• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.899-915
• /
• 2018

In this study, in order to construct an eco-friendly advanced road transportation network, the multi-layer tunnel, which is a small-sized car road, is designed to have a height of less than 60 cm. However, the shape of the tunnel is low and the height of the traffic sign is small. In order to solve these problems, traffic sign characters were designed in three dimensions, and the possibility of applying the design of the three - dimensional sign that can obtain greater visibility than the existing signs at the same distance and the possibility verification through virtual simulation were performed. The three-dimensional sign is horizontally installed on the ceiling of the multi-layer tunnel. To be seen vertically, it is enlarged by a certain ratio by the perspective, and the width and height are enlarged. Respectively. In addition, 3D simulation was performed to verify the visibility of the stereoscopic signs when the driver ran through the stereoscopic sign design specifications. As a result of the design and experimental study, it was confirmed that the stereoscopic sign could be designed through the theoretical formula and that it could provide the driver with a larger traffic sign character because there is no limitation of the facility limit compared to the existing vertical traffic sign. Also, we confirmed that it can be implemented in the side wall by using the stereoscopic sign design principle installed on the ceiling part. It was confirmed that the design of the stereoscopic sign can be designed to be smaller as the distance that the driver visually recognizes the sperm is shorter, the height of the protrusion vertically at the lower part of the stereoscopic sign becomes higher. As a result of 3D simulation running experiment based on the design information of the stereoscopic sign, it was confirmed that the stereoscopic sign is visually the same as the vertical sign at the planned distance. Although the detailed research and institutional improvement of stereoscopic signs have not been made in Korea and abroad, it is evolved into a core technology of new road traffic facilities through various studies through the possibility of designing and applying stereoscopic signs developed through this study Expect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.392-400
• /
• 2011

Purpose: Cleft lip and palate is one of the most frequent hereditary deformities of the maxillofacial region which can arise in facial and jaw abnormalities as well as malocclusion and speech problems. In particular, unilateral cleft lip and palate is characterized by midface deformity resulting in maxillary anterior nasal septal deviation and nasal deformity. The aim of this study is to analyze the facial deformity of untreated unilateral cleft lip patients for contribution to primary cheiloplasty. Methods: Thirty-three patients with unilateral cleft lip and palate were impressioned before operation and facial casts were made. The casts were classified into complete cleft lip and incomplete cleft lip groups and each group were classified into affected side and normal side. Anthropometric reference points and lines were setted up and analysis between points and lines were made. Results and Conclusion: The obtained results were as follows: 1. The intercanthal width had no significant difference between the incomplete and complete cleft lip groups. 2. Cleft width and alar base width were greater in the complete group, and nasal tip protrusion was greater in the incomplete group. 3. Involved alar width and nostril width were greater in the complete group and in both complete and incomplete groups, involved alar width and nostril width were greater than the non-involved side. 4. The lateral deviation of the subnasale was greater in the complete group in both involved and non-involved sides. 5. The nasal laterale was placed inferiorly in both cleft groups. 6. The subnasale was deviated to the non-involved side in both cleft groups. 7. The nose tip was deviated to the non-involved side in both cleft groups and had greater lateral deviation in the complete cleft group. 8. The midpoint of cupid's bow had no vertical difference between complete and incomplete groups, but had a greater lateral deviation in the complete group. 9. In the complete cleft group, correlation between differences in cleft width and nostril width and columella height difference were obtained.

• Archives of Plastic Surgery
• /
• v.35 no.2
• /
• pp.139-146
• /
• 2008

Purpose: The objective of this study is anthropometric analysis of mouth and lower face of Korean. The relationship of soft-tissue to underlying bony structures determine the overall aesthetics of the face. The goal of aesthetic surgery of the face is to achieve the ideal normal and enhance the aging face. The purpose of present study was to determine the change of the morphology of the mouth and lower face based on soft-tissue landmarks according to age group to facilitate prediction during aesthetic surgery. Methods: The standardized photographs of 2,018 healthy volunteers(18 to 79 years of age; 1,070 males, 948 females) were investigated. Age groups were classified into young, middle-aged, and elderly groups. Five and seven items were measured on frontal and lateral view photographs, respectively. Individual dimensions were compared in the three age groups and between males and females. Results: The width of mouth is 4.5 times larger than that of philtrum. Most of measured data decreased with age. However, woman's lip width of the mouth somewhat increased from the young to elderly. The width of lower face is 2.5 times larger than mouth in young age group and increased slightly from the young to middle-aged and thereafter slightly decreased to elderly group. Upper lip was more higher than lower lip and male lip was more higher than female. But male and female lip height is similar at old age. Conclusion: Most of Koreans showed prominent lower face because of the development or protrusion of the mandible. And the descent of soft-tissue around the mouth was one of the significant characteristics of senile change. The posterior retrusion of the subnasal was an another characteristic. This study will help to elucidate the age-related dimensional differences of the human being and to provide useful information for clinical applications in oral and aesthetic surgery.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.434-441
• /
• 2006

