• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.411-416
• /
• 2003

An effort was attempted to utilize an under-utilized protein source, rice bran protein, in coating or wrapping food material for the purpose of protection them from oxidation and bacterial infection. However, the utilization of rice bran protein as a food coating material is limited because the rice bran protein coating material itself can be spoiled by a bacterial infection. Therefore, this study was conducted to produce the economical and antibacterial rice bran protein film by utilizing rice bran and bacteriocin-producing microorganism. Bacteriocin produced by Pseudomonas putida 21025 was partially purified after 33h of shaking incubation at 30$^{\circ}C$. The amount of amino-type nitrogen did not increase in the rice bran protein film containing the bacteriocin any more after gradual increase upto the content of 0.22％ for 8 days, while that without the bacteriocin increased continuously, implying that application of the bacteriocin to the rice bran had positive effects on prolonging the shelf-life of not only film itself but also the foods wrapped by this film.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.166-171
• /
• 2016

Cathodic protection is widely recognized as the most cost effective and technically appropriate corrosion prevention methodology for the port, offshore structures, ships. When applying the cathodic protection method to metal facilities in seawater, on the surface of the metal facilities a compound of calcium carbonate($CaCO_3$) or magnesium hydroxide($Mg(OH)_2$) films are formed by $Ca^{2+}$ and $Mg^{2+}$ ions among the many ionic components dissolving in the seawater. And calcareous deposit films such as $CaCO_3$ and $Mg(OH)_2$ etc. are formed by the surface of the steel product. These calcareous deposit film functions as a barrier against the corrosive environment, leading to a decrease in current demand. On the other hand, the general calcareous deposit film is a compound like ceramics. Therefore, there may be some problems such as weaker adhesive power and the longer time of film formation uniting with the base metal. In this study, we tried to determine and control the optimal condition through applying the principle of cathodic current process to form calcareous deposit film of uniform and compact on steel plate. The quantity of precipitates was analyzed, and both the morphology, component and crystal structure were analyzed as well through SEM, EDS and XRD. And based on the previous analysis, it was elucidated mechanism of calcareous deposit film formed in the sacrificial anode type (Al, Zn) and current density (1, 3, $5A/m^2$) conditions. In addition, the taping test was performed to evaluate the adhesion.

• Journal of Radiation Protection and Research
• /
• v.20 no.1
• /
• pp.45-52
• /
• 1995

This study is to compare A point doses in human pelvic phantom by film dosimetry, computer planning and manual calculation by using of along-away table. We developed tissue equivalent human pelvic phantom composed of four pieces of cylindrical acryl tubes with water, to simulate intracavitary radiation (ICR) in patients with cervix cancer. When the phantom assembled from 4 pieces, it has a small space for inserting Fletcher-Suit-Delclos applicator like a human vagina. Fletcher-Suit-Delclos applicator inserted into the space was packed tightly with furacin gauzes, and three $^{137}Cs$ sources with radioactivity of $15.7mg\;Ra-eq$ were inserted into the tandem. For the film dosimetry, two pieces of X-OMAT V film (Kodak Co.) of which planes include point A, were arranged orthogonally in the slits between phantoms. A point dose and iso-dose curves were measured by means of optical densitometer. A point doses by film dosimetry, RTP system and manual calculation by using of along-away table were compared, and iso-dose curves by film dosimetry and computer planning were also compared. The dose of A point was 51.2cGy/hr by film dosimetry, 46.7cGy/hr by RTP system and 47.9 cGy/hr by along-away table. A point dose by computer planning was similar to the dose by calculation using of along-away table with acceptable accuracy $({\pm}3%)$, however, the dose by film dosimetry was different from two others with about 10% error. Since most clinical beams contains a scatter component of low energy photons, the correlation between optical density and dose becomes tenuous. In addition, film suffers from several potential errors such as changes in processing conditions, interfilm emulsion differences, and artifacts caused by air pockets adjacent to the film. For these reasons, absolute dosimetry with film is impractical, however, it is very useful for checking qualitative patterns of a radiation distribution. In future, solid state dosimeter such as TLD must be used for the dosimetry of ionizing radiation. When considerable care is used, precision of approximately 3% may be obtained using TLD.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.124-124
• /
• 2003

