• 한국항해항만학회지
• /
• 제41권6호
• /
• pp.373-380
• /
• 2017

해양사고 원인의 대부분을 차지하고 있는 인적오류에 의한 운항과실에는 관련 지식의 결여, 잘못 이해하고 있는 지식, 적용절차의 미숙 등을 들 수 있다. 최근 해양경찰 경비함정에 장착되고 있는 추진기 형태를 살펴보면, 해상치안 수요에 따라 다양화 되고 있는 추세이다. 특히, 소형 경비정에 주로 장착되었던 워터제트 추진기가 중대형 경비함으로 점차 확대되어 전체 함정의 50%에 이르고 있으며, 축 형식은 2에서 4축, 버켓 유형도 전후진과 조향 제어방식이 전혀 다른 '이중역전버켓'과 '단일역전버켓' 방식으로 구분된다. 이러한 운항체계의 다양화는 운항자의 인적과실 요인을 증가시킬 수 있다. 그러나 워터제트 유형별 고유의 특성에 알맞은 조종법의 연구는 부족한 편이다. 이 논문에서는 워터제트 유형별 후진성능을 기반으로 외력의 도움 없이 해양경찰 전용부두의 요건에 적합한 횡이동 방법을 분석하였다. 이어서, 선박조종시뮬레이터를 활용하여 실험하고, 실험이 곤란한 워터제트 방식 함정은 함정장들의 인터뷰를 통하여 비교 검증하였다. 이를 기반으로 워터제트 운항 지식의 올바른 습득과 기술적 측면의 인적오류를 최소화하여 해상치안활동에 기반인 함정의 안전운항에 기여하고자 한다.

• 한국추진공학회지
• /
• 제26권4호
• /
• pp.54-63
• /
• 2022

500 kg의 페이로드를 500 km 태양동기궤도에 이송가능한 소형발사체의 상단에 사용될 3톤급 액체로켓엔진을 설계하고 있다. 소형발사체의 1단에는 비행시험으로 검증된 75톤급 엔진을 사용한다. 상단용 엔진은 액체산소와 액체메탄을 연료로 사용되는데, 이 추진제 조합은 공통격벽탱크를 적용하여 무게 감소가 가능하고 비추력도 높다. 상단엔진의 사이클로는 저압으로 운용되어 신뢰성이 높은 팽창식 사이클을 채택했으며, 노즐 확대비 120이상에서 360초를 상회하는 비추력 성능을 보일 것으로 평가되었다. 엔진의 주요구성품인 연소기와 터보펌프는 목표 비용을 맞추기 위하여 적층제조된다. 엔진은 자가증기가압과 롤추력제어를 위하여 가열된 증기메탄을 제공하고, 이러한 기능을 가진 상단 추진기관시스템은 심우주탐사 등 다양한 임무에 확대 적용 가능할 것으로 기대된다.

• Journal of Ship and Ocean Technology
• /
• 제11권2호
• /
• pp.1-9
• /
• 2007

This paper describes the design and development of a hovering AUV constructed at Cheju National University and analyses the dynamic performance of the vehicle using simulation programs. The main purpose of this AUV is to carry out fundamental tests in its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general ROV appearance for underwater works and its dimensions are 0.75m*0.5m*0.5m. It has 4 thrusters of 450 watts for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an appropriate environment for developing various algorithms needed for developing and advancing Hovering AUV.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.322-329
• /
• 2006

In the last decade, the increasing restrictions imposed on the exhaust emissions from internal combustion engines and traffic limitations have increased the development of electrical propulsion systems for automotive applications. The goal of electrical and hybrid vehicles is the reduction of global emissions, which in turn leads to a decrease in fuel resource exploitation. This paper presents a novel approach for control of Induction Motors (IM) using the Particle Swarm Optimization (PSO) algorithm to optimize the parameters of the Proportional Integral Controller (PI-Controller). The overall system is simulated under various operating conditions. The use of PSO as an optimization algorithm makes the drive robust and insensitive to load variation with faster dynamic response and higher accuracy. The system is tested under variable operating conditions. The simulation results show a positive dynamic response with fast recovery time.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1022-1028
• /
• 2008

This article presents an omni-tread snake robot that designed to locomote on narrow space and rough terrain. The omni-tread snake robot comprises three segment, which are linked to each other by 2 degrees of freedom joints for the pitch and yaw motion. Moving tracks on all four sides of each segment guarantee propulsion even when the robot rolls over. The 2 DOF joint are actuated by 2 servo motors which produce sufficient torque to lift the one leading or trailing segments up and overcome obstacles. This paper applies articulated steering technique to get omni-tread snake robot's kinematics model.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.499-508
• /
• 2017

The ionic polymer-metal composite (IPMC) is an electroactive polymer material and has a promising potential as actuators for propulsion and locomotion in underwater systems. In this paper a physics based model is used to analyse the actuation dynamics of the IPMC propulsor. Moreover, proportional-integral (PI) controller is used for position control of the tip displacement of IPMC propulsor. PI parameter tuning is performed using particle swarm optimization (PSO) algorithm. Several performance indices have been used as an objective function to optimize the error of the system. Finally, the best tuning method is found out by comparing the results under various performance indices.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.521-524
• /
• 2005

To protect a satellite and electronic equipment from the acoustic loads generated by rocket propulsion system, many launch vehicle use acoustic blanket. Most high frequency region of the acoustic loads is reduced by nose fairing skins and acoustic barrier, but low frequency region is not. In order to control low frequency acoustic mode, we designed away resonator panel which was made of composite materials. This paper shows the absorption coefficient measurement result of resonator and SPL(Sound Pressure Level) reduction by using resonators in a rectangular cavity for experiment. Proper arrangement of acoustic resonators at each mode reduce effectively SPL around the satellite through changing boundary condition.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.68-73
• /
• 1998

The propulsion diesel engine have been widely applied with a mechanical governor to control the truck speed for a long time. But it was recently very difficult for mechanical governor to control the speed of long stock and diesel engine of truck because of hunting by dead time between fuel injection and power output. This study is aimed to configure the modeling for performance simulation regarding to diesel truck operation which could be suppressed for hunting. The modeling have been made on the base of dynamic characteristic such as electronic governor, injection of fuel system and operating states of diesel engine truck. Real model system have been introduced for deciding reacting parameters and for the comparison of resulting performance in simulation. In results of simulation, we obtained items which diesel truck drives for suppressed hunting.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.878-884
• /
• 2015

In this paper, Power Management System(PMS) simulator for Liquid Nature Gas Carrier(LNGC) is developed. Major components of power system for LNGC, such as generator, diesel engine and governor, transformer, circuit breaker, and 3 phase loads models are built based on MATLAB/SIMULINK. With these designed major parts, PMS simulator modeling is carried out. Based on MATLAB/Graphical User Interface, PMS simulator control for LNGC, and Human Machine Interface for monitoring is designed. PMS simulator for LNGC carries out simulation according to sequence of characteristics analysis. By comparing results of predicted simulation for each sequence to that of characteristics analysis, the reliability of PMS simulator for LNGC will be verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1856-1857
• /
• 2006

The existing automation transfer systems such as AGV(Automated Guided Vehicle) have many problems (maintenance, accuracy, velocity, etc.) and wastes of a vast space and time. Hence we have suggested to LMTT(Linear Motor-based Transfer Technology). This paper deals with fundamental LMTT, and proposes a concept of mass reduction and propulsion control for LMTT when it is starting and reaching an object by using lift-force. By applying optimal controller and the repulsive lift forte in the LMTT, a large percent of vehicle weight is compensated and it reduces friction, then it needs less thrust force to propel the vehicle.