• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.86-93
• /
• 2018

This present study was conducted to develop the domestic cultivation kit using water celery(Oenanthe Stolonifera DC.) seed. As the result of germination rates in 3 type inbred lines, the IT 232354 had the highest initial germination rate and final germination rate, and was selected as the inbred line to be used in the cultivation kit. The development of the domestic cultivation kit was carried out using the IT 232354 seeds. It was possible to cultivate up to 3 times harvest using the same root in this cultivation kit, though the growth decreased rapidly in the $4^{th}$ cultivation. As a result of investigating the effects of the type of nutrient solution on growth of water celery, the overall growth was the lowest in the nutrient solution for Oenanthe Stolonifera DC.(N.S.D.). The shoot growth was similar to that of nutrient solution for leaves and stem vegetables (N.S.L.S.) and amino acid fermentation by-product liquid (A.F.B.L.), however in the root growth, the N.S.L.S. was more effective than A.F.B.L. When it was harvested 4 times consecutively after 1 time of planting, the last survival ratio of A.F.B.L. was 100% while their ratios were 96.4% and 49.8% each for N.S.L.S. and N.S.D. For the growth by cultivation kit type, the hole type cultivation kit increased slightly compared to the 3 hole type cultivation kit in the $1^{st}$ and $2^{nd}$ harvest, but there was no difference in the $3^{rd}$ and $4^{th}$ harvest. Total yield of one cultivation kits showed the 3 hole type cultivation kit is much higher than the 2 hole type cultivation kit. According to the results of this experiment, it is possible to harvest three times by planting one times if it was cultivated using N.S.L.S. and A.F.B.L. in the 3 hole type cultivation kit.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.169-199
• /
• 2013

In various directions of cartoon, vertical stroll direction is opposite to the page direction of existing published cartoon with the popularity of webtoon and established new genre. Lots of studies on published cartoon focus on the cut direction by page, but webtoon doesn't have any concept of page. The pivot of cartoon oriented people is changed from paper to computer monitor as times go by, characteristics of media are changed and media is gradually diversified. Like the strengthening of mobile caused by smart phone's popularity, tablet PC's propagation in public education, etc. cartoon is included to the environment of media which is rapidly changed. In this situation, one of cartoon's unchanged important identities can be the direction made by harmony between picture and text. This thesis analyzed symbolic characteristics and effective value of hyogwatae, mimetic words of cartoon, focusing on works of Heo, Young Man. Hyogwatae just delivers not only sound but also shape, feeling, status, etc. and has significant characteristics by invoking the imaginary structure of literature. Strengths of modern Korean, various linguistic expressions and syllabic systems, let people feel minute feeling of language and difference of emotion and remember the memory through the direct and indirect experiences, so it makes it nuance. Because of the characteristics, representative works of Heo, Young Man have commercialization and writer characteristics, have communicated with people for a long time and have plentiful knowledge of Korean cartoon. The characteristics of hyogwatae in Heo, Young Man's cartoon make a lot of effects for the expression and delivery of cartoon more than the general expectation. When conducting the study focusing on the symbolic process of language, uncertainty and vague standard of judgement caused by the wide factors of study on the direction of general cartoon could be endured. And, through the Heo, Young Man's deep analysis on hyogwatae's direction, readers enjoy the process while inferring actually and intellectually between pictures and sentences. In the process, the equipment stimulating imagination more than pictures, effects and dialogues is hyogwatae. It's reader's equipment of active participation and its strength is symbolic structure.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.41-49
• /
• 2020

In this study, the effect of seed pre-treatments and pellet coating materials to enhance the efficiency of large-scale propagation of Aster koraiensis seeds were investigated. Seeds were immersed in water for one day, and only those that sank were used for pre-treatment to use filled seeds. Pre-treatments were divided into hormone treatments, with gibberellic acid (GA₃; 200 and 500 ppm) and 24-epibrassinolide (10^-6, 10^-7, and 10^-8M), and priming with potassium nitrate (100 mM of KNO₃). To produce pellet-coated seeds, pellet materials (DTCS or DTK) were applied to control (unprimed) and primed seeds with binders (PVA or CMC). The maximum germination percent (GP) of seeds before pellet coating was 65% (with the priming treatment), and there was no difference in the GP of seeds among hormone treatments. For seeds sown in a growth chamber on filter paper, GP was 41% for control (unprimed/uncoated) seeds, 65% for uncoated primed seeds, 71% for DTCS/PVA-pellet-coated seeds, and 42% for DTK/CMC-pellet-coated seeds. Seeds that were primed first and then pellet-coated showed greatly improved GP, mean germination time (MGT), and germination rate than seeds that were only pellet-coated. For seeds sown in commercial soil in a greenhouse, control seeds had a GP of 27%, whereas primed seeds had the highest GP (58%), and their MGT and GT were 9.4 days and 7.0%·day, respectively. In addition, DTK/PVA-pellet-coated seeds (40%) also had a GP higher than the control (27%), and their MGT was 15-27 days. For seeds sown in sandy-loam soil in a greenhouse, unprimed-pellet-coated seeds and primed-pellet-coated seeds both had GPs ranged of 39%, which were lower than that of control seeds. In general, the seeds that were pellet-coated with DTK had a higher GP than those pellet-coated with DTCS. Furthermore, the MGT of unprimed-pellet-coated seeds was 15.0-19.8 days, which was longer than the MGT of primed-pellet-coated seeds. These results suggest that priming enhances seedling emergence of Aster koraiensis seeds. Moreover, when priming is combined with pellet coating, DTK is a more suitable pellet material than DTCS, and PVA and CMC are equally suitable adhesives.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.463-470
• /
• 1995

