• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.342-349
• /
• 2019

목적: 이 연구의 목적은 구치부 영역에서 임플란트 지지 고정 보철물의 재료에 따른 생존율과 성공률을 후향적으로 조사하는 것이다. 또한 임플란트 지지 고정성 보철물에서 발생하는 합병증의 양상을 관찰하고 실패에 영향을 주는 요인을 평가하는 것이다. 대상 및 방법: 2011년 1월부터 2018년 6월 사이에 전북대학교 치과병원 치과보철과에서 한 명의 보철전문의에 의해 구치부 임플란트 보철 수복을 시행한 환자를 대상으로 하였다. 의료기록을 통해 환자의 성별, 연령, 보철물의 재료, 위치, 유형 및 합병증을 조사하였다. 생존율 및 성공률 분석을 위해 Kaplan-Meier 분석법을 이용하였으며, 집단간 비교를 위해 Log-rank test를 사용하였다. 또한 Cox proportional hazards model을 이용하여 위험요소가 성공률에 미치는 영향을 분석하였다. 결과: 총 245명의 환자에서 364개의 임플란트 보철물이 관찰되었으며, 평균 추적관찰기간은 17.1개월이었다. 전체 임플란트 보철물의 3년, 5년 누적생존율은 각각 97.5%, 91.0%로 관찰되었으며, 총 5개의 임플란트 보철물이 실패하여 제거되었다. 임플란트 보철물의 3년, 5년 누적성공률은 각각 61.1%, 32.9%로 관찰되었으며, 재료, 성별, 연령, 보철물의 위치, 유형은 누적성공률에 영향을 미치지 않았다 (P > .05). 합병증은 인접면 접촉 상실 (53건), 유지력 상실 (17건), 임플란트 주위 점막염 (12건), 저위교합 (4건) 등의 순으로 발생하였다. 결론: 구치부에서 임플란트 지지 고정성 보철물의 높은 누적생존율을 고려할 때, 임플란트는 수복 재료와 상관없이 구치부에서 치아를 대체할 수 있는 신뢰할만한 치료방법으로 생각된다. 그러나 합병증이 빈번히 발생하기 때문에 정기적인 검사와 필요한 경우 수리 및 조정이 매우 중요하다.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.32-40
• /
• 1998

Alveolar ridge augmentation and preservation techniques designed to reconstruct deformed alveolar ridge now occupy a major role in esthetic dentistry. Previously, deformed alveolar ridges were filled with plastic materials(porcelain or resin) of prosthesis to restore ridge contours, which resulted in larger teeth and food impaction under the pontic base. So, prostheses of this type were unacceptable and really detectable when patients smiled. But nowadays, alveolar ridge augmentation procedures enable the dentists to provide patients with fixed prostheses that are esthetic. The development of guided tissue regeneration technique and materials also have made a major impact on extending the scope of therapeutic horizons in dentistry.

• 대한족부족관절학회지
• /
• 제11권2호
• /
• pp.177-181
• /
• 2007

Purpose: The purpose of this study is to compare the two prosthesis that used for total ankle arthroplasty. Materials and Methods: From Sept. 2003 to Jun 2006, 13 patients and 14 ankles that could be follow up more than 1 months. Semiconstrained type (Group I, 7 cases) and Unconstrained type (Group II, 7 cases) were used for total ankle arthroplasty. Mean age was 63.2 year-old, 12 ankles are men and 2 ankles were women. Mean follow up periods were 29 months. The criteria to compare the clinical result were postoperative range of motion, AOFAS score and residual bone stock of medial malleolus. Results: Postoperative range of motion of group I was $43.6{\pm}9.4$ degrees and of group II was $50.7{\pm}7.3$ degrees (p=0.115). Postoperative AOFAS score of group I was $77.1{\pm}13.0$ points and of group II was $86.0{\pm}5.7$ points (p=0.094). Resected bone stock in medial malleolus of group I was $10.7{\pm}2.5\;mm$ and of group II was $5.1{\pm}1.2\;mm$ (p=0.003). Total number of complication in our study was 9 cases. 3 cases were a malleolar fracture, two occurred at intra-operation, the other at follow-up period. Re-operation was done in 6 cases, 3 cases were calcaneal corrective osteotomy, 2 cases were resection of a heterotopic bone and one case was pedicular flap operation for skin problem. Conclusion: In our hospital, mobile bearing type prosthesis shows good result than a semiconstrained type in respect of residual bone stock in medial malleolus. Postoperative range of motion and AOFAS score between two groups shows no significant difference. But small number of patients and short term follow up period is a defect in our study, afterward more population and long term follow up period are needed.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.113-122
• /
• 2000

