• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.114-119
• /
• 2004

For passenger vessels, twin shaft types in propulsion system is generally adopted to provide a high-speed performance in low draught due to restricted operating condition in harbors or water channels. Struts of twin open shaft type support the shafts, bearings, and propellers. Therefore, strut design is needed to consider not only hydrodynamic performance but also structural and noise/vibration performance, In this paper, considerations in strut design at the initial design stage have been discussed based on existing references, numerical calculations, and their comparisons. Also, the strut design of a RoPax ferry has been carried out at the initial design stage, for an example.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.463-468
• /
• 2011

The prospect of Arctic trade transportation opening on a year-round basis creates a vast opportunity of exploring untapped resources and shortened navigational routes. However, the environment's remoteness and lack of technical experiences remains a big challenge for the maritime industry. With this, engine designers and makers are continually investigating, specifically optimizing propulsion shafting system design, to meet the environmental and technical challenges of the region. Further, classification societies recognize the need to upgrade the Unified Rules concerning elements to meet current Polar requirements. Hence in this paper, excitation torque calculation on Polar class vessels propulsion shafting system will be reviewed. The propeller - ice interaction load effect, which is a main consideration of excitation source of Polar Class propulsion shafting system, on shaft design calculation will be analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권2호
• /
• pp.35-47
• /
• 1990

The natural frequency of lateral vibration for ship's propulsion shafting tends to become lower as the relative stiffness of supproted system of the propulsion shafting decreases and the weight of shafting increases. Especially, the propulsion shafting of high-power ships such as car ferries, roll-on/roll-off, and container ships are susceptible to lateral vibration for their resonant speeds are happened to be in ordinary operating speed ranges. So far, many papers on the lateral vibration of ship's propulsion shaftings are published but they treated mainly special cases and not explained explicitly the calculation process. In this paper, the calculation processes of undamped and also forced damped lateral vibration by the transfer matrix method are presented and the calculation programs are developed. With the developed computer programs, a ship's propulsion shafting which was introduced on the published paper is analyzed for its lateral vibration and also the lateral vibration of the main drive shaft for a lathe is calculated to show the availiability of developed computer programs.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.259-259
• /
• 2017

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.447-455
• /
• 2016

Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.

• 한국추진공학회지
• /
• 제8권3호
• /
• pp.17-26
• /
• 2004

본 연구에서 동력 전달 시스템은 분리 축 방식의 가스 터빈 엔진의 축 동력을 발전기 전력으로 변환하여, 이것을 프로펠러를 구동하는 추력 모터에 공급하는 방식으로 구성되어있다. 여기에 사용된 가스 터빈 엔진은 엔진 축 마력 317shp(236kw)을 약110kw (147shp)으로 플랫 레이팅(flat rating) 하여 운용한다. 본 시험 장치의 엔진은 가스 터빈엔진 출력축과 발전기 사이에 부하 변화 시 댐핑(damping)역할을 할 수 있도록 플라이 휠(flywheel)을 장착하였다. 이 때 플라이휠의 적절한 관성 모멘트가 고려되지 않으면, 발전기와 모터는 부하 상승에 의한 엔진으로부터 요구되는 출력을 얻을 수 없으며, 또한 엔진이 정상적으로 작동하지 않음을 확인할 수 있다. 따라서 제공된 엔진 데이터와 엔진 시험 데이터로부터 동역학적인 천이 효과에 의한 성능 분석을 함으로써 관성 모멘트의 요구 범위를 결정하였다. 재설계한 플라이휠을 장착 시험한 결과, 본 시스템에서 요구한 출력을 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제4권1호
• /
• pp.2-22
• /
• 1980

