• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.30-33
• /
• 2016

다중 서버 환경에서 파일전송 프로토콜들이 혼용되어 사용되면서 프로토콜 간의 연동이 원활하지 않으며, 파일 송수신 로그 관리의 부재로 생기는 버전 관리의 문제점이 있다. 따라서 본 논문에서는 FTP(File Transfer Protocol) 어댑터를 이용하여 다중프로토콜 연동을 해결하고, 파일 송수신 로그를 관리하는 파일 버전 모니터링 시스템을 구현하고자 한다. 각 서버에서는 어댑터를 통해 중앙서버로부터 각 서버의 가용 프로토콜 정보를 받아 프로토콜 혼용 문제를 해결하고, 파일 송수신 로그를 중앙서버로 송신하여 파일 버전 관리의 문제를 해결한다. 본 시스템을 통해 프로토콜의 연동과 파일 송수신 로그를 관리함으로써 서버의 효율적인 관리를 할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권2호
• /
• pp.529-546
• /
• 2012

To address the need for autonomous control of remote and distributed mobile systems, Machine-to-Machine (M2M) communications are rapidly gaining attention from both academia and industry. M2M communications have recently been deployed in smart grid, home networking, health care, and vehicular networking environments. This paper focuses on M2M communications in the vehicular networking context and investigates areas where M2M principles can improve vehicular networking. Since connected vehicles are essentially a network of machines that are communicating, preferably autonomously, vehicular networks can benefit a lot from M2M communications support. The M2M paradigm enhances vehicular networking by supporting large-scale deployment of devices, cross-platform networking, autonomous monitoring and control, visualization of the system and measurements, and security. We also present some of the challenges that still need to be addressed to fully enable M2M support in the vehicular networking environment. Of these, component standardization and data security management are considered to be the most significant challenges.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권1호
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• 대한임베디드공학회논문지
• /
• 제15권2호
• /
• pp.79-85
• /
• 2020

IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.87-96
• /
• 2006

무선 센서 네트워크는 다양한 분야에서 연구되고 있다. 그 중 해양 센서 네트워크는 해양 환경 감시와 같은 다양한 목적으로 사용 될 수 있다. 그러나 무선 센서 네트워크는 주로 지상에서 연구된다. 기존에 지상에서의 연구는 해양에 적용하기에 부적합하다. 따라서, 해양 환경을 고려한 해양 센서 네트워크 구조를 제안한다. 본 논문에서는 해양 센서 네트워크에 클러스터링 기법과 기능별 노드 구축을 적용하였다. 각 클러스터는 클러스터 데이터를 수집하여 전송한다. 이중의 슈퍼 클러스터 헤드는 각각 수신한 클러스터 데이터를 베이스 스테이션에 전송한다. 제안한 해양 음파 센서 네트워크 라우팅 알고리즘을 구현하고, 테스트 베드를 구축하여 클러스터 데이터의 수신율을 분석한다.

• Clinical and Experimental Pediatrics
• /
• 제59권9호
• /
• pp.347-354
• /
• 2016

An apparent life-threatening event (ALTE) is defined as the combination of clinical presentations such as apnea, marked change in skin and muscle tone, gagging, or choking. It is a frightening event, and it predominantly occurs during infancy at a mean age of 1-3 months. The causes of ALTE are categorized into problems that are: gastrointestinal (50%), neurological (30%), respiratory (20%), cardiovascular (5%), metabolic and endocrine (2%-5%), or others such as child abuse. Up to 50% of ALTEs are idiopathic, where the cause cannot be diagnosed. Infants with an ALTE are often asymptomatic at hospital and there is no standard workup protocol for ALTE. Therefore, a detailed initial history and physical examination are important to determine the extent of the medical evaluation and treatment. Regardless of the cause of an ALTE, all infants with an ALTE should require hospitalization and continuous cardiorespiratory monitoring and evaluation for at least 24 hours. The natural course of ALTEs has seemed benign, and the outcome is generally associated with the affected infants' underlying disease. In conclusion, systemic diagnostic evaluation and adequate treatment increases the survival and quality of life for most affected infants.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.129-131
• /
• 1993

A transcutaneoos information transmission system using transmitted infrared light for an implantable total artificial heart(TAH) an developed and the performance of the system was tested. In an in vitro test, transmittance of the developed system was measured through various thicknesses of pig shins. In an in vivo test, a loopback test using a personal computer was performed to determine the error rate and an experiment using a mock system was taken. In this experiment, within acceptable lateral and vertical displacements, the error rate of at least 3.8E-6 was guaranteed. Monitoring signals from the internal controller(Intel 87C196) of the mock system were successfully transmitted to the external controller(IBM PC) and the operating commands from the external controller were successfully conducted by the mock system. Communication was done in half duplex mode according to RS-232 protocol at the speed of 4800 bps.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.221-227
• /
• 2013

본 논문에서는 제로 에너지 하우스의 에너지 절감을 모니터링하기 위하여 Zigbee 통신을 이용한 온 습도, 연기감지, 조도 및 CO2의 복합 센서 보드를 개발하고 이를 처리하는 프로토콜 등에 관하여 다루었다. 특히 센서를 장착시키는 실내 공간의 위치에 따라 제어하는 알고리즘이 달라지게 되므로 이를 무선인 Zigbee를 통하여 센서 장착 위치를 자유롭게 변경할 수 있다는 장점이 있으며. 또한 창을 통해 발생하는 에너지 손실을 줄일 수 있고 실내의 조명 제어에도 중요한 역할을 할 수 있는 시스템이다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.811-818
• /
• 2016

This paper suggests a structure of power control system in floating wave-offshore wind hybrid power generation system. We have developed an unified SCADA(Supervisory Control and Data Acquisition) system which can be used to monitor and control PCS(Power Conversion System) based on IEC61850. The SCADA system is essential to perform the algorithm like proportional distribution and data acquisition, monitoring, active power, reactive power control in hybrid power generation system. IEC61850 is an international standard for electrical substation automation systems. It was made to compensate the limitations of the legacy industrial protocols such as Modbus. In order to test the proposed SCADA system and algorithm, we have developed the wind-wave simulator based Modbus. We have designed a protocol conversion device based on real-time Linux for the communication between Modbus and IEC61850. In this study, SCADA system consists of four 3MW class wind turbines and twenty-four 100kW class wave force generator.

• 융합보안논문지
• /
• 제13권6호
• /
• pp.11-16
• /
• 2013

이동 노드는 임의로 이동을 하며, 라우터와 호스트 기능을 동시에 수행해야 한다. 노드들의 이러한 특성은 다양한 공격의 잠재적 위협 요소가 되고 있다. 특히 그중에서도 악의적인 노드가 패킷 손실을 유발시키는 블랙 홀 공격은 가장 중요한 문제 중에 하나이다. 본 논문에서는 블랙 홀 공격의 효율적인 탐지를 위하여 모든 노드에서 감시 테이블을 이용한 분산적 탐지와 클러스터를 기반으로 한 협업 탐지 기법을 제안하였다. 제안하는 기법에서는 공격 탐지의 정확도를 향상시키기 위하여 4단계의 과정으로 이루어진 로컬 탐지와 협업 탐지 과정으로 나누어 수행한다. 협업 탐지를 위해 클러스터 헤드는 블랙 홀 리스트를 이용하였다. Ns-2 시뮬레이터를 이용하여 제안한 기법의 성능을 평가하였으며, 실험결과에서 제안한 기법의 우수한 성능을 확인할 수 있었다.