The reinforced composte resin as the esthetic operative material continuously has been studied because the porcelain fused metal prosthesis is widely used for its excellent esthetics, rigidity and marginal integrity, but it has low fracture resistance against the tensile strength and stress, attrition of the opposite teeth. The reinforced composite resin is well adapt with the dental alloy but it is low the shear bond strength with the dental alloy vs the porcelain fused metal prosthesis, and then has been studied continuously. The purpose of the study was to examine how metal was the higher shear bond strength among the dental alloy was used to the reinforced composite resin and to find the effect that the particle size of sandblasting influenced the shear bond strength. We built up the reinforced composite resin with 4 mm in diameter, 3 mm in height on circular alloy with 5 mm in diameter, 2 mm in height. Type II gold, type IV gold, and Ag-Pd alloy was used as alloys and $50{\mu}m$, $110{\mu}m$, $250{\mu}m$ of the particle size was sandblasted at each alloy in bonding between alloy and resin. We made 90 secimens of 10 per each group and we measured the shear bond strength using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The obtained results were as follows : 1. In comparison among each alloys, Ag-Pd alloy had the highest shear bond strength and the shear bond strength was decreased significantly in the sequence of the type II gold and type IV gold(P<0.001). 2. In comparison according to the size of sandblasting particle, (1) In Ag-Pd alloy, shear bond strength was decreased in the sequence of $110{\mu}m$, $250{\mu}m$, $50{\mu}m$ and there were significant difference in all the group. (P<0.05) (2) In type II gold, it was decreased in the sequence of $250{\mu}m$, $50{\mu}m$, $110{\mu}m$ and there were significant difference. (P<0.05) (3) In type IV gold, it was decreased in the sequence of $110{\mu}m$, $50{\mu}m$, $250{\mu}m$. There were significant difference between the group of $110{\mu}m$ and $50{\mu}m$, the group of $110{\mu}m$ and 250, but there were no significant difference in the group of $50{\mu}m$ and $250{\mu}m$. 3. The highest shear bond strength according to the size of sandblasting particle was $110{\mu}m$ in Ag-Pd alloy and type IV gold, $250{\mu}m$ in type II gold.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.22-25
• /
• 1976

The author has performed a statistical study on the vertical and horizontal distance between maxillary central incisors and incisive papilla, the maxillary intercanine width, and the form of maxillary dental arch. Stone models of maxillary dental arch were made in 403 Korean adults (300 male, 103 female) from 20 to 30. years of age. The results were as follows; 1. The vertical distance between maxillary central incisors and incisive papilla was 6.0mm.. 2. The horizontal distance between maxillary central incisors and incisive papilla was 9.0mm.. 3. The maxillary intercanine width was 37.7mm.. 4. The U type of maxillary dental arch was the greatest percentage with 68.2 %, the percentage for O type was about 21.4% and the V type 10.4%.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.17-22
• /
• 1984

A clinical evaluation was made on teeth in 113 subjects from ages 19 to 23 with Angle's Class I occlusion who were free from prosthesis, orthodontics, and occlusal equilibration. The study was made to determine if there was a relation between the type of occlusion, non-working contact and temporomandibular dysfunction. From the foregoing study, the author obtained the following results. 1. In lateral excursion, there was not any significant difference between bilateral canine protected occlusion (31%), bilateral group function (32.7%), and mixed type (34.5%). 2. Only 10 of 113 subjects studied had non-working side tooth contacts (8.2 per cent). 3. Twenty per cent of subjects with non-working side contact showed temporomandibular joint dysfunction. 4. Non-working side contacts were not observed in subjects with canine guided occlusion. 5. It would be premature to relate the type of occlusion on working side directly to temporomandibular joint dysfunction.

• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.207-212
• /
• 1988

Maxillary defects are a result of necessary cancer surgery, congenital anomaly or trauma. Ideally the patient with the aquired maxillary defect should be provided with an obturator prosthesis that is comfortable, restores adequate speech, deglutition, and mastication, and is acceptable cosmetically. This is a case report of open type hollow obturator delivered in the partial maxillectomy treated patient. The satisfied result obtained as follows: The open type hollow obturator has the advantage of easy fabrication, lightness, easy cleaning and restores adquate speech.

