• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.287-288
• /
• 2012

DNS is performed to examine the propagation characteristics of stagnating turbulent premixed flames. Results show good agreement with the recently proposed relationship for turbulent burning velocity, $S_T$. It is shown that $S_T$ increases through a thinner flamelet, turbulence production and correlation between fluctuating velocity and buoyancy force respectively for diffusive-thermal, hydrodynamic and Rayleigh-Taylor instability. The mean curvature doesn't have significant effect on $S_T$ at the leading edge.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.303-310
• /
• 2002

The cyryptographic strength of a Feistel cipher depends strongly on the properties of its S-boxes, which are the strict avalanche criterion(SAC), the propagation criterion(PC) and GAC(the global avalanche criterion). In this paper global avalanche characteristics of S-boxes of the SEED are in-vestigated and compared to global avalanche characteristics of S-boxes of S-boxes of the Data Encryption Standard(DES).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.50-55
• /
• 2006

For prediction of railway noise, propagation characteristics must be identified as well as the source characteristics. During the railway noise in outdoor pass the air, various factors affect the propagation. In this study, to suggest more effective and convenient equation to predict railway noise, calculation method for correction factor was investigated.

• 한국전기전자재료학회논문지
• /
• 제23권10호
• /
• pp.798-803
• /
• 2010

This paper describes the characteristics of electromagnetic wave propagation in power transformer. A transformer which is similar to 154 kV single phase on-site transformer unit was provided for the purpose of the experiment. The 12 dielectric windows on the transformer enclosure to install UHF (ultra high frequency) sensors and the full scale mock ups of winding and the core were also equipped in the transformer. Every sensors to be installed to the transformer was tested and verified whether they show same characteristics or not before the experiment. A discharge gap which was used as a PD (partial discharge) source moved to several necessary locations in the transformer to simulate dielectric defects. Propagation times of electromagnetic wave signal from PD source to sensors decided by the routes of both reflection phenomenon and diffraction phenomenon were compared each other. The experimental results showed propagation route of the PD signal makes an effect on the frequency spectrum of front part of the signal and the magnitude of the signal and propagation time of the signal when the signal is captured on the sensor.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.181-187
• /
• 2012

위성통신시스템은 수신환경에 따라 전파 품질이 변화하므로 수신 지역의 전파 환경 특성을 분석하는 것이 매우 중요하다. 위성통신은 지상 무선통신과는 달리 위성의 고도 및 대기 환경에 추가로 영향을 받기 때문에 전파특성을 분석하기 위해서는 추가로 고려해야할 요소들이 많다. 본 논문에서는 도심지 환경에서 정지궤도 위성통신 시스템의 위성-지상 간 전파수신환경을 분석하였다. 도심지환경의 전파 시뮬레이션을 위해 건물을 가상으로 설정하고 수신환경을 변화시켜가며 전파특성을 분석결과를 도출하였다. 본 논문의 연구결과를 통해 Ka-band에서의 위성 이동통신 시스템 설계에 도움을 줄 수 있을 것이다.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.68-75
• /
• 2005

The fatigue life of welded joints is associated with crack initiation and propagation life. Theses cannot be easily separated, since the definition of crack initiation is vague due to the initiation of multiple cracks that are distributed randomly along the weld toes. In this paper a method involving a notch strain and fracture mechanical approach, which considers the characteristics of welded joints, e.g. welding residual stress and statistical characteristics of multiple cracks, is proposed, in an attempt to reasonably estimate these fatigue lives. The fatigue crack initiation life was evaluated statistically, e.g. the probability of failure occurrence in 2.3, 50 and $97.7\%$, in which the cyclic response of the local stress/strain hi the vicinity of the weld toes and notch factors derived by the irregular shape of the weld bead are taken into account. The fatigue crack propagation life was simulated by using Monte-Carlo method in consideration of the Ad-factor and the mechanical behavior of mutual interaction/coalescence between two adjacent cracks. The estimated total fatigue life, $(N_T)_{P50\%}$, as a sum of crack initiation and propagation life under the probability of failure occurrence in $50\%$ showed a good agreement with the experimental results. The developed technique for fatigue lift estimation enables to provide a quantitative proportion of crack initiation and propagation life in the total fatigue life due to the nominal stress range, ${\Delta}S$.

