• 전기학회논문지P
• /
• 제62권1호
• /
• pp.23-29
• /
• 2013

TCN(train communication network) standard was approved in 1999 by the IEC (IEC 61375-1) and IEEE (IEEE 1473-T) organizations to warrant a reliable train and equipment interoperability. TCN defines the set of communication vehicle buses and train buses. The MVB(multifunction vehicle bus) defines the data communication interface of equipment located in a vehicle and the WTB(wire train bus) defines the data communication interface between vehicles. The WTB and each MVB will be connected over a node acting as gateway. Also, to support applications demanding a high reliability, the standard defines a redundancy scheme in which the bus may be double-line and redundant-node implemented. In this paper we have presented protocol analysis platform for the WTB redundancy which is part of TCN system, to verify communication state of high-speed trains. As a confirmation of its validity, the technology described in this paper has been successfully applied to state monitoring and protocol verification of redundancy WTB based on TCN.

• 한국통신학회논문지
• /
• 제35권8A호
• /
• pp.810-819
• /
• 2010

본 논문에서는 환경 감시 등 무선 센서네트워크 응용을 위한 LEACH 프로토콜 기반의 망 수명 개선 알고리즘을 제안한다. 첫 째, LEACH 프로토콜에 따른 클러스터 구성시 각 클러스터에 노드 수를 균등하게 배분한다. 둘째, 클러스터 형성시 각 클러스터별로 헤더 역할을 담당할 노드의 순서를 설정한다. 이후, 정해진 순서에 따라 헤더가 일정 수의 패킷을 수신후 다음 노드에게 헤더 역할을 양도한다. 이렇게 함으로써 각 노드의 에너지 소비를 균등하게 하여 망 전체의 수명이 증대되도록 하였다. 시뮬레이션 결과 망 수명은 LEACH에 비해 두 배 증가하였고 망 전체의 에너지 소비는 1/4로 감소됨을 보여주었다.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.475-479
• /
• 2009

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Current research activity for the Minimum Energy Multicast (MEM) problem has been focused on devising efficient centralized greedy algorithms for static ad hoc networks. In this paper, we consider mobile ad hoc networks(MANETs) that could provide the reliable monitoring and control of a variety of environments for remote place. Mobility of MANET would require the topology change frequently compared with a static network. To improve the routing protocol in MANET, energy efficient routing protocol would be required as well as considering the mobility would be needed. In this paper, we propose a new method, the CACH(Context-aware Clustering Hierarchy) algorithm, a hybrid and clustering-based protocol that could analyze the link cost from a source node to a destination node. The proposed analysis could help in defining the optimum depth of hierarchy architecture CACH utilize. The proposed CACH could use localized condition to enable adaptation and robustness for dynamic network topology protocol and this provide that our hierarchy to be resilient. As a result, our simulation results would show that CACH could find energy efficient depth of hierarchy of a cluster.

• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1159-1165
• /
• 2016

Traffic violations such as moving while the traffic lights are red have come from a simple omission to a premeditated act. The traffic control center cannot timely monitor all the cameras installed on the roads to trace and pursue those traffic violators. Modern vehicles are equipped and controlled by several sensors in order to support monitoring and reporting those kind of behaviors which some time end up in severe causalities. However, such applications within the vehicle environment need to provide security guaranties. In this paper, we address the limitation of previous work and present a secure and privacy preserving protocol for traffic violation reporting system in vehicular cloud environment which enables the vehicles to report the traffic violators, thus the roadside clouds collect those information which can be used as evidence to pursue the traffic violators. Particularly, we provide the unlinkability security property within the proposed protocol which also offers lightweight computational overhead compared to previous protocol. We consider the concept of conditional privacy preserving authentication without pairing operations to provide security and privacy for the reporting vehicles.

• 한국전자통신학회논문지
• /
• 제4권1호
• /
• pp.14-19
• /
• 2009

노드의 이동성과 한정된 배터리 용량으로 무선애드혹 네트워크에서는 종종 경로 단절이나 패킷 손실이 발생한다. 본 논문에서는 수신 신호 세기의 변화를 측정함으로써 경로 단절 확률과 패킷손실을 줄일 수 있는 AODV (Ad hoc On-demand Distance Vector routing)에 기반을 둔 향상된 라우팅 프로토콜을 제안한다. 라우팅을 결정하기 위해 노드 이동성과 경로의 홉으로 이루어진 새로운 측정 함수를 사용하고, 데이터 전송 중 노드의 움직임에 의한 경로의 단절을 방지하기 위해 새로운 경로 관리 기법을 소개한다. 이웃 노드의 움직임을 감지되면, 경로가 단절되기 전에 라우팅 에이전트는 다음 홉 노드를 이웃노드로 변경한다. 시뮬레이션 결과를 통해 제안한 라우팅 기법의 성능이 기존의 AODV 방식보다 우수함을 보인다.

• 센서학회지
• /
• 제19권4호
• /
• pp.297-305
• /
• 2010

A home healthcare system based wireless sensor network, which can continuously monitor and manage the elderly's electrocardiogram(ECG) signal at any space at home without space limit is proposed. The communication coverage of wireless network is expended by multi-hop wireless sensor network. In order to send the elderly's ECG data wirelessly, a small size ECG sensor node was designed to forward the ECG data over multi-hop relay network. The packet acquired by mobile ECG node is transmitted through wireless intermediate nodes to base station for analyzing the packet reception rate. Modified minimum cost forwarding(MMCF) protocol and flooding protocol are designed and implemented to check the transmission efficiency of a packet in a wireless sensor network. The developed MMCF protocol shows an advantage of high reception rate by reduced network traffic.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.605-612
• /
• 2011

As the power grids are integrated into one big umbrella called a "smart grid," communication protocol plays a key role in successful operations. The successful deployment of smart grid interoperability is a major hurdle that must be overcome. The micro grid, a small power system that distributes energy resource, is operated in diverse regions. Different vendors use different communication protocols in the operation of the micro grid. Recently, the IEC 61850 has been legislated to solve the interoperability problems in power utility automation. The present paper presents a micro grid system based on the IEC 61850 protocol. It consists of a micro grid monitoring system, a protocol converter that transforms serial data to IEC 61850 data, and distributed energy resource controllers for diverse DER nodes. A developed communication gateway can be deployed for DER controllers with serial links to exchange data with IEC 61850-based devices. The gateway can be extended to IEC 61850-based distribution automation systems, substation automation systems, or SCADA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.

• 정보처리학회논문지D
• /
• 제18D권5호
• /
• pp.393-402
• /
• 2011

본 논문에서는 상황인식 시스템 개발에 필수적인 미들웨어의 설계와 적용에 관하여 논한다. 다양한 상황 데이터들을 처리할 수 있도록 트랜스듀서 인터페이스 프로토콜을 정의하고, 미들웨어 모듈 간 일관성 있는 데이터 처리를 위하여 메시지 기반의 미들웨어를 설계하고 구현하였다. 상황인식 미들웨어는 서비스 기반 구조로 설계되어서 모듈간 기능이 독립적이고 확장성이 뛰어나다. 또한 모듈 간 통신은 메시지를 이용하기 때문에 응용 프로그램 개발이 용이해진다. 본 논문의 상황인식 미들웨어는 교량의 구조물 건전성 감시 시스템에 적용하여 실험하였고, 미들웨어의 효용성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.