• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.1-12
• /
• 2006

In order to estimate a dynamic origin and destination demand between on and off-ramps in the freeways, a traffic flow theory can be used to calculate a link distribution proportion of traffics moving between them. We have developed a dynamic traffic estimation model based on the three-phase traffic theory (Kerner, 2004), which explains the complexity of traffic phenomena based on phase transitions among free-flow, synchronized flow and moving jam phases, and on their complex nonlinear spatiotemporal features. The developed model explains and estimates traffic congestion in terms of speed breakdown, phase transition and queue propagation. We have estimated the link, on and off-ramp volumes at every time interval by using traffic data collected from vehicle detection systems in Korea freeway sections. The analyzed results show that the developed model describes traffic flows adequately.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.25-33
• /
• 2020

A drought event is characterized by duration, severity and affected area. In general, after calculating a drought index using hydro-meteorological time series at a station, a drought event is defined based on the run theory to identify the beginning and end time. However, this one-dimensional analysis has limitations for analyzing the spatio-temporal occurrence characteristics and movement paths of drought. Therefore, this study is to define a three-dimensional drought event using a simple clustering algorithm and to develop a drought map that can be used to understand the drought severity according to the spatio-temporal expansion of drought. As a result, compared with the two-dimensional monitoring information to show spatial distribution of drought index, a proposed drought map is able to show three-dimensional drought characteristics inclusing drought duration, spatial cumulative severity, and centroid of drought. The analysis of drought map indicated that there was a drought event which had the affected area less than 10 % while on occations while there were 11 drought events (44 %) which had the affected area more a than 90 % of the total area. This means that it is important to understand the relationship between spatial variation of drought affected area and severity corresponding to various drought durations. The development of drought map based on three-dimensional drought analysis is useful to analyze the spatio-temporal occurrence characteristics and propagation patterns of regional drought which can be utilized in developing mitigation measures for future extreme droughts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.645-650
• /
• 1998

Alumina- and yttria-coated SiC powder was prepared by the surface-induced precipitation method, and sintered properties of silicon carbide prepared from this powder were investigated. After a well dispersion of SiC powders in the aqueous solution of $Al_2(SO_4)_3$ and $Y_2(SO_4)_3$, the mixed precursors of aluminum hydroxide, aluminum carbonate, yttrium hydroxide, and yttrium carbonate were precipitated on the surfaces of SiC particles through the hydrolysis reaction of urea. SiC specimens with alumina and yttria exhibit, 97.8% of theoretical density after the sintering at $1900^{\circ}C$ for 2 hrs. During annealing at $2000^{\circ}C$, $\beta$longrightarrow$\alpha$ phase transformation of SiC had taken place and resulted with a rodlike microstructure. Toughness of sintered SiC was enhanced by crack deflection around the rodlike grains. In case of annealing less than that of 3 hr, the fracture toughness of SiC was slightly improved with increasing the amount of sintering aid. However, annealed specimens for a long time showed constant fracture toughness even though the amount of sintering aid increased. It is resulted that the main factor for toughening in annealed SiC for a long time is the pullout effect of rodlike grains during the propagation of cracks, and the amount of sintering aids is less effective on the fracture toughness of SiC.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.409-425
• /
• 2013

This study presents a prediction of a time-series of the area inundated by effluent from Heavenly Lake caused by ground behavior prior to a volcanic eruption. A GIS-based hydrological algorithm that considers the multi-flow direction of effluent, the absorption and storage capacity of the ground soil, the storage volume of the basin or the depression terrain, was developed. To analyze the propagation pattern, four hypothetical collapse zones on the cheonji ground were set, considering the topographical characteristics and distributions of volcanic rocks at Mt. Baekdu. The results indicate that at 3 hours after collapse, for both scenarios 1 and 2 (collapses of the entire/southern boundary of cheonji), a flood hazard exists for villages in China, but not for those on the North Korean side of the mountain, due to the topographical characteristics of Mt. Baekdu. It is predicted that villages in both North Korea and China would be significantly damaged by flood inundation at 3 hours elapsed time for both scenarios 3 and 4 (collapses on the southern boundary of cheonji and on the southeastern-peak area).

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.23-32
• /
• 1999

A new numerical method using solution-adaptive grids (SAG) is developed to solve the Richards' equation (RE) for unsaturated flow in porous media. Using a grid generation technique, the SAG method automatically redistributes a fixed number of grid points during the flow process, so that more grid points are clustered in regions of large solution gradients. The method uses the coordinate transformation technique to employ a new transformed RE, which is solved with the standard finite difference method. The movement of grid points is incorporated into the transformed RE, and therefore all computation is performed on fixed grid points of the transformed domain without using any interpolation techniques. Thus, numerical difficulties arising from the movement of the wetting front during the infiltration process have been substantially overcome by the new method. Numerical experiments for an one-dimensional infiltration problem are presented to compare the SAG method to the modified Picard method using a fixed grid. Results show that accuracy of a SAG solution using 41 nodes is comparable with the solution of the fixed grid method using 201 nodes, while it requires only 50% of the CPU time. The global mass balance and the convergence of SAG solutions are strongly affected by the time step size (Δt) and the weighting parameter (${\gamma}$) used for generating solution-adaptive grids. Thus, the method requires automated readjustment of Δt and ${\gamma}$ to yield mass-conservative and convergent solutions, although it may increase computational costs. The method can be effective especially for simulating unsaturated flow and other transport problems involving the propagation of a sharp-front.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.37-37
• /
• 2018

