• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.225-240
• /
• 1999

This paper presents a mechanistic approach to uniaxial viscoelastic constitutive modeling of asphalt concrete that accounts for damage evolution under cyclic loading conditions. An elasticviscoelastic correspondence principle in terms of pseudo variables is applied to separately evaluate viscoelasticity and time-dependent damage growth in asphalt concrete. The time-dependent damage growth in asphalt concrete is modeled by using a damage parameter based on a generalization of microcrack growth law. Internal state variables that describe the hysteretic behavior of asphalt concrete are determined. A constitutive equation in terms of stress and pseudo strain is first established for controlled-strain mode and then transformed to a controlled-stress constitutive equation by simply replacing physical stress and pseudo strain with pseudo stress and physical strain. Tensile uniaxial fatigue tests are performed under the controlled-strain mode to determine model parameters. The constitutive equations in terms of pseudo strain and pseudo stress satisfactorily predict the constitutive behavior of asphalt concrete all the way up to failure under controlled-strain and -stress modes, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.715-718
• /
• 2002

This paper describes the Boolean and sectioning operations on pseudo-solid models. A pseudo-solid model is defined as a sheet body that looks like a solid model but cannot comprise a solid model due to tolerance. Most of CAD models imported from the other CAD system are pseudo-solid models and have to be repaired for further stolid modeling operations. However, healing a pseudo-solid model is a very tedious and cumbersome process. To solve this problem, we devised and implemented the Boolean and sectioning operations on pseudo-solid models. Using these operations, mold and die design can be performed more efficiently, as healing work is reduced greatly.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.244-247
• /
• 2010

입체 영상의 왼쪽과 오른쪽이 서로 바뀐 'pseudo-stereoscopic' 영상에서는 올바른 입체감을 느끼기 어려운데, 이를 해결하기 위해서는 직접 눈으로 보고 'pseudo-stereoscopic' 영상 여부를 판단하여 두 영상을 바꿔줘야 하는 불편함이 있었다. 따라서 본 논문에서는 입체 영상 사이에 갖고 있는 특성을 이용하여, pseudo-stereoscopic 영상을 자동으로 확인하고, 이를 바꿔주는 방법을 제시하고자 한다. 이를 위해 입체 영상으로부터 카메라의 종류를 확인하여, 교차축 카메라의 경우는 교정화 과정을 수행한다. 그리고 한 쪽 영상에서 선택한 비교 영역과 다른 쪽 영상의 대응 영역 사이의 변이 값을 비교함으로써 pseudo-stereoscopic 영상을 판단하고, 올바르게 바꿔줌으로써 시청자가 올바른 입체감을 느낄 수 있도록 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1601-1604
• /
• 2003

This paper describes a split operation for generation of core and cavity plates of an injection mold for a pseudo-solid model of a plastic part. Here, a pseudo-solid model means a sheet model that looks like a solid model. but whose boundary is not closed. When a solid model created in a different CAD system is imported through standard data exchange format, a pseudo-solid model is created in most cases as tolerance or some other problems make sewing operation failed. As most existing mold design system based on solid modeling kernels require a complete part solid model, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. The essential capability of mold design system is the split operation for generation of core and cavity plates. Thus. we developed a split operation for pseudo-solid part model to eliminate or reduce healing preprocessing for mold design.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.35-42
• /
• 1998

This paper presents the introduction of Pseudo-2 axes robot module and its GA-based fuzzy control implementation. Pseudo-2 axes robot module which use a single motor and controller for driving 2 joints of a robot mechanism, is devised towards a lower priced robot with its degree of freedom maintained GA-based Fuzzy controller is considered for the better control implementation of the developed system than the conventional PID controller. Here. the scaling factors of the membership function with high fitness values are selected using a genetic algorithm for a pulse-type input trajectory. The obtained controller also shows better trajectory tracking performance than a PID controller.

• Earthquakes and Structures
• /
• 제4권5호
• /
• pp.489-508
• /
• 2013

Design spectra for damping ratios higher than 5% have several important applications in the design of earthquake-resistant structures. These highly damped spectra are usually derived from a 5%-damped reference pseudo-acceleration spectrum by using a damping modification factor. In cases of high damping, the absolute acceleration and the relative velocity spectra instead of the pseudo-acceleration and the pseudo-velocity spectra should be used. This paper elaborates on the recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts. This is accomplished with the aid of correction factors obtained through extensive parametric studies, which come out to be functions of period and damping ratio.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.669-676
• /
• 2018

The "pseudo-wedge" failure is a name for a complex instability occurring at the Sarcheshmeh open-pit mine (Iran). The pseudo-wedge failure contains both the rock bridge failure and sliding along pre-existing discontinuities. In this paper, a cross section of the failure area was first modeled using a bonded-particle method. The results indicated development of tensile cracks at the slope toe which explains the freedom of pseudo-wedge blocks to slide. Then, a three-dimensional discrete element method was used to perform a block analysis of the instability. The technique of shear strength reduction was used to calculate the factor of safety. Finally, the influence of geometrical characteristics of the mine wall on the pseudo-wedge failure was investigated. The safety factor significantly increases as the dip and dip direction of the wall decrease, and reaches an acceptable value with a 10-degree decrease of them.

• 대한수학회논문집
• /
• 제25권4호
• /
• pp.615-621
• /
• 2010

We study pseudo symmetric (briefly $(PS)_n$) and pseudo Ricci symmetric (briefly $(PRS)_n$) warped product manifolds $M{\times}_FN$. If M is $(PS)_n$, then we give a condition on the warping function that M is a pseudosymmetric space and N is a space of constant curvature. If M is $(PRS)_n$, then we show that (i) N is Ricci symmetric and (ii) M is $(PRS)_n$ if and only if the tensor T defined by (2.6) satisfies a certain condition.

• 대한수학회논문집
• /
• 제35권4호
• /
• pp.1269-1281
• /
• 2020

In this article, we show that a pseudo-Hermitian magnetic curve in a normal almost contact metric 3-manifold equipped with the canonical affine connection ${\hat{\nabla}}^t$ is a slant helix with pseudo-Hermitian curvature ${\hat{\kappa}}={\mid}q{\mid}\;sin\;{\theta}$ and pseudo-Hermitian torsion ${\hat{\tau}}=q\;cos\;{\theta}$. Moreover, we prove that every pseudo-Hermitian magnetic curve in normal almost contact metric 3-manifolds except quasi-Sasakian 3-manifolds is a slant helix as a Riemannian geometric sense. On the other hand we will show that a pseudo-Hermitian magnetic curve γ in a quasi-Sasakian 3-manifold M is a slant curve with curvature κ = |(t - α) cos θ + q| sin θ and torsion τ = α + {(t - α) cos θ + q} cos θ. These curves are not helices, in general. Note that if the ambient space M is an α-Sasakian 3-manifold, then γ is a slant helix.

• 한국CDE학회논문집
• /
• 제10권3호
• /
• pp.151-161
• /
• 2005

This paper describes the parting and Boolean operations for a pseudo-solid model of a plastic part, and their application to injection mold design. Here, a pseudo-solid model means a sheet model that looks like a solid model, but its boundary is not closed. When a solid model created in a different CAD system is imported through a standard data exchange file format, in most cases, a pseudo-solid model may be created due to tolerance or some other problems. However, most existing mold design systems based on solid modeling kernels require a complete part solid model. Therefore, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. To eliminate or reduce the healing pre-process for mold design, in this paper, we proposed the parting and Boolean Operations on pseudo-solid part models. This paper also describes their detailed implementation and a case study.