• 대한전자공학회논문지SD
• /
• 제46권12호
• /
• pp.105-112
• /
• 2009

본 논문에서는 $0.35{\mu}m$ Bipolar-CMOS-DMOS(BCD)공정으로 설계한 스마트 파워 IC 내의 가드링 코너 영역에서 발생하는 비정상적인 정전기 불량을 관측하고 이를 분석하였다. 칩내에서 래치업(Latch-up)방지를 위한 고전압 소자의 가드링에 연결되어 있는 Vcc단과 Vss 사이에 존재하는 기생 다이오드에서 발생한 과도한 전류 과밀 현상으로 정전기 내성 평가에서 Machine Model(MM)에서는 200V를 만족하지 못하는 불량이 발생하였다. Optical Beam Induced Resistance Charge(OBIRCH)와 Scanning Electronic Microscope(SEM)을 사용하여 불량이 발생한 지점을 확인하였고, 3D T-CAD 시뮬레이션으로 원인을 검증하였다. 시뮬레이션 결과를 통해 Local Oxidation(LOCOS)형태의 Isolation구조에서 과도한 정전기 전류가 흘렀을 때 코너영역의 형태에 따라 문제가 발생하는 것을 검증하였다. 이를 통해 정전기 내성이 개선된 가드링 코너 디자인 방법을 제안하였고 제품에 적용한 결과, MM 정전기 내성 평가에서 200V이상의 결과를 얻었다. 통계적으로 Test chip을 분석한 결과 기존의 결과 대비 20%이상 정전기 내성이 향상된 것을 확인 할 수 있었다. 이 결과를 바탕으로 BCD공정을 사용하는 칩 설계 시, 가드링 구조의 정전기 취약 지점을 Design Rule Check(DRC) 툴을 사용하여 자동으로 찾을 수 있는 설계 방법도 제안하였다. 본 연구에서 제안된 자동 검증방법을 사용하여, 동종 제품에 적용한 결과 24개의 에러를 검출하였으며, 수정 완료 제품은 동일한 정전기 불량은 발생하지 않았고 일반적인 정전기 내성 요구수준인 HBM 2000V / MM 200V를 만족하는 결과를 얻었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 1999

Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.

• 가정과삶의질연구
• /
• 제20권5호
• /
• pp.149-166
• /
• 2002

In this study, 1 have analyzed the state of the use of information technology by the at-risk children who are residing in Husan metropolitan area. The ultimate goal of this study is to help ensure the healthy development of the children and improve the quality of their lives in this information-oriented society. For this research, 1 surveyed 183 children living in an institution or a low-income family in Busan metropolitan area. The survey questionnaire was designed to obtain information on the respondents, socio-demographic characteristics, computer-related conditions of the immediate and social environments, patterns of computer and Internet use, their experience and degree of so called, Net-generation syndrome, Internet addiction disorder, changes in social and familial life caused by Internet use, and exposure to pornographic materials. The results show that 95.9 % of at-risk children in Husan own a computer, 60.9 % of those computers being Pentium Ⅲ. A majority of the children (74.9 %) are connected to Internet at a high-speed, using such devices as LAN, ADSL or cables. About seventy-six percent of the children have used a PC and Internet less than two years. In other words, a majority of them have not used those for a long period of time. The main results of the research are summarized in the following: There is a significant difference among at-risk children in terms of experiences in computer and Internet use according to their grade levels. There is a gender difference in the amount of time spent on computer and Internet. Boys spend more time every week on computer and Internet than girls do. There is a significant difference in the pattern of computer and Internet use, according to the type of their risk, and grade level. The so-called 'Net Generation Syndrome' is not serious in this group. A majority of the at-risk children think that Internet is more interesting than TV. They hardly shop on Internet, and they don think the advertisements on Internet are a serious problem. Also, unlike many people assumptions, their desire to communicate through on-line chatting was very low. They do not tend to buy computer game programs, and Internet Addiction Disorder was not pronounced among them. The at-risk children rarely had an exposure to pornographic materials in the cyber space. However, the exposure was more frequent for institutionalized children than children in low-income families. These results point to a need for a policy to improve the welfare of at-risk children and guarantee their right to information.

