• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2323-2328
• /
• 2011

There have been many changes in Subway train types since SeoulMetro opened the Line No.1 in 1974. Propulsion control device has changed many times following the generations of control method from resistance control method which uses large resistor for the traction motor control to chopping control which uses power semiconductors and finally to inverter control. Railroad vehicle propulsion control device refers to devices such as converter/inverter which supply power for subway operation, power conversion equipment like small switching-mode power supply and traction motor. In this paper, we will analyze every part of railroad vehicle propulsion control device of SeoulMetro so we can find problems in the subway operation. And we will present propulsion control device model which makes minimized failures, efficient maintenance possible when replacing railroad vehicle later. By doing this, we hope to ensure stability and improve energy efficiency to the top.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1528-1534
• /
• 2015

This paper designed the railway vehicle running device with a proto-type for the railway vehicle maintenance training and developed a propulsion control device simulator equipped the imitation steering wheel. In addition, this paper applied a multi-thread technology in order to implement the staged fault and the propulsion control device protected operation test and an implementation of the failure that occur in actual rail vehicle and confirm the validity as the propulsion control device simulator for the maintenance training.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.113-116
• /
• 2015

Generally, in the railway vehicle the driving force of gravity happens by the high-speed running and the repetitive impulse cause the degradation and the malfunction phenomenon shows differently because the durability of each component changes according to the internal and external causes. The maintenance of propulsion control device which is played the very important role as to the stable service of the railway vehicle is greatly important among them. Therefore maintenance training propulsion control device simulator is needed to maximize learning through repetition and improve the maintenance practical skills training. This paper designed the railway vehicle running device with a miniature for the railway vehicle maintenance training and developed a propulsion control device simulator equipped the imitation steering wheel.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.3-6
• /
• 2007

본 논문에서는 화약작동식 밸브 개발에 관해 전반적으로 설명하였다. 화약작동식 밸브는 추진기관의 연료와 공기를 조절하는 파이로장치이므로 신뢰도를 확보하는게 무엇보다도 중요하다. 그러므로, 해석과 성능시험을 통해 작동 신뢰도를 증가시키는데 역점을 두었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권2호
• /
• pp.121-125
• /
• 2007

In late 1960's, engineers of the engine manufacturer experienced that the distortion of inlet flow of turbofan and turbojet engine could cause the surge in compressor and affect overall engine operational performance, which result in the deterioration of stability of the engine. In this study, block type of inlet distortion simulating device has been developed in order to investigate the effect of inlet distortion on the deterioration of overall engine operational performance. The inlet distortion simulating device was installed in front of engine inlet in order to simulate distortion of inlet flow. The degree of inlet distortion was measured by rakes installed upstream the inlet distortion simulating device and between the engine inlet and inlet distortion simulating device. Before applying the inlet distortion simulating device to real engine, preliminary tests were performed with a simulated engine in order to verify the degree of inlet distortion by the device. Preliminary inlet distortion tests were performed in Altitude Engine Test Facility(AETF) of Korea Aerospace Research Institute(KARI) and results showed that the inlet distortion simulating device could be used in simulating various inlet distortion cases.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.78-83
• /
• 2014

항공기 또는 유도무기와 같은 고속 비행체의 가압식 연료탱크에는 연료가 한 방향으로 몰려 이송이 단절되는 것을 방지하기 위해 특별한 유로개방장치가 필요하다. 이러한 필요에 의해 가속도추종 방식의 유로개방장치가 발명되었으며 본 논문에서는 이 장치의 구동성능을 예측하고 성능에 영향을 미치는 주요 파라미터의 선정을 위해 동역학 해석 프로그램인 RecurDyn을 이용해 해석을 수행하였다. 해석결과를 통해 장치의 내부 균형추가 연료의 쏠림을 잘 추종해 유로를 개방시키는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.416-423
• /
• 2012

액체추진제 공급시스템의 액체포집장치는 추진기관으로 기포가 유입되는 것을 방지하는데 사용한다. 액체포집장치는 차단막의 미세 구멍의 모세관 효과를 이용하여 추진기관에 순수 액체만을 공급한다. 기포점은 액체포집장치의 설계에서 가장 중요한 설계변수이다. 본 논문에서는 문헌조사를 통해 액체포집장치의 성능에 영향을 미치는 변수들을 식별하고 기포점 측정 시험 장치를 구성하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.616-617
• /
• 2010

추력조절이 용이한 SNECMA의 추력기에 대해서 수치해석 기법으로 분석하였다. 특허에 제시된 Aerospike 노즐의 형상은 고도에 따라 최적의 추력이 가능하도록 설계되었다.

• Journal of Ship and Ocean Technology
• /
• 제9권2호
• /
• pp.11-20
• /
• 2005

A mixed-flow pump is largely applied for waterjet propulsion in high-speed vessels because of excellent cavitation performance. For the present study, we analyze the performance of mixed-flow pump, which is composed of impeller and stator. The test device for a mixed-flow pump was installed in the test section in the KRISO cavitation tunnel. The performance tests of two mixed-flow pumps were carried out with the test device at various flow rates using various nozzles. The test results agree fairly well with the predicted results by commercial CFD code. The test device is available for verification of impeller performance together with CFD analysis

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.381-385
• /
• 2005

최근 우주 개발 기술은 "더 빠르고, 저렴하고, 효율적인"으로 표현할 수 있다. 이런 장치들 사이에서 마이크로 추진 장치는 필수적인 요소이다. 또한 마이크로 노즐은 마이크로 추진 장치에서 가장 중요한 부분이다. 냉가스 추력기의 경우, 마이크로 노즐은 팽창비의 변화를 통해 압축 가스내의 저장된 에너지를 운동에너지로 변환시킨다. 본 논문에서는 노즐 팽창비와 비열비에 따른 마이크로 노즐의 특성을 실험하였다. 추력은 추력 측정 장치에 부착한 스트레인게이지를 사용하여 측정하였다. 또한 실험을 통해 마이크로 노즐의 성능을 평가해보았다.