• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.455-472
• /
• 2000

Instrumentation for periodontal therapy may induce marginal damage which increases plaque accumulation and result in periodontal disease. But there have not been many reports of instrumentations on the artificial crown so far. Therefore this study is conducted to evaluate the effects of various repeated instrumentations on the porcelain crown marginal portion. Of the 10 extracted periodontally diseased maxillary first premolars, were 12 proximal surface used in this study. The finishing line of the preparation was placed on the root surface below CEJ and then the crown was cast and cemented in usual manner. Every 4 surfaces of the 3 instruments-curet, ultrasonic scaler, and ultrasonic curet- is used. and four samples used in each instruments. The relevant procedures and measurements were repeated 3 times in each surfaces. Marginal gap is measured by the microscope and surface roughness, Scannig Probe Microscope. Measurements are made at 5 points in each surfaces, making 20 points in each instrument. The results evaluated statistically were as follows 1. As instrumentation was repeated, both marginal gap and roughness were increased in all group 2. In the hand curet, marginal gap was increased every instrumentation and roughness was increased after second. 3. In the ultrasonic scaler, both marginal gap and roughness were increased every instrumentation. 4. In the ultrasonic curet, marginal gap was increased after third instrumentation and roughness was increased after second. 5. Marginal gap and roughness used by the ultrasonic curet were lower than the others and no difference was seen between the hand curet and ultrasonic scaler From the results of this study, the ultrasonic curet was useful in some aspect, but careful instrumentation was needed. Furthermore it was important to minimize the instrumentation through complete periodontal therapy before setting and adequate plaque control.

• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.179-185
• /
• 2018

Background: We analyzed the angle between the glenoid anterior surface and glenoid axis, the range of the glenoid apex and the location of the glenoid apex for assistance during shoulder surgery. Methods: Sixty-two patients underwent a computed tomography of the shoulder with a proximal humerus fracture. In the range of the glenoid apex, the ratios of the distribution of triangles with a Constant anterior and posterior area of the glenoid were measured. The location of glenoid apex was confirmed as the percentage of the position with respect to the upper part of the glenoid with the center of the part, analyzed the angle between the glenoid anterior surface and glenoid axis was measured. Results: The angle between the glenoid anterior surface and glenoid axis was $19.80^{\circ}{\pm}3.88^{\circ}$. The location of the glenoid apex is $60.36%{\pm}9.31%$, with the upper end of the glenoid as the reference. The range of the glenoid apex was $21.16%{\pm}4.98%$. When the height of the glenoid becomes smaller, the range of the glenoid apex tends to become larger (p=0.001) and the range of the glenoid apex becomes wider (p=0.001) as the glenoid width narrows. Conclusions: We believe the anatomical measurements of the glenoid will be helpful for a more accurate insertion in glenoid component. It is thought that more accurate insertion is possible if we can set other anatomical measurements using computed tomography imaging of the glenoid which can develop into the study of other anatomical measurements.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.71-83
• /
• 2001

The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).

• 대한소아치과학회지
• /
• 제37권2호
• /
• pp.159-167
• /
• 2010

유치열에 존재하는 우식패턴을 연구하기 위하여 유치열을 가진 유아들을 대상으로 치면별 우식경험도 조사를 실시하고 군 집분석과 다차원척도분석을 실시하였다. 연구대상은 36개월 이상 71개월 이하의 어린이 815명이었다. 군집분석에서 먼저 분리된 네 개의 군집은, 유치는 (1) 유구치, (2) 상악 유절치, (3) 하악 제1유구치, (4) 상악 제1유구치, 유치면은 (1) 하악 유구치 교합면과 상악 제2유구치 교합면, (2) 상악 유중절치 근심면, (3) 하악 제1유구치 교합면, (4) 상하악 제2유구치 교 합면의 분리, 유치면군은 (1) 상악 유전치 인접면, (2) 하악 유구치 교합면, (3) 상악 유전치 협설면, (4) 상악 유구치 협설 면, 인접면, 교합면 및 하악 유구치 협설면과 인접면이었다. 다차원척도분석에서 상호간에 가장 멀리 떨어진 순서로 보았을 때, 유치는 하악 제1유구치, 상악 제1유구치, 상악 유중절치, 상악 유측절치, 하악 제2유구치, 상악 제2유구치, 기타 유치(유견치, 하악 유절치)로 나눌 수 있었고, 유치면은 하악 유구치 교합면, 상악 유중절치 근심면, 상악 유구치 교합면, 기타 유치 면으로 나눌 수 있었으며, 유치면군은 상악 유전치 인접면, 상악 유전치 협설면, 하악 유구치 교합면, 기타 유치면군으로 나눌 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제30권2호
• /
• pp.112-120
• /
• 2005