We use two different methods for laboratory propagation from seed of lady's slipper orchid(Cypripedium macranthos Sw.); immature seed which also called green capsule or fully mature seed about 120~130 days from pollination. In green capsule culture, the seed pods should be collected within precisely right time. The right time of seed collection could be diverse under the wether conditions or nutritional factors of the plants. In fully matured seed culture, the more complicated procedures are needed to break the dormancy of the seed; thermal or chemical treatment. The seedlings in this study were easily germinated from immature seeds in Harvais medium; 53 days after pollination(DAP) in Cypripedium pubescens, DAP 65 in C. parviflorum and C. macranthos. The germinated seedlings were transplanted to hormone free media immediately to avoid abnormal growth of seedlings. When the seedlings have roots with a minimum length of around 2-3cm and have visible dormant buds, the seedlings were removed from the flask and stored in refrigerator for vernalization. To examine the correlation of seedlings and maternal plants, the 125 seedlings of C. macranthos were transplanted in the soil bed at a distance of 20-100 cm from mother plants on April 20. The survival rate of seedlings were 92% in 20 cm distance from the ripe plants, and 56 % in 100 cm distance. The seedlings which were transplanted near mother plants showed vigorous growth in plant height, leaf width, and especially dormant buds. Considering the existence of mycorrhiza which is a symbiotic association between a fungus and the roots of a orchid vascular, the various fungus from mother plants could affect the growth of the seedlings. These results indicate the possibility of high and stable production and practical industrialization of endangered lady's slipper orchids.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.61-74
• /
• 2005

Digital Multimedia Broadcasting(DMB) is a reliable multi-service system for reception by mobile and portable receivers. DMB system allows interference-free reception under the conditions of multipath propagation and transmission errors using COFDM modulation scheme, simultaneously, needs powerful channel error's correction ability. Viterbi Decoder for DMB receiver uses punctured convolutional code and needs lots of computations for real-time operation. So, it is desired to design a high speed and low-power hardware scheme for Viterbi decoder. This paper proposes a combined add-compare-select(ACS) and path metric normalization(PMN) unit for computation power. The proposed PMN architecture reduces the problem of the critical path by applying fixed value for selection algorithm due to the comparison tree which has a weak point from structure with the high-speed operation. The proposed ACS uses the decomposition and the pre-computation technique for reducing the complicated degree of the adder, the comparator and multiplexer. According to a simulation result, reduction of area $3.78\%$, power consumption $12.22\%$, maximum gate delay $23.80\%$ occurred from punctured viterbi decoder for DMB system.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.989-998
• /
• 2005

Information systems are today becoming larger and mostly broadband-networked. This exposes them at a higher risk of intrusions and hacking than ever before. Of the technologies developed to meet information system security needs, risk analysis is currently one of the most actively researched areas. Meanwhile, due to the extreme diversity of assets and complexity of network structure, there is a limit to the level of accuracy which can be achieved by an analysis tool in the assessment of risk run by an information system. Also, the results of a risk assessment are most oftennot up-to-date due to the changing nature of security threats. By the time an evaluation and associated set of solutions are ready, the nature and level of vulnerabilities and threats have evolved and increased, making them obsolete. Accordingly, what is needed is a risk analysis tool capable of assessing threats and propagation of damage, at the same time as security solutions are being identified. To do that, the information system must be simplified, and intrusion data must be diagrammed using a modeling technique this paper, we propose a modeling technique information systems to enable security risk analysis, using SPICE and Petri-net, and conduct simulations of risk analysis on a number of case studies.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.106-113
• /
• 2007

Biological characteristics of Philasteridies dicentrarchi (Ciliophora:Scuticociliate) isolated from the cultured olive flounder Paralichthys olivaceus was determined out by culture, growth conditions, and in vitro relief effect of chemical compounds. The scuticociliate has an active propagation ability by utilizing organic matters obtained from cell strain, bacteria, assorted feed, brain tissue and rotifer tissue. The ciliate achieved population growth activity under the conditions of $5{\sim}45\;ppt$ in salinity and pH 6-9. The ciliate had survived and propagated under the water temperature ranging $10{\sim}30^{\circ}C$, but active growth was observed in the temperature ranges of $10{\sim}25^{\circ}C$. Therapeutic trials were performed with formalin and hydrogen peroxide. The extermination time of the parasites with formalin was in 30 minutes both at 300 and 400 ppm, 60 minutes at 200 ppm, 90 minutes at 100 ppm, and 120 minutes at 50 ppm, respectively. In hydrogen peroxide treatments extermination time was 60 minutes in 300 ppm, 90 minutes in 200 ppm, and 150 minutes at 150 ppm and 100 ppm concentrations.