• 한국레이저가공학회지
• /
• 제9권2호
• /
• pp.1-9
• /
• 2006

In this paper, we investigated the characteristics of fatigue fracture on TB(Tailored Blank) weldment by comparing the fatigue crack propagation characteristics of base metal with those of TB welded sheet used for vehicle body panels. We also investigated the influence of center crack on the fatigue characteristic of laser weld sheet of same thickness. We conducted an experiment on fatigue crack propagation on the base metal specimen of 1.2mm thickness of cold-rolled metal sheet(SPCSD) and 2.0mm thickness of hot-rolled metal sheet(SAPH440) and 1.2+2.0mm TB specimen. We also made an experiment on fatigue crack propagation on 2.0+2.0mm and 1.2+1.2mm thickness TB specimen which had center crack. The characteristics of fatigue crack growth on the base metal were different from those on 1.2+2.0mm thickness TB specimen. The fatigue crack growth rate of the TB welded specimens is slower in low stress intensity factor range $({\Delta}K)$ region and faster in high${\Delta}K$ region than that of the base metal specimens. The slant crack angle slightly influenced the crack propagation of the TB specimen of 2.0+2.0mm thinkness.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.211-218
• /
• 2020

실내 환경에서 송수신기의 위치 변화에 따른 전파 전달 특성을 시뮬레이션을 통하여 예측하고, 경로손실 측정을 통하여 얻어진 결과를 예측결과와 비교하고 분석하였다. 경로손실 측정 환경으로는 대회의실을 선택하였으며, 또한 실내 장식물 및 비품이 없는 전시실을 선택하여 두 환경의 전파 전달 특성을 비교하였다. 각 실내 환경에서 송신기의 위치는 전방 벽면 중앙과 측면 벽면 중앙에 위치하는 두 가지 경우를 선택하였고, 수신기의 위치는 실내 공간의 중심선과 측면 벽을 따라 움직이며 수신 전력을 측정하였다. 각각의 송수신기 위치변화에 대하여 3GHz와 6GHz의 수신 전력을 측정하고 시뮬레이션 예측 결과와 비교하였다. 송신기의 위치 및 주파수 대역 변화에 따라 각 수신점에서 수신 전력의 변화를 분석하였다.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.1-10
• /
• 2024

실내 로비 환경에서 다중 경로에서 6, 10, 17 GHz 주파수 대역의 전파 특성을 분석하였다. 가시선(Line-of-sight, LOS) 및 비가시선(Non-line-of-sight, NLOS) 경로는 송신 안테나 위치에서 수신 안테나 위치까지 2-16 m (0.5 m 간격) 거리에서 측정되었다. 기본 전송 손실은 경로에 해당하는 FI(Floating intercept) 경로 손실 모델을 사용하여 세 가지 매개변수를 비교하였다. RMS(Root mean square) 지연 확산은 측정 결과를 누적 확률 10, 50, 90%로 비교하였다. 기둥의 존재와 특이한 로비 구조로 인해 측정된 모든 주파수에서 전파 손실과 전파 지연이 발생하였다. 이에 실내 로비 환경에 대한 측정 시나리오와 표준 측정 데이터 제공을 제안하였다. 이를 통해 다양한 구조의 실내 로비 환경에서 5G 및 밀리미터파 대역의 전파 특성에 대한 연구에 기여할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제14권1호
• /
• pp.31-40
• /
• 1993

It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propa gation characteristics of the internal vibration in the tissue for the low frequency mechanical vibra lion by using bispectral analysis is proposed. In the method, low frequency vibration of $f_0(=100Hz)$ is applied on the surface of the object, and the waveform of the internal vibration ${\times}{\;}(t)$ is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal ${\times}{\;}(t.)$ at the frequencies ($f_0,{\;}f_0$) and ($f_0,{\;}2f_0$) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, where since bispectrum is free from the gallssian additive noise we can get the value with high S/N. Basic experimental system is con structed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization.