• 센서학회지
• /
• 제23권4호
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.54-62
• /
• 2008

International organizations related to air transport such as ICAO, IATA, ACI are forecasting that the number of passenger will grow about 4.4% annually up to 2015. Therefore, the innovation of given system technology and operation procedure is required in global scale to cope with the increase of air traffic demand. CNS/ATM infrastructure based on satellite is considered to play key role in order to solve the problems due to the dramatic increase of air traffic demand over the world. Free flight concept in the air transport operation has been proved with CNS/ATM infrastructure especially in USA and Europe. Therefore, it is necessary to develop key technologies to overcome technology gap and to secure international competitiveness in Korea. ADS-B is an important issue, and new element technologies should be considered as essential items which were shown in Capstone project. Nowadays, the free flight concept is combined to Air Transport Road Map such as NextGen project in USA, SESAR in Europe. In this process, free flight is included in the concepts such as ATM(Air Traffic Management), aviation security and safety, environmental protection and economy development, wide area weather variable reduction service, information integration and application between the related authorities (civil/military) etc. The purpose of research is to establish mid-term and long-term infrastructure plan and strategy for free flight realization in Korea. The analysis of action target and equipment construction status, phase construction plan of infrastructure has been performed by considering mid-term and long-term free flight plans of USA and Europe.

• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.43-47
• /
• 2016

공판중심주의 강화와 법률시장 개방 등 사법제도의 변화로 인해 화재현장의 해석은 과학적인 증거를 통해 철저한 실체적 진실의 구현을 지향하고 있다. 화재에 대한 실체적 진실 규명의 근거가 되는 물적 증거물에 대한 적정한 수집이 선행되지 않으면 법정에서 증거능력 부정 또는 증명력이 배척되어 조사결과에 대한 신뢰도는 추락하게 된다. 엄정하게 관리된 현장에서 물리적, 화학적으로 변형 우려가 높은 화재 증거물의 특성상 최대한 원형을 보존하도록 채취되어야 하고 채취부터 분석 감정에 이르는 모든 과정이 사진 및 기록으로 유지되어야 하며 이런 과정들에 대한 세부적인 매뉴얼 또는 지침이 규정화 될 필요가 있다. 이런 절차들이 정립되고 조사 기관간 협업 관계가 구축된다면 신뢰도 높은 화재감식 체계가 될 것이다.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.193-204
• /
• 1997

The purpose of this study is to measure some physical environmental factors and to doucument students' perceptions of them. 11 middle schools in Cheju City were divided into four areas according to their locations and two schools were selected for the study. 144 thirteen-year-old students in two middle school in a overcrowded area in Cheju City-one middle school building is insulated and the other is not insulated-were taken for the questionnaire survey. The finding of the study are as follows: 1) The classrooms were not equipped with any heating equipment. The buildings are not insulated well. As a result, the room temperature was much lower(12.9-16.2℃) than comfortable indoor temperature in winter(21.5-24.5℃). The classroom were found to be colder(12.9-16.2℃) than usual pleasant indoor temperature(21.5-24.5℃) in winter. 2) The classroom were so far from the street(20m) that there was little noise from traffic. Nevertheless, the noise level was higher(62.5-66.2 dB(A), when the windows were open; 51.7-62.8dB(A), when closed than the noise tolerance level specified in the Environment Protection Laws(50.0dB(A)). 3) As for the visual environment, the location of classroom, the adequate sun exposure, and the total states of windows in classrooms influenced on the illuminance. While standard indoor illuminance is 300 Lux, the classrooms facing south had illuminance of 231 Lux, from day light: and the ones facing west, 380 Lux. 4) Students generally found other aspects of the physical environment of their classrooms unsatisfactory. Chalk dust was generated to a serious extent near the main chalkboard(0.25mg/㎥) of classrooms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.226-228
• /
• 2008

In recent years, the companies of electric power equipment for MV and HV classes trend to develop the eco-friendly insulated(solid, eco-gas, air etc.) switchgear which replaces existent SF6 gas insulated switchgear due to environmental problems such as global warming and so on. This paper makes reference to the newly developed Solid Insulated Switchgear (SIS) which uses the eco-friendly material such as epoxy for insulation. The insulation of the solid insulated switchgear (SIS) is composed of an epoxy, vacuum and air. The solid insulated switchgear (SIS) is a slate of the art product. The advantages of SIS are advanced reliability, economical efficiency, safety, maintenance free, reduction of installation area and the protection of environment. The solid insulated switchgear (SIS) is FE Analyzed such as electromagnetic, mechanical, thermal and fluid in order to find the optimal design. Thens SIS has been verified by international standard test. (IEC 62271 - 100 and so on.) As a result of this, the solid insulated switchgear (SIS) has been estimated as an alternative for eco-friendly MV class switchgear.

