• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.107-112
• /
• 2005

In this study, the dynamic analysis is performed fur predicting the transmitted force to flexible human body induced by prototype HIF(High Impulsive force) device operation, which is partially assembled by major parts. A beam-mass model and a shear-structure model are used for the flexible mount structure and their dynamic behavior are investigated by experimental results under rigid/flexible mount conditions using a general purpose device. From the test result of prototype device in rigid mount condition, the transmitted force to human body which can not be measured directly, is estimated based on the proved mount structure model.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.47-57
• /
• 1999

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for several decades. The parameters that affect the similitude between the model and prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. The simple beams which have the lap splice at the midspan were made and flexural tests were performed under two-point loading. The length of lap splice are varied from 0.4ld through 0.7ld and up to 1.0ld where ld is the development length of the reinforcement. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests and the test results are compared from the viewpoint of similitude.

• 항공우주기술
• /
• 제4권1호
• /
• pp.203-210
• /
• 2005

KSLV-I에 탑재를 위한 주 데이터 장치(MDU)의 초기개발모델이 제작되었으며 인터페이스시험이 수행되었다. MDU의 엔지니어링 및 비행모델 제작을 수행하기 이전에 MDU 초기 모델에 대한 발사체 탑재 가용성을 확인하기 위하여 신뢰도 예측을 수행하였다. 본 논문은 전장품의 신뢰도 예측에 활용되는 MIL-HDBK-217F를 근간으로 MDU 개발 모델의 신뢰도 예측 방법에 대해 기술하였으며 신뢰도 예측결과를 기술하고 있다.

• 한국압력기기공학회 논문집
• /
• 제19권1호
• /
• pp.1-5
• /
• 2023

This paper describes a newly-developed analysis methodology in comprehensive vibration assessment program (CVAP) of reactor internals to develop a valid-prototype for the design of nuclear power plants. The new analysis methodology developed in this study will be confirmed through a scale model testing (SMT). Based on the measurements obtained from dynamic pressure transducers in the SMT, a new non-dimensional equation is developed to apply the forcing functions at reactor internals for the prototype. In addition to the new non-dimensional equation, a computational fluid dynamics(CFD) is used to develop the application of the hydraulic loads at reactor internals for the prototype.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.917-920
• /
• 1995

A mathematical model describing the relationship between longitudinal tension and tangential velocity of web/roller in a multi-span web transport system has been developed. An experiment was carried out for typical conditions to validate the mathematical model for tension behavior in a multispan system. A two-span prototype prototype web transport system with winder and unwinder was manufactured for the experiment. By comparing simulation and experimental results, the mathematical model for tension and velocity in a multi-span web transport system is confirmed to be valid for typical conditions. Tension transfer phenomenon was also confirmed though the simulation as well as experimentation.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.95-104
• /
• 2010

One of 21st century's main paradigms is a 'Culture', and people started to express their 'cultural desires and demands' regarding public environments. Accordingly central and local governments are paying attention to these demands from their citizens and trying to establish the policies to meet these needs. This research is done to suggest the strategy programming model to support the executions of culture-centered public designs which are based on the local resources and identities. The entire research contains three sub-topics. First topic is setting the prototype phases of strategy programming. Second topic is analyzing the associated indices for each prototype phase. Third topic is suggesting Matrix Model in which the prototype phases and their associated indices are linked. Among three topics, this paper deals with the first one - the prototype phases of strategy programming. It studies this subject in relation with Place Marketing which emphasizes the local resources and identities. The prototype phases are comprised of 3 steps for Place Strategy and 4 steps for Marketing Strategy. Place Strategy should be considered prior to Marketing Strategy because in culture-centered public design, locality has priority over other concerns. The phases for Place Strategy includes 'Resource_analyzing of local resources', 'Mission_setting a purpose', and 'Targeting_segmenting target groups'. The phases for Marketing Strategy involves 'Organization_instituting the main body and/or partnership', 'Image Positioning_setting an unique local image', 'Point_realizing the product', and 'Channel_deciding the sales promotion tools'.

• 한국도서관정보학회지
• /
• 제47권1호
• /
• pp.175-198
• /
• 2016

이 연구의 목적은 어린이, 특히 디지털 네이티브(digital native) 세대로 간주되는 디지털 키즈(digital kids)에게 적합한 OPAC 프로토타입(prototype)을 실험적으로 구현해 보는데 있다. 이러한 목적을 위해 이 연구에서는 본격적인 시스템의 개발에 앞서 시스템의 모형을 간단히 만들어 보는 프로토타이핑(prototyping) 기법을 적용하여 연구를 수행하였다. 프로토타입의 개발 대상은 초등학교 4~5학년생으로 선정하였으며, 연구는 다음과 같은 과정으로 진행하였다: (1) 요구분석에 근거하여 논리적 모델을 설계하고, (2) 논리적 모델에 따라 OPAC 프로토타입을 개발한 다음, (3) 프로토타입에 대한 사용성 평가를 실시하였다. 이어, (4) 사용성 평가의 결과를 토대로 하여 향후 디지털 키즈를 위한 OPAC의 개발 전략에 대해 제언하였다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1748-1753
• /
• 2003

This paper describes the forming of fine gear housing using RP system. In order to apply 3D model formed through CAD software to RP system, it is necessary of transforming 3D model into STL file format. Besides, when the same shape is formed repetitively, we must solve the program that the shape accuracy of prototype is irregular. Therefore, we will make an experiment on influence of 3D model, file transformation and prototype on facetres, AutoCAD system value. On the basis of experimental result, we will develop an automatic file transformation program for RP. In the final process, we will manufacture on a better prototype according to the experiment result of fine gear housing.

• 전산구조공학
• /
• 제10권2호
• /
• pp.273-281
• /
• 1997

대량의 복잡한 비선형적인 관계도 단순화의 과정 없이 연관 관계를 자체 조직화 할 수 있는 인간의 뇌와 가장 유사한 병렬 연산 모델인 인공 신경 회로망을 구조 해석 분야에 도입하였다. 본 논문은 스터브 거더의 거동 예측을 위한 신경망 근사해석 모델 개발을 궁극적인 목적으로 하는 기초적 연구로서, 단순 보의 처짐 문제와 같은 정확해를 구할 수 있는 문제로부터 신경망 근사해석모델의 원형 (prototype)을 제시하고 검증하는데 목적이 있다.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.71-78
• /
• 2001

조선분야에서 CNC, 혹은 CAM이 사용되는 분야는 주로 강재 절단, 프로펠러 제작 자동화와 수조 실험용 모델제작에 관한 것이며 대학에서는 대부분 선형과 구조 설계용 CAD 연구를 수행하고 있고 CAM 분야는 활성화되어 있지 않은 편이다. 본 문에서는 Pro/Engineer CAD 시스템으로 3차원 선체 형상을 모델링 하고 이를 CNC 공작기계로 제작하는 과정을 수행하고 부수적으로 이기종 소프트웨어간 데이터 교환을 위한 중립 데이터 양식에 관한 기초 조사연구도 하였다. CIM 과정에서 소프트웨어간의 형상 정보 교환 시 IGES, STEP을 사용할 수 있으나 본 연구에 적용된 CAM s/w에서 STEP을 인식할 수 없어 IGES를 사용하였고 TRIMC VMC 공작기계의 제작물 크기에 제한이 있어 작은 규모의 선박 모형(prototype) 가공을 수행하였다.