• 제목/요약/키워드: Prosthesis fitting

검색결과 25건 처리시간 0.037초

발목관절 조절각도가 절단환자의 보행에 미치는 영향 (Influence on Amputee Gait by the Ankle Joint Alignment)

  • 장윤희;양길태;임송학;문무성;김영호
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권4호
    • /
    • pp.403-416
    • /
    • 1998
  • 본 연구는 대퇴 및 하퇴 의족 착용자의 소켓의 적합성 및 기능성을 평가하기 위하여 소켓내부압력을 측정하였다. 발목관절을 중립, 배굴, 저굴 상태로 조절하였을 때, 배굴 및 저굴에 비하여 중립상태에서 분속수나 보행속도는 증가 하였다. 다른 보행 인자들 역시 발목관절을 중립상태로 조절하였을 때 정상인의 보행인자에 근접하고 있다. 대퇴 절단 환자의 경우 발목관절을 배굴 상태로 조절하면 소켓의 외측부분에 압력집중이 나타나고, 저굴상태로 조절하면 소켓의 내측 부분에 압력집중이 발생하였다. 하퇴 절단 환자의 경우 발목관절을 배굴상태로 조절하면 중간입각기때 소켓의 전면 외측에 압력집중 현상이 나타나며, 저굴시에는 배굴시와 같은 위치에 약간의 압력이 증가하는 것으로 나타났다. 본 연구는 의족의 부적절한 정렬상태로 인한 소켓내에서의 압력집중 현상을 설명하고자 하였으며, 의족의 올바른 정렬은 적절한 보행을 유도하기 위한 소켓과 스텀프와의 접촉 상태를 결정하는데 있어 매우 중요한 인자중 하나이다.

  • PDF

Comparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systems

  • Ha, Seok-Joon;Cho, Jin-Hyun
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권6호
    • /
    • pp.439-448
    • /
    • 2016
  • PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

Analysis of the trueness and precision of complete denture bases manufactured using digital and analog technologies

  • Leonardo Ciocca;Mattia Maltauro;Valerio Cimini;Lorenzo Breschi;Angela Montanari;Laura Anderlucci;Roberto Meneghello
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권1호
    • /
    • pp.22-32
    • /
    • 2023
  • PURPOSE. Digital technology has enabled improvements in the fitting accuracy of denture bases via milling techniques. The aim of this study was to evaluate the trueness and precision of digital and analog techniques for manufacturing complete dentures (CDs). MATERIALS AND METHODS. Sixty identical CDs were manufactured using different production protocols. Digital and analog technologies were compared using the reference geometric approach, and the Δ-error values of eight areas of interest (AOI) were calculated. For each AOI, a precise number of measurement points was selected according to sensitivity analyses to compare the Δ-error of trueness and precision between the original model and manufactured prosthesis. Three types of statistical analysis were performed: to calculate the intergroup cumulative difference among the three protocols, the intergroup among the AOIs, and the intragroup difference among AOIs. RESULTS. There was a statistically significant difference between the dentures made using the oversize process and injection molding process (P < .001), but no significant difference between the other two manufacturing methods (P = .1227). There was also a statistically significant difference between the dentures made using the monolithic process and the other two processes for all AOIs (P = .0061), but there was no significant difference between the other two processes (P = 1). Within each group, significant differences among the AOIs were observed. CONCLUSION. The monolithic process yielded better results, in terms of accuracy (trueness and precision), than the other groups, although all three processes led to dentures with Δ-error values well within the clinical tolerance limit.

Silane의 처리시기와 타액오염이 도재-레진 시멘트의 전단 결합강도에 미치는 영향 (The effect of silane treatment timing and saliva contamination on shear bond strength of resin cement to porcelain)