본 연구에서는 수복면의 위치와 와동의 크기에 따른 미세누출도의 차이를 확인하기 위해 3차원 재구성법에 의한 색소침투량과 주사전자현미경 검경을 통한 변연틈새의 비율을 측정하였다. 32개의 건전한 대구치의 협/설면과 인접면에 각기 $2\;{\times}\;2\;{\times}\;1.5\;mm$의 작은 와동과 $4\;{\times}\;2\;{\times}\;1.5\;mm$크기의 큰 5급 와동을 형성 한 다음, 자가부식형 접착시스템으로 치면 처리하고 혼합형 복합레진인 Esthet X로 단일 충전하였다. 5도와 55도 사이에서 1000회의 열순환을 시킨 다음, 레진 복제물을 제작하고 SEM 검경을 통해 전체 변연길이에 대한 변연틈새의 비율을 측정하였다. 또한 열순환된 치아에 $50\%$ 질산은 용액으로 색소를 침투시킨 후 자가중합형 레진에 포매하여 0.25 mm두께의 간격으로 연속적으로 갈아내면서 각각의 단면상을 채득하였다. 각 단면상을 3차원으로 재구성하여 미세누출도를 정량적으로 평가하였다. 3차원 색소 침투량의 유의성 검정에는 Two-way ANOVA와 independent T-test를, 변연틈새의 비율에는 Mann-Whitney U test를 사용하였으며 , 두 방법 사이의 Spearman's rho test로 평가하여 다음과 같은 결과를 얻었다. 1 미세누출도는 수복면의 위치와 와동의 크기에 의해 영향을 받았다. 즉 협/설면과 작은 와동보다는 인접면과 큰 와동에서 더 많은 미세누출을 보였다. 2. 두 방법 사이에는 높은 상관 관계를 보였다 (상관계수 = 0.614/P= 0.000). 이상의 연구 결과로 볼 때, 협/설면과 작은 와동의 수복물보다는 인접면과 큰 와동의 수복물에서 더 많은 미세누출을 보였으므로, 불필요한 치질 삭제를 줄임으로써 변연부의 노출이 커지는 것을 막아야 할 것이다.n-St/SS 군에서는 비표준화 medium 규격 master cone과 스테인레스 스틸 spreader를, 그리고 Non-St/NT 군에서는 비표준화 medium 크기 master cone과 니켈-티타늄 finger spreader를 각각 사용하였다. 충전된 근관은 $37^{\circ}C$, 상대습도 $100\%$하에서 24시간 보관한 후, 치근단 1, 3및 5 mm수준에서 횡절단하여 입체현미경 하에서 관찰하고 컴퓨터에 저장한 다음, $Auto^{(R)}$CAD 2000 프로그램을 이용하여, 형성된 근관 및 gutta-percha 충전물의 외형을 추적하여 근관내 gutta-percha 면적비를 계산하였다. Gutta-percha 면적비의 결과치는 two-way ANOVA를, 그리고 accessory cone 수는 one-way ANOVA 및 Duncan's multiple range test를 이용하여 통계 분석하여 다음과 같은 결과를 얻었다. 스테인레스 스틸 finger spreader를 사용한 경우 및 니켈-티타늄 finger spreader를 사용한 경우 공히, 모든 치근단 수준에서 비표준화 medium 크기 master cone 사용군이 ISO 표준화 규격의 master cone 사용군에 비해 유의하게 높은 gutta-percha 면적비를 나타내었다 (p < 0.01). 비표준화 medium크기 master cone 사용군에서는 표준화 규격의 master cone 사용군에 비해 유의하게 적은 수의 accessory cone이 사용되었다 (p < 0.01). 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulcorner}$적당하다${\lrcorner}$고 응답한 경우가 가장 많이 이러한 음식을 즐겨 먹었으며(49.5%), 그

