• Journal of fish pathology
• /
• v.27 no.1
• /
• pp.47-56
• /
• 2014

Propolis is a beehive product with a very complex chemical composition, widely used in folk medicine because of its several therapeutic activities. This study was conducted to measure the efficacy of propolis on non-specific defense reactions, specific immune response, and protection levels against pathogen challenge with Streptococcus iniae. in vitro and in vivo. In vitro, the phagocytic activity and NBT assay of peripheral blood leukocytes (PBL) were evaluated in a various propolis extractsconcentrations (0, 10, 50, 100, 150, 250 and $500{\mu}g/ml$). The optimal concentration showing activation of propolis extracts was determined to $100{\mu}g/ml$. In vivo, they were divided into four groups (PBS, propoli extractss, vaccine, propolis extracts + vaccine) in vivo. Fish were received i.p. injection of either PBS or propolis extracts, and in the presence or absence of formalin inactivated S. iniae ($1{\times}10^8$ CFU/fish), respectively. The level of haematocrit is not affected among experimental groups. The phagocytic activity and the NBT reduction activities of head kidney phagocyte were markedly (p<0.05)augmented in the propolis extracts groups than in the PBS-control group, respectively. The level of serum lysozyme activity was significantly (p<0.05) increased in the propolis extracts treated groups than in the PBS-control group. The agglutinin titer was significantly (p<0.05) enhanced in the vaccine+propolis extracts group than in the vaccine group, but there was no difference between PBS-control and propolis treated group. The results of the present study suggest that propolis extracts seems to be a promising compounds of non-specific immune stimulator, also being able to use a good adjuvant.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1221-1233
• /
• 2016

Purpose: To investigate any potential association between wine and breast cancer risk. Materials and Methods: We quantitatively assessed associations by conducting a meta-analysis based on evidence from observational studies. In May 2014, we performed electronic searches in PubMed, EmBase and the Cochrane Library to identify studies examining the effect of wine drinking on breast cancer incidence. The relative risk (RR) or odds ratio (OR) were used to measure any such association. Results: The analysis was further stratified by confounding factors that could influence the results. A total of twenty-six studies (eight case-control and eighteen cohort studies) involving 21,149 cases were included in our meta-analysis. Our study demonstrated that wine drinking was associated with breast cancer risk. A 36% increase in breast cancer risk was observed across overall studies based on the highest versus lowest model, with a combined RR of 1.0059 (95%CI 0.97-1.05) in dose-response analysis. However, 5 g/d ethanol from wine seemed to have protective value from our non-linear model. Conclusions: Our findings indicate that wine drinking is associated with breast cancer risk in a dose-dependent manner. High consumption of wine contributes to breast cancer risk with protection exerted by low doses. Further investigations are needed for clarification.

• Journal of architectural history
• /
• v.20 no.3
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.187-193
• /
• 2020

The increase in the area of impervious water due to the recent abnormal weather conditions and rapid urbanization led to a decrease in the amount of low current, resulting in an increase in the amount of surface runoff. Increased surface runoff is causing erosion, destruction of underwater ecosystems, human and property damage in urban areas due to flooding of urban river. The damage has been increasing in Korea recently due to localized heavy rains, typhoons and floods. As a countermeasure, the Busan Metropolitan Government will proceed with the creation of the Eco-Delta City waterfront zone in Busan with the aim of creating a future-oriented waterfront city from 2012 to 2023. Therefore, the current urban river conditions and precipitation data were collected by utilizing SWMM developed by the Environment Protection Agency, and the target basin was selected to simulate flood damage. Measures to reduce flood damage in various cases were proposed using simulated data. It is a method to establish a disaster prevention plan for each case by establishing scenario for measures to reduce flood damage. Considering structural and non-structural measures by performing an analysis of the drainage door with a 30-year frequency of 80 minutes duration, the expansion effect of the drainage pump station is considered to be greater than that of the expansion of the drainage door, and 8 scenarios and corresponding alternatives were planned in combination with the pre-excluding method, which is a non-structural disaster prevention measure. As a result of the evaluation of each alternative, it was determined that 100㎥/s of the pump station expansion and the pre-excluding EL.(-)1.5m were the best alternatives.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.771-781
• /
• 1997

In order to select an effective and appropriate evaluation method for the marine environmental protection and management, it is necessary to evaluate the present status of environmental conditions and to monitor and regulate the harzadous waste continuously. Among the evaluation methods that use benthic fauna, some graphical methods and biological index methods such as species abundance-biomass (SAB), Rank-frequency diagram (RFD), Abundance-Biomass comparison (ABC), log-normal distribution (LND), and Benthic Pollution Index (BPI) modified by Infaunal Trophic Index were used for the assessments of marine environment in the Inchon coastal area. Even though the graphic methods are convenient for easy glimpse of general trend of environmental condition but because they require sufficient ecological data, those methods do not fit for analysis or comparison of regional and detailed environmental condition. On the other hand, when BPI was applied, it was able to compare the spatial benthic conditions. Through considering the functional aspects of benthic fauna which can not be obtained in the cluster analysis, BPI was made it possible to measure or trace down the source of pollution. In the case of the environmental assessment result analyzed in Inchon coastal area, the north eastern part of Yongjongdo was more influenced by the pollution than the outer area of Inchon. The research indicates that especially Inchon harbor has been greatly affected.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.286-294
• /
• 2013

Increasing concern for the health, well-being, and income of the people has expectedly brought continuous increase in the industrial value of medicinal plants in recent years as these are also used in foods and cosmetics. However, Korea's increased import of these products from China due to the FTA contract causes negative effects on its industrial value. In this regard, various measures for medicinal crop seed development and production, organization and expansion of circulation and forest land use deregulation are needed to promote the agricultural food industry including medicinal plants. As a measure, first, a database of medicinal plants should be built that can help to promote the national medicinal industry and the seed management system. Second, agricultural productivity should be enhanced via the development and supply of varieties of high quality medicinal plants. Third, there should be a good practice of the system maintenance for the production and supply of medicinal crop seeds. Fourth, production and distribution system of medicinal plants should be established by standardization of high quality seeds. Nowadays, the consumption pattern of medicinal crops is changing from direct ingestion to cosmetics, drugs, and food and this is expected to increase continuously. Consequently, the increased production of medicinal crops will support the development policy and the institutional improvement in response to this trend of the positive change of industrialization.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.123-134
• /
• 2019

The introduction of the world geodetic reference system in cadastral sector can apply the international standardization of cadastral survey and can be the basis for the creation of new industries by merging with other industries based on spatial information. With the introduction of the world geodetic reference system, non-coincidence land may cause problems which are whether the cadastral record and the real estate register are not consistent, etc. This problem infringes on the protection of ownership of citizens suggested in the main purpose of ｢Act On The Establishment, Management, Etc. Of Spatial Data｣. We have analyzed at overlapping cases between private land and overlapping cases between national and public land and suggested institutional improvement measures to solve problems arising on the site. As a result, it will be necessary to introduce a transformation verification measure by the world geodetic reference system in order to assign a function as a cadastral records to mapping converted to the world geodetic reference system. It is also expected that the legal and institutional basis should be established for alert adjustment and positioning through verification measures. Finally, it is difficult to determine the transformation factor as the co-ordinates of common points also differ because survey results vary by work area. Therefore, it is deemed necessary to consider the requirement to use the cadastral measurement basis by the world geodetic reference system in 2021.