To improve the electrochemical properties of thin-film LiCoO$_2$ cathodes, metal oxides were coated on the LiCoO$_2$ thin films using f sputtering. Galvanostatic charge-discharge experiments showed the enhanced cycling behaviors in the metal-oxide coated LiCoO$_2$ thin films than the uncoated ones. These results are because the metal-oxide coating layer suppresses the degradation of Li-diffusion kinetics during cycling, which is related to the protection of cathode surface from the electrolytes [l-3]. The variation in the metal-oxide coating thickness ranging from 10 to 300 nm did not affect the electrochemical properties. Changes of lattice constants in the coated and bare LiCoO$_2$ thin films at different charged states will also be discussed.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.762-764
• /
• 1992

This Paper presents some experimental result of current limiting and short circuit interruption behavior of thin copper film, 12${\mu}m$, 25${\mu}m$, 40${\mu}m$, 50${\mu}m$ on alumina substrate. and a fuse-link having elements of copper film provided with high-precision small hols with electrolytical process. Construction, fabrication, as well as the test circuitry built especially for the develoment of this fuse-links are explained below.

• ETRI Journal
• /
• v.24 no.5
• /
• pp.398-400
• /
• 2002

Using $Cr_2O_3$ thin film, we developed a novel etch-stop technique for the protection of silicon surface morphology during deep ion coupled plasma etching of silica layers. With this technique we were able to etch a silica trench with a depth of over 20 ${\mu}m$ without any damage to the exposed silicon terrace surface. This technique should be well applicable to fabricating silica planar lightwave circuit platforms for opto-electronic hybrid integration.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.82-86
• /
• 2006

Film has been used widely since Auguste and Louis Lumiere hold the first private screening in 1895. Star Wars Episode II: Attack of the Clones directed by George Lucas released on May 16, was the first motion picture both to be shot completely on a high definition digital 24-frame system and to be projected by digital projectors. Its success showed us that the digital cinema era is imminent. Digital Cinema will enable the studios and movie distributors to low the expenses of making and delivering film prints and dissemination of it can put the entire digital cinema ecosystem in great jeopardy. Therefore DRM and other security policies are used for digital cinema content protection. In this paper it will be discussed how the digital cinema platform can package (encooe & encrypt), transport, and project the digital cinema contents safely.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.341-343
• /
• 1999

The morphology and composition of anodic films, formed on aluminium at various current densities, in the range $1-100{\;}Am^{-2}$, in the molten bisulphate melt at different temperatures (418-498K), have been studied using transmission electron microscopy of ultramicrotomed film sections, and ion beam thinned films. The first sign of incipient breakdown revealed by transmission electron microscopy of stripped films, is always the appearance of dark regions about 1,000 nm in diameter, representing local overgrowth of the film. The breakdown mechanism is closely related to thermal effects, because temperature rises at regions representing local overgrowth in the stripped films were observed at voltages close to the breakdown voltage, likely arising through impact ionization.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2494-2498
• /
• 2012

Preparation of several new spirocyclic mercapto derivatives is described. Thiol protection on multi-carbonyl compounds allows of high sulfur content necessary to induce high refractive index. Condensation of 1,3-dimercapto-2-propanol and cyclohexanone followed by successive oxidation and thioacetalization affords a dispirocycle with four sulfurs. Selective S,S-protection of cyclohexane-1,4-dione is achieved with 1,3-dimercapto-2-propanol and 2,3-dimercapto-1-propanol to provide dispirocycles with four sulfurs. Olefine-oxidation of norbornene gives a useful dialdehyde intermediate which is transformed to 1,3-dithiolane for a linearly-bound-cyclic molecule. Refractive index of linearly-bound-cycles was below 1.60 and dispirocycles exhibited high refractive index of 1.57-1.69.