• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.407-412
• /
• 1997

In this paper, we present a new method to diagnose the characteristics of the soft tissue, especially a liver. In order to diagnose the characteristics of a liver, it is necessary to evaluate the propagation delay time and propagation velocity of bending vibration In a liver. For this purpose, we measure the propagation velocity of bending vibration in a liver for low frequency forced vibration using a standard ultrasonic Doppler diagnosis equipment. We have carried out preliminary experiments by using an ultrasonic probe of 3.5MHz and obtained some results. This new measurement method developed here can be applied to new research and medical fields for acoustic non-invasive diagnosis of soft tissue.

• Smart Structures and Systems
• /
• 제10권6호
• /
• pp.547-555
• /
• 2012

Measuring crack length in concrete fracture test is not a trivial problem due to high speed crack propagation. In this study, mechanoluminascent (ML) material, which emits visible light under stress condition, was employed to visualize crack propagation during concrete fracture test. Three-point bending test was conducted with a notched concrete beam specimen. The cracking images due to ML phenomenon were recorded by using a high speed camera as a function of time and external loadings. The experimental results successfully demonstrated the capability of ML material as a promising visualization tool for concrete crack propagation. In addition, an interesting cracking behavior of concrete bending fracture was observed in which the crack propagated fast while the load decreased slowly at early fracture stage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 2001

This paper describes the simulation study, conducted on the propagation characteristics of AE signal. In the case of gas insulation, such as SF6, the equipment is less affected by the environment condition than air insulation, because the component parts of equipment were placed in the enclosure, which is filled with compressed gas. But, when the breakdown in the electric insulation occurs, it takes much time and economical efforts to repair. Therefore it is very important to diagnose the equipment before the accident. And, in general, UHF and AE signal is the most common transducer to diagnose the state of the power equipment, so, in this investigation, we make a experimental apparatus with aluminum plate and transient analysis with ANSYS to observe the propagation characteristics of AE signal. Through the result of the analysis, we can make a further understanding on the propagation characteristics of AE signal, and get the fundamental skills for the GIS diagnosis.

• Steel and Composite Structures
• /
• 제32권2호
• /
• pp.213-223
• /
• 2019

For the first time, longitudinal and transverse wave propagation of triclinic nanobeam is investigated via a size-dependent shear deformation theory including stretching effect. Furthermore, the influence of initial stress is studied. To consider the size-dependent effects, the nonlocal strain gradient theory is used in which two small scale parameters predict the behavior of wave propagation more accurately. The Hamiltonian principle is adopted to obtain the governing equations of wave motion, then an analytic technique is applied to solve the problem. It is demonstrated that the wave characteristics of the nanobeam rely on the wave number, nonlocal parameter, strain gradient parameter, initial stress, and elastic foundation. From this paper, it is concluded that the results of wave dispersion in isotropic and anisotropic nanobeams are almost the same in the presented case study. So, in this case, triclinic nanobeam can be approximated with isotropic model.

• Advances in nano research
• /
• 제14권6호
• /
• pp.495-506
• /
• 2023

We study the bending wave, shear wave and longitudinal wave characteristics in the double nanobeams in this paper for the first time, in the process of research, based on the Reddy's higher-order shear deformation theory and considering shear layer stiffness, linear stiffness, inter-laminar stiffness, the pore volume fraction, temperature variation, functionally graded index influence on wave propagation, based on the nonlocal strain gradient theory and Hamilton variational principle, the wave equation of the double-nanometer beams are derived. Since there are three different motion states for the double nanobeams, which includes the cases of "in phase", "out of phase" and "one nanobeam fixed", the propagation characteristics of shear-, bending-, and longitudinal- waves in these three cases are discussed respectively, and some valuable conclusions are obtained.

