• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2018

The improvement of critical current properties of $REBa_2Cu_3O_{7-x}$ (REBCO) coated conductors by introducing artificial pinning centers (APCs) is examined with respect to the field-angle anisotropy, high-field performance and relaxation property with time. Nano-rods along the c-axis introduced by PLD method and isotropic nano-particles introduced by TFA-MOD method are treated. The theoretical analysis is also shown to understand the effect of APCs quantitatively. The effects of superconducting layer thickness that influences the high-field performance and relaxation property are also discussed. It is shown that the upper critical field, which is another important factor to determine the high-field property, can be improved by introduction of APCs through electron scattering at interfaces with the superconducting matrix. The optimum critical current property can be obtained by properly designing the morphology and number density of APCs and the superconducting layer thickness.

• 폴리머
• /
• 제31권5호
• /
• pp.428-435
• /
• 2007

종류가 다른 두 가지 유기화 점토를 사용하여 얻은 초고분자량 폴리에틸렌(UHMWPE) 나노복합재료의 열적, 기계적 성질 및 기체 투과도를 서로 비교하였다. UHMWPE 복합체 필름을 얻기 위해 유기화 점토로는 헥사메틸렌 벤즈이미다졸-마이카($C_{16}BIMD-Mica$)와 Cloisite 25A가 사용되었다. 용액 삽입법을 이용하여 UHMWPE에 여러 다른 농도의 유기화 점토를 분산시켜 나노 크기의 복합재료를 합성하였다. 투과 전자 현미경(TEM)을 이용하여 비록 일부는 뭉쳐진 점토의 형태를 나타내었지만 한편으로는 점토가 나노 크기로 고루 분산되었음을 확인하였다. 약간의 유기화 점토 첨가(1-3 wt%) 만으로도 순수한 UHMWPE에 비해서 나노복합재료의 열적, 기계적 성질 및 기체투과도 성질이 높아짐을 알았다. 또한 전체적으로는 첨가된 두가지 유기화 점토 모두 적당한 농도에서 UHMWPE의 물성 증가에 큰 효과가 있었으며, 매트릭스 고분자에 사용된 두 가지 충전제중 Cloisite 25A가 $C_{16}BIMD-Mica$ 보다더 우수한 물성을 보였다.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.49-59
• /
• 2008

Hastelloy C-276, corrosion resistant alloy at high temperature, is used in chemical plant and power generation industry. In this study, process parameter of laser welding for welding property in Hastelloy C-276 using a continuous wave Nd:YAG laser was studied. As the result of experiment, laser welding did not show segregation or crack at heat affected zone compared to conventional GTWA welding. The melting zone showed cell dendritic structure along with welding line. In addition, planer front solidification is occurred from welding structure, and it was progressed to cellular solidification. Optimal process parameter for butt welding was 1.2kW and 2.0 m/min for laser power and welding speed, respectively. While heat input, output density, tensile stress, and longitudinal strain was $441.98{\times}103$ J/cm2, $29.553{\times}103$ W/cm2, 768 MPa, and 0.689, respectively. Lap welding of the same material showed greater discrepancy in tensile property during 1 line and 2 line welding. For 1 line welding, tensile stress was about 320 MPa, and 2 line showed slightly larger tensile stress. However, strain was decreased by 20%. From this result, lap welding of the same material, Hastelloy C-276, with 2 line welding is considered to be more effective process than 1 line welding with consideration of mechanical property.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.3-4
• /
• 2002

The stainless steel sheathed MgB$_2$ tapes with Cu addition were fabricated by PIT method without heat treatment. The $J_{c}$ value of 5,600 A/ $cm^{2}$and 16,000 A/$cm^{2}$ at 4.2 K and 5 T were obtained for the $MgB_{2}$ tape and 10 vol % of Cu added $MgB_{2}$ tape respectively. The $J_{c}$-B curve shows enhancement in J$_{c}$ under magnetic field, which suggests enhancement in flux pinning property with Cu addition.n.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.481-487
• /
• 2003