• The Journal of Korean Physical Therapy
• /
• 제17권1호
• /
• pp.108-122
• /
• 2005

The gait training strategy in very important things for central nervous system(CNS) injury patients. There are many method and strategy for regaining of the gait who had CNS injury. A human being has central pattern generator(CPG) is spinal CPG for locomotion. It is a neural network which make the cyclical patterns and rhythmical activities for walking. Sensory input from loading and hip position is essential for CPG stimulation that makes the central neural rhythm and pattern generating structure. From sensory input, the proprioceptive information facilitate proximal muscles that controlled in voluntarily from cortical level and visual and / or acoustical information facilitate distal muscles that controlled voluntarily from subcortical level. Gait training method can classify that is functional level and structural level. Functional level includ level surface gait, going up and down the stair. It is important to facilitate a guide tempo in order to activate the central pattern generators. During the functional test or functional activities, can point out the poor period in gait that have to be facilitate in structural level. There are many access methods with patient position and potentiality. The methods are using of rhythmic initiation, replication and combination of isotonic with standing position. Clinically using it on weight transfer onto the stance leg, loading response, loading response and pre-swing, terminal stance, up and downwards stairs.

• 대한의생명과학회지
• /
• 제12권1호
• /
• pp.43-48
• /
• 2006

Present study aimed to investigate recovering effect of propolis on blood components and tissues of mouse after low dose irradiation. It is verified that the contents of Fe, Mg, P, Zn and Cu in propolis dosed blood are increased slightly than irradiated blood, however, the contents of Ba and Pb are decreased to one tenth than irradiated blood and the contents of Fe and P are increased to 10% than control group. We consider this result as the propolis acts a role of defence factor minimizing changes of elements caused by irradiation in blood. Among the blood components, Glutamate oxaloacetate transaminase (GOT) value is increased after the radiation but after dosed with propolis and irradiated the value is decreased, suggesting that propolis as a buffering material against irradiation. After dosed with propolis, a number of spermatogenic cells are lowered in testis tissue, however, nucleus and cytoplasm are clearly observed in spermatogonia, spermatocytes and spermatid cells. And nucleus and membrane of cells in the proximal convoluted tubule of renal tissue are clearly observed. Also, cytoplasmand membrane of surface mucous cells in stomach tissue are appeared in normal which is almost like those of control group. We consider that the propolis used in this study is preventing deformations of cells increasing resistance capacity against irradiation rather than recovering damaged tissues.

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.9-15
• /
• 2008

An investigation was carried out to examine the pores of casting bodies depending on the position of wax pattern in the ring for precious alloy by optical micrographs. From the result of optical micrographs, many pores were found in the Group C that wax pattern is placed in the center of the ring. However, any pores were scarcely found in the Group A, B, D and E that wax patterns are placed out of the center of thermal zone. In comparison with the pores of casting bodies of Group C, many pores were found at the cusp area rather than at the proximal surface. From these examination, it was concluded that wax pattern should be placed out of the center of thermal zone to prevent casting boies from occurring pores.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.205-217
• /
• 2014

Purpose: This study will examine the differences among the college dental morphology textbooks in light of their contents and learning objectives through which we will propose an optimal way of consolidating those differences found. Methods: Five college textbooks adopted in the dental related departments were selected by random and the overview and subdivisions of contents were compared and closely analysed with regards to the learning objectives. Results: Firstly, all of the dental morphology textbooks cover the learning objectives of the dental morphology subject, especially in the area of the overview of dental morphology, the permanent tooth, deciduous tooth. Only the dentistry textbooks explain the learning objective of the occlusion. Secondly, differences in content were found in the area of component tissue and around tissue, dental formula of deciduous teeth, spinous process, buccal pit, enamel projection, curve symbol, tip of cusp position of proximal surface of permanent mandibular canines, buccal cusp position of permanent mandibular second premolars. Conclusion: It is imperative to delineate some meaningful and critical differences in contents among the dental morphology textbooks and reflect this to each and every textbook to be published as a supplementary information guide or index.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.