Objective: While one of the most prevailing motivations for seeking orthodontic treatment is to achieve good facial esthetics, understanding the level of a person's perception to the changes that have occurred on the face after orthodontic treatment is critical to the process of orthodontic diagnosis and treatment planning. Methods: 40 students attending art school participated in determining the level of their perception of changed lip position and facial asymmetry. Computer-graphic frontal face and facial profile photographs with balanced proportions were used to evaluate the level of a participant's perception of the changes in facia! asymmetry and in lip position. Results: Change of lip position over 2 mm and over a 3 mm change of facial asymmetry was perceived significantly. Conclusion: The results indicated that at least a 2 mm change of lip position was needed to be perceived after orthodontic treatment. The level of perception of the change in facial asymmetry was lower than that of the change in lip position. Information about facial changes given prior to the evaluation enhanced the level of perception.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3192-3202
• /
• 2014

This study has its purposes on analyzing specific features of the elements according to scales of 32 main buddhist sancta among wooden temples with gable roof that are nationally designated as cultural assets, and analyzing influences and proportional relations between main and submaterials, so that it could be basic and objective data for restore and repair cultural assets in the future. Results of the study are following. First of all, the average plane proportion of doritong (facade) and yangtong (side) in 3-room building is about 1.31:1, while it is 1.70:1 in 5-room building. Secondly, as a result of analyzing the locational proportion and thickness of pillars at each location, floor room turned out to have wider space between pillars than that of edge room or side room in both cases of 3 and 5-room buildings. In the mean time, for the average thickness of the pillars in 3-room building, it was 491mm for corner pillars, 433mm for general pillars in cases of 3-room building, while it was 595 and 511mm respectively in cases of 5-room building. The reason why corner pillars are 60~80mm thicker than general ones in average, is determined to considered structural stability and optical illusion. For the third, as a result of analyzing the influences on pillar thickness, eaves projection and eaves height according to the scale(dimension) of buildings, 3-room buildings have outstanding correlation as its scale(dimension) goes bigger, while 5-room ones are not very much influenced by its scale(dimension). For the fourth, as a result of the relation between pillars and eaves, both of 3 and 5-room buildings have longer-projected and higher eaves as their pillars go taller; especially height of eaves turns out to have very close relation between length of pillars. In addition to that, both of 3 and 5-room buildings have much projected eaves as the eaves go higher.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.29-35
• /
• 2012

Purpose: The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. Materials and methods: The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the $37^{\circ}C$ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. Results: The mean maximum temperature was measured more than $47^{\circ}C$ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). Conclusion: The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.375-401
• /
• 1995

Cause of skeletal Class III malocclusion in growing patients can be classified into maxillary deficiency, mandibular overgrowth, and combination of the two. Use of Protraction Head Gear(P.H.G.) has been recommended for treatment of growing Class III malocclusion patients, for it results in forward & downward movement of maxilla and backward & downward rotation of mandible. Numerous animal experiments were performed and clinical study data have been reported ; nevertheless, studies on soft tissue profile change and comparison of treatment effects among the patients who had undergone treatment are considered to be somewhat insufficient. The author selected 93 patients, who had been diagnosed as skeletal Class III malocclusion with maxillary deficiency and then treated with P.H.G. ; the sample group was divided according to sex, treatment beginning age, palatal suture opening(intraoral appliance), and facial growth pattern. For each group, changing patterns of hard and soft tissue profile observed, and comparision with 20 normal group(Angle's Class I) patients of statistical significance in amount of growth and treatment of hard and soft tissue was done. The following results were obtained. 1. Skeletal, dental, and soft tissue measurements indicated that more growth changes was induced in the sample group that used P.H.G. compared to the growth amount of normal group. 2. No statistical significance was observed in the amounts of maxillary forward movement and mandibular backward & downward rotation depending on treatment beginning age in both sex group. 3. R.P.E. showed more significant maxillary forward movement and less protrusion of upper incisor than La-Li. 4. There was no statistical significance in the amount of maxillary forward movement depending on facial growth pattern. On the other hand, measurements indicating mandibular downward & backward rotation indicated greater change in counterclockwise growth pattern group than the clockwise. 5. Changes in upper and lower lip thicknesses showed a close relationship with positional changes in underlying bone tissue and upper and lower teeth, and upper lip height and nasolabial angle increased and mentolabial angle decreased.