• 한국농촌건축학회논문집
• /
• 제14권3호
• /
• pp.25-32
• /
• 2012

Traditional folk houses in Yongdong, Gangwon province play important roles in figuring out natural, human, and social value in the past time including housing life. However, according to the introduction of electric or plumbing equipment in housing life styles, many conventional architectures have been changed by installations of new electric or plumbing equipment, convenience facilities, and etc. Therefore, this study aims to make basic data to prepare for standardized installations of the electric or plumbing equipment, and convenience facilities by surveying of the present installation status, such as electric lights, outlets, switches, wiring, pipe laying, or monitoring devices for crime, disaster prevention facilities, and home appliances etc. Additionally, this paper is related to the meaning and usage, which are connected with the electric or plumbing equipment installations of the traditional folk houses to be prepare for the proper solutions between preservations of the original form and convenient lives for residents.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.48-50
• /
• 2005

New environment change of electric power system focused in consumer's energy supply and demand. But electric power reliability preservation and reliability improvement countermeasure also need for long-term. It is need that change equipments that is composing electric power system in well-timed time and by maintaining, prevent breakdown beforehand and prevent consumer's power interruption by equipment fail. However, as only quantitative estimation is available by reliability estimation method that is presented in existing, it is no to use in dictionary fault prevention. Therefore, applied optimum reliability preservation through existent equipment fault data analysis of electric power system in equipment replace side, and this when maintain equipment replace of electric power system for reliability preservation using responsiveness analysis to base ordering evaluate. In existing about main equipment plain that this paper is power system the valued failure rate use this by score and precedence of electric power system equipment for replace of system considered expense.

• 교육시설
• /
• 제9권2호
• /
• pp.37-50
• /
• 2002

Computers have become an indispensable part of everyday lives in 21st century. This is particularly true in early childhood education; multimedia use in kindergarten has rapidly grown in the last decade. Although ample research had been done on the issues of teachers' role in multimedia settings and selecting quality materials, few studies have been done on the proper environment for multimedia use in early childhood education. In this regard, this research examines the current status of multimedia use-animated illustration films, CD-ROM titles, and internet-in kindergarten. In addition, computer environment in kindergarten is investigated in order to provide guidelines for appropriate facilities and equipments. For smooth integration of computer activities into a school system, computers are located in ordinary classrooms in more than half of kindergarten in Seoul. Computers are used in independent lab settings in the last of the kindergarten in Seoul and there are four different types of lab settings. Among them computer at perimeter style is preferred for the ease of student-teacher, and student-student interactions. The importance of environment for early childhood education cannot be overestimated. It is so critical for early childhood education that the people in this field regard the environment as 'the third teacher' next to parents and teachers. Therefore the multimedia environment should also be considered seriously for the maximum use in early childhood institutions.

• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1021-1027
• /
• 2007

A construction noise is the main reason for people's petition among the pollution. The purpose of this study is to develop the noise prediction program to see the level of the noise on the construction site more accurately. For this purpose, the database of the power level on the various equipments was made. The noise reduction by distance and the noise reduction by diffraction of barrier were mainly considered and calculated. The simple noise prediction program will provide the information about proper height and length of the potable barrier which satisfies noise criteria of the construction sites from a construction planning stage. To investigate the reliability of this program, the predicted data was compared with the measured data. An average of difference between measured data and predicted data is $0.1{\sim}2.8\;dB(A)$ and a coefficient of correlation is about $0.85{\sim}0.95$.

• 산업기술연구
• /
• 제21권A호
• /
• pp.7-14
• /
• 2001

In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling thus put to economical use in the form of a substantial reduction in materials and construction cost. In the case of steel structure, there is no critical risk in the structural strength because of reinforcing methods of stiffness and steel plate but in the case of reinforced concrete structure, proper provision should be made in designing these openings, otherwise there is a risk that these opening will possibly weaken the structural strength of the building frame to a critical degree. In this paper, for the numerical analysis of the reinforced concrete beams with circular opening in the web, expecting stress concentration of the circular opening, reinforcing methods were studied. Twenty test pieces with each different reinforcing methods were tested and their resisting forces were defined. From the numerical analysis and test results, the followings were founded;(1)high shear stress distributed around the openings reduce the shearing strength, (2)from the numerical analysis, the maximum tensile stress occurred at opening nodes 1,7, these phenomena were agreed with the test results, (3)reinforcing method around openings have to carried out for stopping diagonal cracks, and (4)both, by steel plate, and wire mesh, are effective reinforcing methods.

