symbols M since the length of signal pulse train is fixed while M increases, and the second type of the systems (System #2) has the same bit transmission rate regardless of M since the length of signal pulse train is extended according to the increase of M. We compare the proposed systems with those using the ideal random time hopping sequence in terms of the symbol error rate performance. Simulation results show that the PN code based time hopping sequence achieves quite good performance which is favorably comparable to that of the ideal random sequence. Moreover, as M increases, we observe that System #2 shows better robustness against multiple access interference than System # 1.