• 대한치과보철학회지
• /
• 제48권1호
• /
• pp.28-40
• /
• 2010

연구 목적: 임플란트의 성공과 실패는 숙주 관련 요인, 위치 관련 요인, 수술 관련 요인, 임플란트 관련 요인, 수복물 관련 요인 등 다양한 인자에 의해 결정된다. 본 연구는 그 중 임플란트의 식립 위치, 골질, 임플란트 표면, 길이 및 직경, 초기 안정성, 보철물 유형이 생존율에 미치는 영향을 평가하여, 임플란트의 예후를 예측하는데 도움을 주고자 한다. 연구 재료 및 방법: 1991년 2월부터 2009년 5월 사이에 연세대학교 치과대학병원에서 5인의 외과의가 임플란트 수술을 시행하고, 1인의 보철 전문의에 의해 보철 수복이 이루어져 적어도 6개월 이상 보철물에 대한 주기적인 검사가 이루어진 879명환자, 2796개의 임플란트에 대한 후향적 연구를 시행하였다. 진료 기록부 및 방사선 사진을 통해 환자의 식립 당시 나이와 성별, 임플란트의 제조회사, 표면, 직경 및 길이, 식립 부위 및 골질, 초기 안정성, 보철물의 유형, 생존 기간에 관한 자료를 수집하였다. 이를 통해, 임플란트의 성공과 실패에 영향을 미치는 국소 인자의 유형, 분포 및 국소 인자와 생존율 간의 관계를 연구하였다. 생존율 분석은 Kaplan-Meier 생존 분석법을 이용하였으며, 평가 인자 내 항목들의 생존율 비교는 Chi-square test를 사용하였다. 또한, 임플란트의 실패 위험성을 평가하기 위해 오즈비 (odds ratio)를 구하였다. 결과: 1. 총 879명에게 식립된 2796개의 임플란트 중 150개가 실패하여 누적 생존율은 94.64%로 나타났다. 그 중 기계 절삭 표면 임플란트의 누적 생존율은 91.76%, 거친 표면 임플란트의 누적 생존율은 96.02% 이었다. 2. 식립위치, 임플란트의 표면 특성, 기계 절삭 표면 임플란트의 직경, 초기 안정성, 보철물 유형, 환자의 연령 및 성별이 생존율에 미치는 영향은 통계학적으로 유의하였다 (P<.05). 3. 식립 부위의 골질, 임플란트 제조사별 거친 표면 특성, 임플란트의 길이 및 기계 절삭 표면을 제외한 거친 표면 임플란트의 직경이 생존율에 미치는 영향은 통계학적으로 유의하지 않았다 (P>.05). 4. 특히, 실패율이 높은 경우는 상악 구치부에 식립 시 (8.84%), 기계 절삭 표면의 임플란트 식립 시 (8.24%), 기계 절삭 표면 임플란트 중 wide 직경을 사용하는 경우 (14.47%), 초기 고정이 불량한 경우 (28.95%), 상악에 implant retained overdenture (기계 절삭 표면 26.69%; 거친 표면 10%) 및 telescopic denture (기계 절삭 표면 100%; 거친 표면 27.27%)로 수복하는 경우, 60-79세 환자에게 식립하는 경우 (6.90%), 남성에게 식립하는 경우 (6.36%) 이었다.

• 복식
• /
• 제51권3호
• /
• pp.5-18
• /
• 2001

The purpose of this study is to suggest size specifications for the development of mastectomy bras and breast prostheses. To collect anthropometric data, 250 middle aged women's body measurement were taken and the data were analyzed by statistical methods such as ANOVA, correlation analysis, factor analysis and cluster analysis. The results of the analysis of measurement data showed that lengths. breadths, depths, circumferences are increased significantly when getting older. The results of the correlation analysis showed that there was no direct linear relationship between chest circumference and cup size. From 29 measurements, 4 factors were selected as key factors by the tractor analysis and the breast type were classified into 2 groups by cluster analysis. To set up sizing systems for the mastectomy brassiere, chest circumference and cup size were selected and the loss function was used to decide Intervals of each of them. 6 sizes from chest circumference and 4 sizes from cup sizes were picked, Breast breadth, breast length and breast height were chosen to establish sizing systems for the breast prosthesis. To decide intervals of each of them, the loss function was used and 8 sizes from composition of the 3 factors were picked.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.209-216
• /
• 2004

The purpose of this study is to introduce how to make implant supported over denture with Oring. Many kinds of attachments have used to dental restorations. The application of attachment has widely increased implant fixed prosthesis and implant supported over denture. In order that implant supported over denture have properly retention, generally used O-ring, magnetic, bar attachment. O-ring give us an advantage that is required more minimum vertical dimension than bar-type and easily replace with new part. When we make these prosthesis using O-ring, Bar, Ball attachment, we should following procedures. Strong occlusion force leads to fracture of over denture because part of functional mechanism as implant abutment or attachment is spaced. Clips are regularly activated. O-ring and springs are changed every year. The pattern of resorption should be carefully monitored and compensated for by relining procedures. If the over denture appears to rest on the bar or the ball attachments, relining should be performed and clips/caps should be changed.