• 대한전자공학회논문지SP
• /
• 제46권1호
• /
• pp.63-70
• /
• 2009

본 논문은 기존의 CSMA/CA 프로토콜의 지연시간을 감소시키고 전송률을 증가시키기 위해 제안된 CSMA/CA 프로토콜에 관한 연구이다. 수중환경에서 긴 전파시간에 의해 충돌확률이 증가하고, 전송효율이 감소함에 따라 프로토콜의 성능은 저하된다. 이러한 전파시간을 고려하여 본 논문에서는 기존의 CSMA/CA 프로토콜의 Timeout 상황을 피하기 위해 CTS 패킷에 STANDBY 프레임을 삽입하여 전송하는 프로토콜을 제안한다. 모의실험 결과, 제안하는 프로토콜이 기존 프로토콜보다 처리율에서 약 20% 정도의 성능향상을 보였고, 전파지연 대 전송지연 a의 값이 작을수록 성능이 우수함을 확인하였다.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.1-6
• /
• 2014

When the fluid energy convert into kinetic energy due to water hammer, the propagation velocity of pressure wave appear. The propagation velocity of pressure wave(1050 m/s) of very fast could be damage to the pipeline system. If the occurrence of water hammer is due to down-pressure, the faster the air exhaust or supply device is needed. it is high Speed Air Valve. In this paper, Each 3.12, 3.13, 3.72, $3.74kg/cm^2$ pipeline pressure were setting, and then executed pressure rapid drop for obtaining a high Speed Air Valve Operating time and pressure change data. the result was that pipe line pressure stabilization time were each 0.98, 1, 1.22, 1.25 sec. In other words, that pressure drop experimental results pipe line pressure was equal to atmospheric pressure without negative pressure After about one second. The study result would be useful to pipe line system stability design because this data could be foresee pressure stabilization time.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.1-7
• /
• 1997

십자형 및 변형 십자형의 2차원 터널 내에서 전파 전파 문제를 FVTD(finite volume time domain)법을 적용하여 시간영역에서 해석하였다. FVTD법은 임의의 미소 다면체 셀(cell)에 대하여 맥스웰 방정식(Maxwell's equation)을 체적 적분한 것에 이산화하여 나타낸 차분 방정식이다. 이 방식의 장점은 불균질 매질을 포함하는 임의 형태의 경계치 문제를 쉽게 계산할 수 있는데 있다. 본 논문에서는 FVTD법을 이용하여 십자형 터널에 대해 전자파의 전파 현상을 수치 계산을 하고, 유효성을 검증하기 위해 실험치와 비교하였다. 수치 계산의 종단에 있는 흡수 경계 조건은 손실 매질에 있느 PML(Perfect Matched Layer)흡수 경계 조건을 적용했다.

• Nuclear Engineering and Technology
• /
• 제27권5호
• /
• pp.670-686
• /
• 1995

본 논문의 저자는 원자력 발전소와 같은 복잡한 대규모의 시스템의 실시간 고장진단 방법을 1994년 IEEE TNS Vol. 41, No. 4 호[1］에 발표하였다. 이번 논문에서는 고장전파모델(FPM)로서 같은 'Timed SDG Model' 를 사용하고 있으나 고장전파시간( FPT)을 에메논리 개념을 이용하여 정확하게 구하기 어려운 FPT을 실질적으로 이용할 수 있도록 했으며, 또한 고장전파확율(FPP)개념을 도입하여 하나이상의 고장원인 절점 (Node)들을 절점고장율과 더불어, 보다 효과적으로 판별할 수 있도록 했다. 또 FPM내에서 고장의 전파확율를 고려함으로서 보다 실질적인 고장 진단방법을 제시하였으며 본 제안된 방법을 고리 원전 2호기 1차계통에 적용하여 1차계통 FPM내의 각 FPP이 ‘1’인 경우에 한하여 그 성능을 입증하여 보았다.

• 한국환경보건학회지
• /
• 제34권4호
• /
• pp.311-315
• /
• 2008

This study was performed to investigate propagation characteristics and effects of road traffic noise generated from vehicles. Noise levels of expressway and general road were measured at four points in a straight line based on distance from the road, and analyzed. The average noise level of expressway was 78.9 dBA at 5 m, 76.4 dBA at 10 m, 72.0 dBA at 20 m, 69.0 dBA at 30 m. That of general road was lower about $3.1{\sim}3.5\;dBA$ than that of expressway. There was no significant difference in distance attenuation between expressway noise and general road noise. The farer the distance from source is, the more the attenuation is. The influence range of noise is assessed by noise environmental standards or road noise limits. Noise levels of the time zone were measured at a boundary line of apartment to grasp noise variation by time. The time zone of lowest noises was $3{\sim}4$ a.m. and that of highest noise was $8{\sim}10$ a.m. Data recorded on tapes were analyzed to understand the characteristics of frequency because these characteristics are important factors to plan the noise reduction measures, namely path measures.