• 한국IT서비스학회지
• /
• 제13권3호
• /
• pp.149-164
• /
• 2014

The laws and policies governing Korea's game regulations are becoming more and more topics for debate as we enter the Age of Internet. The nature of the basis for Internet regulations and policies are not rooted in freedom of speech or fundamental values of democracy, but rather focused on solving real-world problems such as protection of the youth. Furthermore, the reality is that regulatory devices for keeping the social order such as regulating gambling are being applied directly to games without consideration on the characteristics of Internet gaming, raising concerns that the expansion of constitutional values and innovative empowerment inherent to the Internet are being weakened. The Geun-Hye Park Administration which succeeded Myung-Bak Lee's Administration, even went so far as to implement the so-called "Shutdown Policy", which prohibits access to Internet games during pre-defined time zones and also instigated a time zone selection rule. In order to curb the gambling nature of Internet games, government-led policies such as the mandatory personal identification and prohibition of player selection or in other words mandatory random player selection are being implemented. These institutions can inhibit freedom of speech, which is the basis of democracy, violate the right of equality through unreasonable discrimination between domestic and foreign service providers, and infringe upon the principles of administrative law, such as laws, due process in policies, and balance in among policies and governmental bodies. Going forward, if Korea's Internet game regulations and polices is to develop in a rational manner, regulatory frameworks will need to be designed to protect the nature of the Internet and its innovative values that enable the realization of constitutional values; for example, the Internet acting as the "catalytic media for freedom of expression as a fundamental human right ", which has already been acknowledged by the Korea's Constitutional Court. At the same time, transparent procedures should be put into place that will allow diverse participation of stakeholders including game service providers, game users, the youth and parents in the legislation and enforcement process of regulatory institutions; policies will also need to be transformed to enable not only regulatory laws but also self-regulation system to be established. And in this process, scientific and empirical analysis on the expected effects before introducing regulations and the results of enforcing regulations after being introduced will need to be strengthened.

• Journal of Preventive Medicine and Public Health
• /
• 제17권1호
• /
• pp.57-63
• /
• 1984

소음작업(騷音作業) 근로자(勤勞者)들의 이보호구장용(耳保護具裝用)의 여부(與否)에 따른 청력보존(聽力保存)의 효과(效果)를 관찰하기 위해 $16{\sim}24$세(歲)사이의 건강(健康)한 여성(女性) 기직공(機織工) 1,237명을 대상(對象)으로 이전(耳栓)을 장용(裝用)하고 있는 자(者)들을 실험군(實驗群), 하지 않고 있는 자(者)들을 대조군(對照群)으로 하고, 1982년(年) 4월에서 1983년(年) 1월(月)사이에 실시된 특수건강진단(特殊健康診斷) 결과지(結果紙)에서 그들의 근속년수(勤續年數), 4,000Hz에서 AA-30A, RION Japon청력계(聽力計)로 측정된 최소가청치(最小可聽値)를 조사 비교하였다. 최소가청치(最小可聽値) 40 dB초과의 경우는 대조군(對照群)의 좌이(左耳) 44.6% 우이(右耳) 40.9%, 실험군(實驗群)의 좌이(左耳) 8.0% 우이(右耳) 6.6%였고 근속년수(勤續年數)가 길수록 대조군(對照群)과 실험군(實驗群) 모두에서 증가(增加)하였다. 최소가청치(最小可聽値)의 분포(分布)는 좌우이(左右耳)사이에 유의한 차(差)를 실험군(實,驗群)과 대조군(對照群) 모두에서 볼 수 없었으나, 대조군(對照群)과 실험군(實驗群)간에는 좌우이(左右耳) 모두에서 통계적으로 유의한 차(差)를 나타내었다(p<0.005). 대조군(對照群)과 실험군(實驗群)사이에 최소가청치(最小可聽値) 40 dB초과에 속하는 경우의 차이(差異)는 근속년수(勤續年數) 1년이하, 3년, 5년, 5년 초과에 따라 각각 좌이(左耳) 26.8%, 38.0%, 43.3%, 45.4%, 우이(右耳) 29.5%, 31.6%, 38.9%, 36.5%로 증가(增加)하는 경향이었다.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.269-282
• /
• 2017