  • 노영선;류재준;서규원
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.61-69
    • /
    • 2009
  • 서론: 인접 자연치와 아름답고 자연스런 조화를 이루는 심미적 치료를 위해 도재 수복물은 대중적인 치료방법의 하나로 잡고 있다. 임상에서 도재 수복물이 제작 후 치아에 시멘트로 접착을 하기 전 먼저 구강 내에서 시적할 때 수복물 표면에 타액, 혈액, 시적용 시멘트 등으로 인해 오염될 수 있다. 연구 목적: 이 연구의 목적은 도재 수복물로 사용되고 있는 라미네이트 도재에 실란 결합제의 처리 시기를 달리할 때와 도재 수복물을 치아에 시적 할 때 타액의 오염여부가 실란 결합제의 물리적, 화학적 반응성에 미치는 영향을 관찰하여 도재와 레진 시멘트 사이의 결합력의 안정성을 평가하는 것이다. 연구 재료 및 방법: 라미네이트용 도재를 360개의 원반모형과 5개의 정사각형 모형으로 제작하여 20군으로 나눈다. 각 군에 표면처리를 달리 한 뒤 푸리에 적외선 분광계, 접촉각 측정기와 인스트론 만능 시험기를 이용해 화학적, 물리적 비교를 하였다. 통계는 각 군의 전단 결합 강도의 유의성을 검증하기 위하여 일원분산분석(ANOVA) 후 사후검정은 던넷 다중비교 (Dunnett's multiple comparison)를 시행하였다 (P > .05). 연구 결과: 푸리에 적외선 분광 자료에 의해 본 타액 오염 및 실란의 처리 시기에 따른 화학적 변화는 크지 않았다. 접촉각은 타액 오염 후 낮아졌으나 인산으로 산 부식 후 각도가 증가하였다. 전단 결합강도값은 열 순환후의 군에서 미리 실란으로 보호한 경우에 유의한 차이가 있었다. 결론: 수복물의 내구성에 영향을 미치는 다양한 구강환경과 유사한 조건에서 수복물의 물성평가를 같이 고려해 볼 때 실란 결합제를 이용한 수복물의 접착시 실란 결합제를 수복물에 미리 도포하여 일정시간의 경과 후 수복물을 접착하며, 타액 오염이 발생할 경우 인산으로 수복물을 세척하는 것이 유용한 방법 임을 알 수 있었다

안면 비대칭환자의 악교정 수술을 동반한 완전구강회복 (Full mouth Rehabilitation with Orthognathic Surgery in Facial Asymmetry Patient : Case Report)

  • 임소민;신형주;김대곤;박찬진;조리라
    • 구강회복응용과학지
    • /
    • 제26권3호
    • /
    • pp.359-371
    • /
    • 2010
  • 안면 비대칭 중 가장 흔히 나타나는 하악 비대칭은 성장 중 골격성장의 비대칭을 유발하는 다양한 원인에 의해 발생한다. 안면 비대칭이 있을 경우 외모 뿐 아니라 저작과 기능에 지장을 줄 수 있다. 심한 골격성 악간관계 부조화가 있는 경우 보철치료만으로는 이상적인 교합관계를 형성하기 어려우며, 힘의 분산이 적절히 이루어지지 않아 자연치와 수복물의 수명이 단축될 수 있다. 악간관계 부조화로 인한 부정교합이 존재하여 치아의 수복 시 예후가 불량할 것으로 예상되는 경우 먼저 교정치료를 통한 악간관계의 개선을 위한 교합안정이 우선되어야 한다. 부조화가 심한 경우 기능적 및 심미적인 치료 결과를 위해 악교정 수술이 필요하며, 진단결과에 따라 편악 또는 양악수술이 시행된다. 상 하악 또는 안면 비대칭증의 악교정 수술시 이부 성형술이 동반될 수 있으며, 이는 하악골의 이부의 수직적, 횡적, 전후방적 위치를 외과적으로 변화시킴으로써 더욱 심미적인 안모개선을 얻기 위해 시행된다. 본 증례의 환자는 안모의 비대칭과 돌출된 하악 및 불량 보철물을 개선하고자 술전 교정을 시행한 뒤 상악 Le-Fort I 골절단술, 하악 시상분할골절단술, 이부 성형술(전방 4 mm), 우측 하악각 증대술을 시행하였다. 술후 교정치료를 진행하고 치관연장술 및 완전구강회복을 진행하였다. 보철 수복 완료 후, 환자의 평가와 객관적 결과로 만족할만한 결과를 얻었기에 이를 보고하고자 한다.