Polypyrrole (PPy) was coated sequentially by chemical and electrochemical methods on a woven fabric, giving rise to a fabric having high electrical conductivity. We investigated the effects of the preparation conditions on the various properties of the resulting fabric. The PPy-coated fabric with optimum properties was obtained when it was prepared sequentially by chemical polymerization at the elevated temperature of 100$^{\circ}C$ under a pressure of 0.9 kgf/$\textrm{cm}^2$ and then electrochemical polymerization with a 3.06 mA/$\textrm{cm}^2$ current density at 25 $^{\circ}C$ for 2 hrs with the separator plate. The surface resistivity of the resulting fabric was as low as 5 Ω/$\square$ .The PPy-coated fabric prepared under the optimum conditions showed practically applicable heat generating property. When electrical power was supplied to the fabric using a commercial battery for a mobile phone (3.6 V, LGLl-AHM), the temperature of the fabric increased very quickly from room temperature to ca. 55 $^{\circ}C$ within 2 min and was maintained for ca. 80 min at that temperature. The heat generating property of the fabric was extremely stable, exhibiting similar behavior over 10 repeated cycles. Therefore, we suggest that the PPy-coated fabric in this study may be practically useful for many applications, including flexible, portable surface-heating elements for medical or other applications.

• 한국염색가공학회지
• /
• 제16권6호
• /
• pp.1-9
• /
• 2004

The dyeings of cotton and silk fabric with Laurus tree extracts were investigated. The colorant was extracted with distilled water at $100^{\circ}C$ for lh. Dyeability(K/S), color fastness and antibacterial property of cotton and silk fabric were tested under conditions of various time, temperature, concentration, repeat-number of dyeing and mordants. The characteristics of dyeings Laurus extracts were figured out by K/S and CIELab values and color-fastness test was estimated in terms of wash fastness and light fastness. The maximum wavelength of spectrum was 670nm. The K/S value of cotton and silk fabric increased with increasing dyeing time and the exhaustion was saturated in 90min. Optical dyeing temperatures of cotton and silk fabrics were $60^{\circ}C$ and $80^{\circ}C$, respectively. The mordant effect on cotton fabric was achieved using Fe mordant. On the other hand, the mordant effect on silk fabric was obtained using Fe and Cu mordants. The wash fastness of cotton fabric was higher than that of silk fabric. Antibacterial property of silk dyeing was greater than that of cotton dyeing. In addition, the excellent antibacterial effect was imparted by Fe-post mordant method.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.12-21
• /
• 2009

The dyeing property of direct-spinning type and seaisland type 0.2D micro polyester nonwoven fabrics was characterized by three disperse dyes (Dorosperse Red KFFB, Blue KGBR, Yellow KRL) at $120^{\circ}C$ and $130^{\circ}C$. Before and after reduction cleaning, dyeing fastness was evaluated and the thermomigaration after heat setting at $180^{\circ}C$ for 60 min were also evaluated. Direct-spinning type fabric showed better dyeing property, wash fastness, and light fastness, but worse rub fastness than seaisland type fabric. The dyeing property and fastness of direct-spinning type fabric increased at higher dyeing temperature, whereas seaisland type fabric exhibited lower dyeing fastness and the increase of thermomigration at higher dyeing temperature. Non-fixed dye in fiber surface was removed by reduction cleaning process, then dyeing fastness was improved and thermomigration decreased. The higher dye uptake of direct-spinning type non-woven fabric caused the increase of dye molecule migration from fiber internal to fiber surface, so this fabric showed larger thermomigration than seaisland type non-woven fabric.

• 호남수학학술지
• /
• 제30권2호
• /
• pp.359-362
• /
• 2008

We shall give a sufficient condition for Hartogs-Laurent domains over a base $\mathbb{C}$ to be taut, and study some properties for Hartogs-Laurent domains related to the $E_*$-extension property.

• Journal of applied mathematics & informatics
• /
• 제34권1_2호
• /
• pp.107-114
• /
• 2016

In this paper we give some symmetric property of the generalized twisted q-Euler zeta functions and q-Euler polynomials.

• Journal of applied mathematics & informatics
• /
• 제33권5_6호
• /
• pp.649-656
• /
• 2015

In this paper we investigate some symmetric property of the twisted q-Euler zeta functions and twisted q-Euler polynomials.