Objectives: Currently, masks against yellow dust and fine particulates are being certified with no consideration of facial dimensional variations among children and adults. The aims of this study were to develop masks against yellow dust and fine particulates for children in Korea and provide basic data to suggest new test methods for mask certification that consider the breathing capacity of children. Methods: A total of 730 study participants aged from six to 13 years old were recruited in the Seoul, Gyeonggi, and Incheon region. This study used a 3D scanning instrument to obtain 16 facial anthropometric data points. Literature reviews, a comparison of breathing capacity between adults and children, and analysis of children's pulmonary physiological data were conducted in order to suggest new test standards for certifying children's masks against yellow dust and fine particulates. In addition, types of children's masks, choice of wearing a mask or not, and reasons for not wearing masks were surveyed. Results: Based on a clustering analysis of participants' facial dimensions, facial shapes were classified into three groups: small, medium, and large. The sizes of children's masks were subtracted by using 3D sketch techniques(Large: $121.25mm{\times}89.46mm$, Medium: $111.92mm{\times}78.55mm$, Small: $102.13mm{\times}72.87mm$). In certifying children's mask, flow rates of $60{\ell}/m$ for the filtering efficiency test and $20{\ell}/m$ for the breathing resistance test were recommended, since children's pulmonary physiological capacity is about 60-70% of adults' pulmonary capacity. Conclusions: The results of this study suggest that three mask sizes for children would be sufficient and practical for providing protection against yellow dust and fine particulates. Revising current test methods for certifying respiratory protective devices for children is important, since children's pulmonary physiological capacity substantially differs from that of adults. Therefore, it is recommended that new test standards for certifying children's masks be promulgated in the near future.

• Journal of Acupuncture Research
• /
• 제27권1호
• /
• pp.75-86
• /
• 2010

Objectives : We developed and proposed a guideline for safety and performance assessment of electric moxibustion apparatus (class II medical device). Methods : We drafted the guideline for safety and performance assessment of electric moxibustion apparatus by referring the existing standards, guidelines and measurement data from commercially available products. Temperature characteristics such as maximum temperature and ramp time, and physical characteristics such as weight, noise and diameter were measured. User friendliness was also evaluated for commercial devices. Results : This guideline only can be applied to the electric moxibustion apparatus where moxa is being heated by electricity for medical proposes. Maximum temperature of higher than $50^{\circ}C$ can be achieved mostly. Ramp rate of temperature seems to be reliable. Control of temperature is needed to be improved. Moxa and its derivative products seem to be regulated for reliable temperature performance for clinical application. Requirements for design and development of electric moxibustion apparatus are suggested : temperature indicator, temperature control and its accuracy, safety measure, surge protection, user friendliness and instruction for use (IFU). Design recommendation of the reduction of noise level and energy loss are suggested for better products. Conclusions : We proposed a guideline for safety and performance assessment of electric moxibustion apparatus to improve the quality of relating products and aid their commercialization by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• 전자공학회논문지SC
• /
• 제48권4호
• /
• pp.47-53
• /
• 2011

전동차 출입문은 포켓 슬라이딩 도어, 아웃 슬라이딩 도어, 플러그 도어로 구분된다. 현재 국내 전동차의 표준규격으로 제시되어 있는 포켓 슬라이딩 도어는 철도차량이 고속화됨에 따라 소음 및 외풍의 차단이 어려운 단점이 있으며, 아웃 슬라이딩 도어 역시 소음 및 외풍차단이 어려운 시스템이다. 반면에 플러그 도어는 최근 철도차량이 고급화됨에 따라 고속철도에 적용되던 출입문을 전동차에 적용하면서 쓰이게 된 도어시스템으로 승차감 개선에 소음이 중요한 위치를 차지함에 따라 소음에 강한 플러그 도어 시스템이 주목받고 있다. 이러한 이유로 차세대전동차에 적용할 목적으로 전기식 플러그 도어를 개발하여 시험 진행 중에 있다. 플러그 도어를 구성하는 하부 부품으로는 출입문 제어 장치 (DCU : Door Control Unit), 모터, 스크루 기어, 볼 너트, 레일, 리미트 스위치, 각종 전기 장치, 비상 수동 개폐장치, 코디네이션 바 등이 있는데 이중 DCU는 전동차 출입문을 개폐하기 위한 제어장치로 량당 8개인 전동차 출입문이 동시에 열리고 닫히기 위해서는 각 출입문간의 인터페이스가 필요하며, 승객의 승하차와 직접적으로 관련되어 있기 때문에 신뢰성 및 안전성 확보가 매우 중요한 시스템이다. DCU의 기능으로는 자동 문 여닫음 제어, 출입문 제어 및 장애 감지, 출입문 상태 제어, 저전압/고전압 감시 등이 있으며, 본 논문에서는 전기식 플러그 도어에 적용하기 위해 개발된 DCU의 기능, 개발요구사양, 시스템 구성 및 시험결과에 대해 논하고자 한다.

