• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.175-184
• /
• 2009

In this paper, a method for optimal measurement placement in the problem of static harmonic state estimation in power systems is proposed. At first, for achieving to a suitable method by considering the precision factor of the estimation, a procedure based on Genetic Algorithm (GA) for optimal placement is suggested. Optimal placement by regarding the precision factor has an evident solution, and the proposed method is successful in achieving the mentioned solution. But, the previous applied method, which is called the Sequential Elimination (SE) algorithm, can not achieve to the evident solution of the mentioned problem. Finally, considering both precision and economic factors together in solving the optimal placement problem, a practical method based on GA is proposed. The simulation results are shown an improvement in the precision of the estimation by using the proposed method.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.112-115
• /
• 2010

The heart rate is the most important vital sign in diagnosing heart status. The simple method to measure the heart rate in the mobile healthcare device is using the PPG signal. In developing the mobile healthcare device using the PPG signal, the most important issue is the inaccuracy of the measured heart rate because the PPG signal is distorted from the user's motions. To improve the problem, this study proposed the new method that is to estimate the heart rate without an additional sensor in real life. The proposed method in this study is using the histogram filter. In order to evaluate the performance of the proposed method, the study compares its results with the moving average method in motion environment. According to the experimental results, the performance of the proposed method was more than 40% better than the performances of the MAF.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1608-1617
• /
• 2018

The rapid and correct isolation of faulty submodules (SMs) is of great importance for improving the reliability of modular multilevel converters (MMCs). Therefore, a fast diagnosis method containing fault detection and fault location determination was presented in this paper. An improved incremental predictive model of arm current was proposed to detect failures, and the multi-step prediction method was used to eliminate the negative impact of disturbances. Moreover, a control method was proposed to strengthen the fault characteristics to rapidly locate faulty arms and faulty SMs by detecting the variation rate of the SM capacitor voltage. The proposed method can rapidly and easily locate faulty SMs under different load conditions without the need for additional sensors. The experimental results have validated the effectiveness of the proposed method by using a single-phase MMC with four SMs per arm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.930-937
• /
• 2009

The estimation method of the fracture resistance curve for the pipe specimen was proposed using the load ratio method for the standard specimen. For this, the calculation method of the load - CMOD curve for the pipe specimen with the common format equation(CFE) was proposed by using data of the CT specimen. The proposed method agreed well with experimental data. The J-integral value and the crack extension were calculated from the estimated load - CMOD data. The fracture resistance curve was estimated from the calculated J-integral and the crack extension. From these results, it have been seen that the proposed method is reliable to estimate the J-R curve of the pipe specimen.

• Smart Structures and Systems
• /
• v.11 no.1
• /
• pp.123-134
• /
• 2013

Identifying structural modal parameters, especially those modes within high frequency range, from ambient data is still a challenging problem due to various kinds of uncertainty involved in vibration measurements. A procedure applying an ensemble empirical mode decomposition (EEMD) method is proposed for accurate and robust structural modal identification. In the proposed method, the EEMD process is first implemented to decompose the original ambient data to a set of intrinsic mode functions (IMFs), which are zero-mean time series with energy in narrow frequency bands. Subsequently, a Sub-PolyMAX method is performed in narrow frequency bands by using IMFs as primary data for structural modal identification. The merit of the proposed method is that it performs structural identification in narrow frequency bands (take IMFs as primary data), unlike the traditional method in the whole frequency space (take original measurements as primary data), thus it produces more accurate identification results. A numerical example and a multiple-span continuous steel bridge have been investigated to verify the effectiveness of the proposed method.

• Structural Engineering and Mechanics
• /
• v.37 no.5
• /
• pp.561-573
• /
• 2011

For efficient calculation of natural modes of structures, a numerical scheme which accelerates convergence of the subspace iteration method by employing accelerated starting Lanczos vectors was proposed in 2005. This paper is an extension of the study. The previous study simply showed feasibility of the proposed method by analyzing structures with smaller degrees of freedom. While, the present study verifies efficiency of the proposed method more rigorously by comparing closeness of conventional and accelerated starting vectors to genuine eigenvectors. This study also analyzes an example structure with larger degrees of freedom and more complex constraints in order to investigate applicability of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.31-38
• /
• 2001

A large-scale synthesis database for a unit selection based synthesis method usually retains redundant synthesis unit instances, which are useless to the synthetic speech quality. In this paper, to eliminate those instances from the synthesis database, we proposed a new pruning method called weighted vector quantization (WVQ). The WVQ reflects relative importance of each synthesis unit instance when clustering the similar instances using vector quantization (VQ) technique. The proposed method was compared with two conventional pruning methods through the objective and subjective evaluations of the synthetic speech quality: one to simply limit maximum number of instance, and the other based on normal VQ-based clustering. The proposed method showed the best performance under 50% reduction rates. Over 50% of reduction rates, the synthetic speech quality is not seriously but perceptibly degraded. Using the proposed method, the synthesis database can be efficiently reduced without serious degradation of the synthetic speech quality.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.135-138
• /
• 1997

In this paper, we proposed effective modeling method to nonlinear complex system. Fuzzy Neural Network(FNN) was used as basic model. FNN was fused of Fuzzy Inference which has linguistic property and Neural Network which has learning ability and high tolerence level. This paper, we used FNN which was proposed by Yamakawa. The FNN used Simple Inference as fuzzy inference method and Error Back Propagation Algorithm as learning rule. This structure has better property than other structure at learning speed and convergence ability. But it has difficulty at definition of membership function. We used Hard c-Mean method to overcome this difficulty. To evaluate proposed method. We applied the proposed method to waste water treatment process. We obtained better performance than conventional model.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.167-170
• /
• 2003

We propose stereoscopic video coding method using the syntax of MAC(Multiple auxiliary component) that was added to the MPEC-4 visual version 2 in order to describe the transparency of the video object. We also define the novel MAC's semantics in MPEG-4 that should support the proposed coding method. The major difference between the existing coding method and the proposed coding method is the addition of the residual texture coding. The proposed coding method assigns disparity map and residual texture to 3 components of MAC: one component for disparity map and the rest 2 components fer the luminance and chrominance data of the residual texture, respectively. The performance of the proposed method is evaluated in terms of PSNR by computer simulations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.129-137
• /
• 1994

In this paper, a new texture feature extraction method for texture image classification is proposed. The proposed method is a modified texture spectrum method. It uses local weighting averaged texture unit, that is, the neighbor pixels are weithted and averaged in 4-direction and the calculated values are compared with center pixel to find texture units. The proposed method has only 81 texture units and these units are really good features for texture classification. The proposed method is applied to vegetable images and Blodatz album images and compared with several conventional methods for the feature extraction time and the recognition rate.