In the earlier days, when the diesel engine was used for ship propulsion, its shaft had often been broken by uncertain causes. Bauer suggested, for the first time in 1900, that it resulted from the torsional vibration of the shaft system. From 1901 to 1902, Gumbel and Frahm found out that shaft failures were caused by the resonance of the shaft system in critical speed. Since that time, valuable theories, empirical formulae and methods of vibration analysis were introduced by many investigators such as Geiger, Holzer, Lewis, Carter, Porter, Constant, Timoshenko, Dorey, Den Hartog, Tuplin, Ker Wilson, Bradbury etc. But, as the calculation of the damping energy involves very complicated and uncertain factors, the estimated amplitude of the torsional vibration is incorrect and uncertain. Besides, as high-powered engines have been installed on large vessels or special vessels and exciting force has been increased, new problems of the torsional vibration have continuously occurred. Although we can calculate the approximate natural frequencies or estimate their amplitude and additional stress in the design stage, through the above mentioned studies, the results of the calculations are unsatisfactory, and so much time is needed to carry out the calculation by hand. The authors have developed a computer program to calculate its natural frequencies, the amplitudes and additional stresses of the torsional vibration in the marine diesel engine shafting. In developing the computer program, the authors have paid the special attention to the calculation of the damping energy. To verify the reliability of the developed computer program, the torsional vibration of several propulsion shaftings which are driven by the diesel engine has been analyzed. The results calculted by the authors' computer program show good agreements with those of the actual measurements and are better than the results of engine maker's calculation.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.119-125
• /
• 2007

현재 중소형선박의 동력전달용 스테인리스 추진축계가 많이 사용되고 있으나 선미를 통과하는 선미관 패킹부, 베어링이 작용하는 접촉부 등에서 마모, 축의 재질불량이나 설계 불량으로 인하여 축이 절손되는 경우가 많다. 프로펠러축이 과다마모 또는 절손으로 파단시 새로운 축으로 전환하고 있으나 축을 새것으로 구입하려면 주문, 제작 등에 따라 상당한 비용이 소요된다. 또한 축을 육성 용접하는 경우는 해양수산관청의 승인을 득하도록 되어 있으나 지금까지 승인이 된 경우가 없었다. 따라서 이 연구에서는 직접 스테인리스 재료를 육성 용접하면서 모재와 비교하여 용접에 따른 금속조직의 변화, 결함의 계측 등을 규명하여 해양수산관청의 승인에 필요한 용접 절차, 검사에 필요한 사항 등을 검토하였다.

• 한국추진공학회지
• /
• 제5권4호
• /
• pp.31-39
• /
• 2001

복합재료로 제작이 되는 수송기계용 추진축은 진동, 소음, 중량 등을 감소시킬 수 있는 장점을 가진다. 본 연구에서는 유한요소법을 이용하여 카본/에폭시 복합재료로 구성된 추진축을 설계하였으며 필라멘트 와인딩 방법을 사용하여 시험용 시편을 제작하였다. 유한요소법을 이용한 추진축의 설계 방법의 정확성을 확인하고자 FFT 해석기와 충격해머를 이용한 고유진동수 측정시험과 임계회전속도 측정 실험 장비를 이용한 임계회전속도 측정시험을 수행하였다. 해석결과와 시험결과를 비교하였을 때 오차율은 3.4%이하로 해석결과의 신뢰성을 확인하였다. 이러한 FEM 설계방법을 이용하여 추진 축의 진동 및 강도특성에 영향을 미치는 요인들에 대한 연구를 수행하였다 여러 요인들 중 중량의 증가 없이 고유진동수 변화에 가장 큰 영향을 미치는 것은 와인딩 각도임을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.328-336
• /
• 1998

Marine reduction gears are usually used to increase the propulsion efficiency of propellers for ships powered by medium and small sized high speed diesel engines. Most of shaft systems adopt flexible couplings to absorb the transmitted vibratory torque from the engines to the reduction gears and to prevent the chattering phenomenon of reduction gears. However some elastic couplings show non-linear characteristics due to the variable torque transmitted from the main engines and the change of ambient temperature. In this study dynamic characteristics of flexible couplings sare investigated and their effects upon various vibratory conditions of propulsion systems are clarified. A calculation program of torsional vibration for the propulsion systems are clarified. A calculation program of Results of the program developed are compared with ones of the existing linear method and propulsion systems with the elastic couplings the transfer matrix method is adopted which is found to give satisfied results.