• 보건교육건강증진학회지
• /
• 제18권1호
• /
• pp.35-47
• /
• 2001

As the complexity of the our environment is further complicated by advancements in industry and increase in vehicle traffic flow, the incidents of injury causing accidents are on the rise. Consequently, there is increasing emphasis on the importance of systematic and continual safety education for injury preventive behaviors. This study investigates safety related problems of elementary school students based on the PRECEDE model, proposed by Green et al.(1980 Green), to comprehensively identify the requirements of school safety education. The identified requirements were used to diagnose the current state of elementary school safety education through the analysis of multidimensional factors. A questionnaire survey was conducted on 594 sixth grade students from randomly selected 4 schools in Seoul to examine their injury preventive behaviors and to determine the educational diagnosis variables that affect it. The duration of the survey was 3 weeks starting from April 12, 1999 to May 8, 1999. A summary of the survey results are presented below; 1. Situations in which accidents have occurred were, in their order of frequency, ‘during play or sports activities within the school grounds’ was most frequent at 59.6％, ‘during play on local streets’ at 49.5％, and ‘traffic accidents’ at 41.6％. 2. Categorization of the injury preventive behavior showed that ‘not playing at high traffic flow locations such as streets and construction sites’ had the higher level of observance, while ‘wearing of helmets and joint protection devices during playing’ was least observed. 3. Considering injury preventive behaviors in relation to educational diagnosis variables indicated, for predisposing factors, lower ‘perception to injury accidents’ (p〈0.001) combined with higher ‘concerns for injury accidents’(p〈0.001), ‘practice of preventive behavior’(p〈0.001), and ‘the level of safety knowledge’(p〈0.001) resulted in significantly higher observance of injury preventive behaviors. For enabling factors, higher ‘perceived level of the school safety education’ (p〈0.001) and ‘availability of safety education resources’(p〈0.01) indicated significantly higher observance of injury preventive behaviors. For the reinforcing factor, frequent exposure to ‘safety education brochure’ (p〈0.01) and ‘audio-visual material for safety education’(p〈0.01) combined with more ‘regional safety education’ (p〈0.01), ‘home safety education’ (p〈0.01), ‘school safety education’(p〈0.001), and, ‘parents’ observance of preventive behaviors' (p〈0.001) showed significantly higher observance of injury preventive behaviors. 4. An analysis of the factors that affect injury preventive behaviors showed that the enabling factor ‘awareness of school safety education’ had the highest correlation with injury preventive behaviors followed by factors, in their order of significance, ‘practice of preventive behavior’, ‘perception to injury accidents’, ‘level of safety knowledge’, ‘parents’ observances of preventive behaviors', and ‘concerns for injury accidents.’

• 마이크로전자및패키징학회지
• /
• 제23권3호
• /
• pp.57-61
• /
• 2016

$Cu(In,Ga)Se_2$ (CIGS) 휨성 태양전지의 셀을 보호하기 위하여 스프레이 코팅방법에 의해 수분과 공기로부터의 보호막을 형성하고 그 전기적, 광학적 특성을 평가하였다. 일반적으로 CIGS 휨성 태양전지의 소자층을 보호하기 위해서 EVA(ethylene-vinyl acetate) 필름을 라미네이션 장비를 통하여 여러 겹 보호막을 형성함으로써 복잡한 공정으로 인해 원가상승의 요인으로서 작용한다. 본 연구는 휨성 CIGS 태양전지의 보호막을 라미네이션 박막공정 대신에 간단한 스프레이 코팅공정을 통한 패시베이션(passivation) 박막층을 형성함으로써 CIGS 태양전지 무게의 경량화와 공정시간 단축 연구를 진행하였다. 패시베이션 박막층으로는 PVA(polyvinyl alcohol), SA(sodium alginate) 물질에 $Al_2O_3$ 나노 입자를 첨가하여 유 무기 복합 용액을 사용하였다. 스프레이 코팅된 소자에 비해 에너지 변환 효율특성 62.891 gm/[$m^2-day$]의 비교적 양호한 습기 차단 특성을 나타내었다.