• 한국화재소방학회논문지
• /
• 제28권2호
• /
• pp.1-8
• /
• 2014

보호복 섬유 및 재료의 개발을 통해 나아진 단열 성능을 제공함에도 불구하고 보호복의 화상 방지는 아직도 중요한 사항이다. 화염으로부터의 보호성능을 보장받기 위해서 보호복의 정확한 성능검증이 필요하며, 열보호 특성을 정확히 파악하기 위해 ISO 등은 시험방법을 표준화하여 제시하고 있다. 하지만 대부분의 경우, 높은 열유속 조건에 대해 보호복의 열보호 성능을 시험하는 것으로 되어 있어, 고열유속에 의한 시편의 파괴가 일어나기 쉽다. 그러므로 낮은 열유속 조건에서 보호복의 열보호 성능을 측정하는 방법이 필요하며, 본 연구에서는 낮은 열유속에 대한 열보호 성능을 측정할 수 있는 화상 및 통증유발시간에 기초한 개선된 RPP(복사열 보호 성능) 지수와 그의 측정방법을 제안하였다. 또한 제안된 열보호성능 측정 방법을 실험을 통해 확인하고, 보호복의 비정상열전달특성을 파악하였다. 또한 기존의 여러 가지 열보호성능지표들과 제안지표와의 관계를 제시하였다.

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.103-109
• /
• 2018

Purpose: To analyze cone-beam computed tomography (CBCT) use, indications, and exposure parameters in San $Jos{\acute{e}}$, Costa Rica. Materials and Methods: A cross-sectional study was performed. All CBCT examinations over a period of 6 months at 2 radiological centers in San $Jos{\acute{e}}$, Costa Rica were evaluated. The examinations were performed with Veraview EPOC X550 and Veraviewepocs 3D R100 equipment. The patients' age and sex, clinical indication for CBCT, region of interest (ROI), repeat examinations, specialty of the referring dentist, field-of-view (FOV), tube voltage (kV), tube current (mA), and radiation dose (${\mu}Gy$) were evaluated. Patients were classified by age as children (${\leq}12years$), adolescents(13-18 years), and adults(${\geq}19years$). Results: The mean age of the 526 patients was 49.4 years. The main indications were implant dentistry and dental trauma. The most frequent ROIs were posterior, while anterior ROIs were much less common. The highest percentage of repeat examinations was in children. Fifty-six percent of the referring dentists were specialists. The most commonly used FOV was small. The mean tube voltage and current were 79.8 kV and 7.4 mA for Veraview EPOC X550 and 89.9 kV and 6 mA for Veraviewepocs 3D R100, respectively. The mean doses for children, adolescents, and adults were $6.9{\mu}Gy$, $8.4{\mu}Gy$, and $7.8{\mu}Gy$, respectively. Conclusion: Although CBCT was most commonly used in adults for implant dentistry, most repeat examinations were in children, and the highest mean dose was in adolescents. Additional dose optimization efforts should be made by introducing low-dose protocols for children and adolescents.

• 한국화재소방학회논문지
• /
• 제34권3호
• /
• pp.91-99
• /
• 2020

최근 해외 신종 감염병 코로나19가 우리나라뿐만 아니라 세계적으로 확산되고 있다. 이로 인해 정부는 2020년 2월 23일 감염병 재난 위기경보 수준을 심각단계로 격상했다. 이 연구는 공중상황이론을 적용하여 위기경보 발령에 따른 공중을 유형별로 분류해 보고, 위기경보체계 개선방안을 제시하는 것이다. 이를 위해 위기경보에 관한 국민의 인식정도를 확인하였다. 검증을 통해 공중상황이론이 위기경보에 대한 공중의 정보행위 의도를 분석하기에 적합한 이론적 틀이라는 것을 확인했다. 공중을 유형별로 분류한 결과 42.7%가 활동공중으로 분류되었다. 이를 토대로 위기경보체계를 국민과 소통할 수 있는 체계로 재정비할 것을 제안했다.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.36-46
• /
• 2008

본 논문은 대전력시험설비를 이용한 특고압 가스 절연 부하 개폐기의 대전력 시험회로의 구성과 통합형 시험 방법에 관하여 연구하였다. 대전력시험설비는 전기기기의 전기적 및 기계적인 성능을 검증하는 설비로서 단락발전기, 보호차단기, 투입스위치, 임피던스, 고압변압기, 저압변압기, 측정 및 보호시스템 등으로 구성되며, 이 시스템을 이용하여 단시간전류시험, 전류개폐용량시험, 단락투입 및 차단시험 등을 실시한다. 특고압 가스 절연 부하 개폐기의 규격으로는 국내 배전계통에 적용되는 ES(한국전력공사 표준규격) 5925-0002가 있으며, 국제 규격으로는 IEC 60265-1, 62271-1 및 IEEE C 37.74 등이 있다. 본 논문에서는 여러 규격에 각각 규정되어 있는 시험 절차, 시험회로 구성 및 시험 방법 등을 통합하여 600[MVA]급 대전력 시험설비에 적용하였다.

• 센서학회지
• /
• 제24권5호
• /
• pp.319-325
• /
• 2015

While the conventional personal protective equipments (PPEs) covers a variety of devices and garments such as respirators, turnout gear, gloves, blankets and gas masks, several electronic devices such as personal alert safety system (PASS) and heads-up displays in the facepiece have become a part of firefighters personal protective equipments through past several years. Furthermore, more advanced electronic sensors including location traking sensor, thermal imaging caerma, toxic gas detectors, and even physiological monitoring sensors are being integrated into ensemble elements for better protection of firefighters from fire sites. Despite any electronic equipment placed on the firefighter must withstand environmental extremes and continue to properly function under any thermal conditions that firefighters routinely face, there are no specific criteria for these electronics to define functionability of these devices under given thermal conditions. Although manufacturers provide the specifications and performance guidelines for their products, their operation guidelines hardly match the real thermal conditions. Present study overviews firefighter's fatalities and thermal conditions that firefighters and their equipments face. Lastly, thermal packaging methods that we have developed and tested are introduced.