Complete prelining of artificial vascular grafts with autologous endothelial cells may be one of the ideal solutions to obtain a nonthrombogenlc blood-contacting surface. To establish an intact endothelial cell monolayer on a prosthetic surface at the time of implantation,a sufficient number of endothelial cells and adequate propagation condition In cell culture are prerequisites. In this experimental study, endothelial cells from microvessels of adult human oriental adipose tissue were enzymatically harvested, and optimal culture conditions for proliferation of the endothelial cells in cell culture were examined. Human oriental adipose tissue was digested with collagenase and endothelial cells were separated from other stromal elements by mesh filtration method. Cultured cells were identified as endothelial cells by immunofluorescent staining for factor VIII-related antigen. Proliferation in usual 20% fetal bovine serum (FBS) medium or medium containing endothelial cell growth factor (ECGF)(5 ng/ml) and heparin (HEP)(1,000 units/ml) were compared,and the effects of adding compounds that increase intracellular cyclic adenosine monophosphate levels, that is,cholera toxin (CT)(1 $\mu\textrm{g}$/ml) and isobutylmethylxanthine (IBMX)(0.2 ml),were also analyzed. In total,following eight media groups were examined. 1) FBS medium + ECGF + HEP, 2) FBS medium + ECGF + HEP+CT, 3) FBS medium+ECGF+HEP+lBMX, 4) FBS medium+ECGF+HEP+CT+ IBMX, 5) FBSmedium, 6) FBS medium +CT, 7) FBS medium + IBMX, 8) FBS medium + CT + IBMX. It was shown that the medium containing ECGF + HEP with or without cholera toxin was most efficient in Stimulating cell proliferation. IBMX was considered to have antagonistic effect to ECGF. Among experimental groups without ECGF and HEP, the addition of cholera toxin and IBMX was shown to significantly potentiate cell proliferation. This results could provide a practical method for use of cultured human endothelial cells for endothelial cell seeding of cardiovascular prosthetic device, particularly in small-diameter vascular grafts.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.56-77
• /
• 2019

Bi-Seok is a treasure trove of funeral rites and an important cultural asset that can shed light on the historical and social history of calligraphy, but research of the topic is still insignificant. In particular, research on the production method of Bi-Seok remains an unproven field. The production of Bi-Seok can be roughly divided into ma-jeong (refining stone), sculpture, and the Buk-chil (process of engraving letters) process. This article reveals some facts: First, performing ma-jeong to the Sang-Seok, Honyu-Seok, Bi-seok, which are known to be God's things. This process is needed because of the change in the perception of the Honyu-Seok due to the settlement and propagation of Confucian ceremonial rituals in the times of hardship in 1592 and 1636. As the crafting process of ma-jeong did not remain concrete, it was only possible to examine the manufacturing process of Bi-Seok through its materials and tools. Second, the rapid proliferation of Oh-Seok and Sa-jeo-chwi-yong (purchase of things made by private citizens) in the Yeongjo era has great importance in social and cultural history. When the Gang-Hwa-Seok of the commodity were exhausted, the Oh-Seok that was used by Sadebu (upper civil class) were used in the tomb of Jangneung, which made Oh-Seok popular among people. In particular, the use of Oh-Seok and the Ma-Jeong process could minimize chemical and physical damage. Third, the writing method of the Bi-seok is Buk-chil. After Buk-Chil of Song Si-Yeol was used on King Hyojong's tomb, the Buk-Chil process ( printing the letters on the back of the stone and rubbing them to make letters) became the most popular method in Korea and among other East Asian countries, and the fact that it was institutionalized to this scale was quite impressive. Buk-Chil became more sophisticated by using red ink rather than black ink due to the black color that results from Oh-Seok. Fourth, the writing method changes in the late Joseon Dynasty. Until the time of Yeongjo's regime, when inscribing, the depth of the angle was based on the thickness of the stroke, thus representing the shade. This technique, of course, did not occur at every Pyo-Seok or Shindobi, but was maintained by outstanding artisans belonging to government agencies. Therefore, in order to manufacture Bi-Seok, Suk-seok, YeonJeong, Ma-jeong, Jeong-Gan, ChodoSeoIp, Jung-Cho, Ip-gak, Gyo-Jeong, and Jang-Hwang, a process was needed to make one final product. Although all of these methods serve the same purpose of paying respects and propagandizing the great work of deceased persons, through this analysis, it was possible to see the whole process of Pyo-Seok based upon the division of techniques and the collaboration of the craftsmen.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.6-13
• /
• 1979