• 대한교통학회지
• /
• 제12권4호
• /
• pp.35-52
• /
• 1994

In order to operate the computerized traffic signal system, it requires the detectors which ensure the exact detections of actual traffic data (e.g., traffic volume, occupancy and velocity of vehicles). The octagonal detectors are used currently in Korea. However, the maintenance of the detectors has many problems with the road repairs and the constructions on the pavement, and failure due to the disconnection of the wires. Serious delay due to the long installation time of loops also causes the traffic disturbances. The low sensitivities and splash-over effect can sometimes create error data after installation of the octagonal loops. The mai purpose of this study is to evaluate the feasibility of domestic use of the round (circular) inductive loops which developed recently in U.S.A. It was found that the round loops are comparable to the existing octagonal loops. In addition, the use of the high quality of materials in the round loop system can reduce the current problems and weakpoints of the octagonal loops. The installation cost of the round loop was found out as economic as the octagonal loop. The installation time of the round loop system can be reduced with the specially equipped loop truck, and wide/deep slots without sharp corners can extend the durability without serious stress of loop head wires. In conclusion, the round loop is superior to the octagonal type in overall points. It is recommended that the localization of the materials and equipments of round loop system is required to carry out the extensive local installations. Also, several contractors to meet the nationwide demand should be arranged to gurantee the proper maintenance and operation of the systems.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.36-41
• /
• 2008

Cooling tower is an important equipment of the cooling systems for large buildings like factory and department store. Water used for cooling in cooling tower is reused continuously. If the water is polluted, corrosion and scale can happen at equipments and pipes. In order to prevent this problem, it is necessary to control the water quality using chemicals. To control the water quality, an automatic control system is designed, fabricated, and experimented. The control system is based on an imbedded microcontroller. Relays are used for power driving, an LCD and LED for display, and RS485 for remote data acquisition. Monitoring program is also developed for easy man-machine interface and extraction of data stored in the imbedded processor and EEPROM. The control system calculates amounts of chemicals necessary using sensor data and injects the chemicals into the cooling tower on proper time. The developed water quality control system is expected to reduce cost of maintenance and extend the lifetime of the cooling systems with low cost.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.95-100
• /
• 2003

위성에서 사용되는 전자장비는 고신뢰성을 요구하고 있으며 예비부품을 보유함으로써 어느 정도의 심각한 결함에도 면역(Immune)되도록 설계되어야 한다. 통신위성은 통상 15년의 임무기간을 가지고 있으므로 위성에서 사용되는 전장 부품은 결함에 대한 분석이 수행되어야 한다. 본 논문은 명령 처리기의 결함 허용 설계와 그에 따른 신뢰도 예측값들은 무궁화 위성3호 자료와 다목적 위성 1호 자료를 참고하였다. 결함 허용 설계에는 많은 Trade-off연구가 필요하나 특히 결함 시나리오에 가장 적합한 결함 허용 방식을 선정하는 것이 중요하다고 할 수 있다.

• 한국치위생학회지
• /
• 제12권1호
• /
• pp.67-79
• /
• 2012

Objectives : The study was carried out to find out the experience of musculoskeletal disorder symptoms of dental hygienists and evaluate the risk with ergonomic evaluation method(RULA). Methods : The subjects in this study were 344 dental hygienists working at dental clinics and general hospitals in Seoul, Gyeonggi, Daejeon and Chungnam/Chungbuk. The data were collected through the self-questionnaire survey from July 26th 2010 to September 30th 2010. Results : The results showed that those who working at dental hospital, network dental clinics, with 1-5 years of clinical experience, long working hour and sitting hour, no rest hour, more physical and mental burden had higher rate of the experience of musculoskeletal disorder symptoms compared with other groups. The final score of RULA evaluation results was 6 on average requiring continuous observation and urgent demand for work improvements. According to the result of RULA evaluation by work, the orthodontic clinics were 4.5, prosthodontic clinics were 5.0, and dental surgery clinics were 6.8 being the most risky. Conclusions : The study showed high complaints rate on musculoskeletal disorders in dental hygienists. Thus, various measures including provision of proper working and rest hours, use of ergonomic working equipments, strengthening the health education for desirable working posture and the development of musculoskeletal disorder prevention program should be needed.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.982-992
• /
• 2001

In this paper, the performance of ventilation equipments in enclosed parking garages were investigated for several air distribution systems by numerical method. Air change effectiveness of the non-mixing system was 0.42. It meant that more supply air as much as the design supply air was needed to maintain good indoor air quality. In the high speed nozzle ventilating system which is most expensive one, air change effectiveness was 0.54. Therefore this system satisfied to ventilation design. In the jet fan ventilating systems, air change effectiveness for jet fan ventilating system-A with 18 jet fans and jet fan ventilating system-B with 6 jet fans in circulation mixing arrangement were 0.565 and 0.42 respectively. Jet fan ventilating system-C with 6 jet fans in transport mixing arrangement was 0.535. Jet fan ventilating system-A and jet fan ventilating system-C met the ventilation design. But velocity in jet fan ventilating system-A was over 2.0m/s which is inappropriate in human comfort. Therefore this system is not proper to ventilation. Jet fan ventilating system-C was the optimum one for enclosed parking garages among 5 systems examined in this paper.