In order to substract the time and cost of propagation for inducing the haploid plants per each species. 500 anthers of late uninucleate microspore on early binucleate microspore stage of Robinia pseudoacacia (Fuel tree) Punius granatum (Ornamental tree). Aleurites fordii (Faty tree) and Styrax japonica (Silvicultural tree) were cultured on the modified Murashige and Skoog's medium supplemented with Kinetin, 2.4-D and NAA as growth regulators. And I observed the samples of cultured anthers under the microscope which were made by Microtoming method and Paraffin method. The results were summarized as follows: 1) Among 500 cultured anthers per each species, anther numbers inducing the diploid callus were as follow: Styrax japonica 20 (4% for the species total); Aleurites fordii 10 (2% for the species, total) and Punica granatum 45 (9% for the species total) were showed. 2) 2n Callus were induced from anther wall. but haploid callus were induced from anther locule. 3) Haploid callus were induced only in 25 anthers (5% for the species total) of Robinia pseudoacacia. 4) These haploid callus were not originated from body cell of anther wall tissue, but from reduced microspores, 5) Since already reported many herbaceous haploid plants were induced from the callus which were originated from reduced microspores, I conclude that the anther of woody plant which induced the haploid callus also will be cultured haploid plant.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.187-192
• /
• 2015

Individuals in the population under a particular environmental condition influencing recurrently for a long time could locally adapted and local adaptation is of a fundamental importance in a breeding program, conservation activities of genetic resources or evolutionary biology. Plants at northern range limits have higher probability of expressing an adaptative genetic trait. The natural community at the northern range limit of Ilex cornuta (Chinese holly) in Buan, Jeollanam-do in Korea was composed of adults of 744 and seedlings of 211 (hereafter Community) and is designated as the Korean Natural Monument (No. 122) by the law. At two adjacent areas to Community, 85 (hereafter Plantation I) and 27 hollies (hereafter Plantation II) were planted respectively for preparations of the next generation. Eighty-five trees were sampled for genetic analysis in the three groups. Fifty-two (36%) of the total 143 amplicons were polymorphic from four AFLP primer combinations. A total of thirteen genotypes was identified and just one genotype was for 52 trees of Community. Seven and five genotypes were shown for Plantation I and II, respectively. There was no identical genotype between Community and Plantation (I or II) or between two plantation groups. Number of private loci was 2 for Community, 6 for Plantation I and 4 for Plantation II. We presumed their genetic backgrounds were quite different with one another and the plantation groups were made independently because they were different not only the genetic compositions but also their ages. Considering the genetic monomorphism by AFLP markers, observations of only male trees and asexual propagation as layerage or cuttage, the hollies in Community might be a genet by root suckering from a single male tree, not the results of selective removal of female trees for ornamental use in the past.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Korean Journal of Environment and Ecology
• /
• v.35 no.1
• /
• pp.48-67
• /
• 2021

Plant species exhibit current characteristics as a result of interactions with environmental conditions. The plants of Viola sp. have selected chasmogamous flowers with vigorous vegetative propagation or development of cleistogamous flowers as an adaptation strategy. Viola websteri is distributed on the Korean peninsula and the eastern part of Jilin Province, China. The center and edge of the distribution are expected to exhibit different population-dynamics. It is necessary to investigate the cause of its current limited distribution even though V. websteri has a mixed-mating strategy. Firstly, We examined the vegetation environment of habitats and evaluated its characteristics. Growth characteristics were examined through plant phenology. We then evaluated the population structure, characteristics of chasmogamous flowers, and productivity of cleistogamous flowers. Moreover, we compared population sizes between 2014 and 2018. Most habitats were located in deciduous broadleaf mixed forests adjacent to valleys. V. websteri produced chasmogamous flowers with self-incompatibility in April-May and cleistogamous flowers in June-September. The cleistogamous flower production is a strategy ensuring seed production under uncertain environmental fluctuations; these were approximately twice as numerous as chasmogamous flowers. The population structure was distinguished into stable and very unstable regions. There were sites where the population experienced a sharp decline in the 2018 compared to that of 2014. This large decline was found in the edge populations. The habitats had different microsites depending on the natural disturbances of drought and the matrix constituting the habitat, thus supporting various plants. Ensuring the production of seeds through cleistogamous flowers, it was determined that rapid seedling re-establishment and population replenishment were possible when the natural disturbance factor was removed. Environmental factors did not equally affect all populations or individuals. Therefore, it was expected that it would be able to persisted in a long time, despite the rapid decrease in the number of individuals in the population regionally. Local extinction and re-establishment are likely to repeat according to environmental change. We propose the additional population investigation based on this works are required. We also suggest a need to assess the long-term population dynamics and the genetic characteristics of chasmogamous flowers and cleistogamous flowers to establish and implement effective conservation strategies.