• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1064-1068
• /
• 2020

For LW-TLM antenna of 65 kHz, Near-field propagation characteristics due to wave propagation obstacle are analyzed in this paper. The simulation modeling for propagation effects are based on the model of actual LW-TLM antenna which utilizes the frequency of 65 kHz, and the model expressed as propagation obstacle at a mountain height and a proximity of antenna and mountain. The near-field performance are analyzed based on the parameters of simulation model. In case of a normal mountain height and distance between the adjacent mountain and antenna site, a field strength change of about 1.7 dB has occurred. Above the constant distance of propagation obstacle and antenna, the wave propagation characteristics of disregarding the effects of propagation obstacle are shown. The results of this paper can be used to design and build a transmitting antenna site with 65 kHz operating frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2072-2077
• /
• 2003

Animal-like robots are serving an important role as a linkage between biology and engineering. So, in this paper, we aim to develop a biomimetic microrobot that mimics the locomotion mechanism of a gastropod. This microrobot has 3 DOF (x, y translation and rotation), and has small size, unlimited traveling range, high resolution and low cost. Its movement can be made using propagation wave that is generated by the controllable sinusoidal voltage source and piezoelectric effects. This soft motion that can be generated by propagation wave and piezoelectric mechanism would be useful for the motion on the slippery surface. So we modeled the propagation wave mechanism including piezoelectric effect and friction on the contact surface, and could know the velocity of the microrobot is dependent on the driving frequency, input voltage peak, propagation wavelength and surface friction coefficient. With these results we design the microrobot, and accomplish its fabrication and experimentation. The development of this microrobot shall be aimed to design an autonomous moving actuator like animal. Also it can be used from micromanipulation system technology to biology and medicine.

• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.272-280
• /
• 2019

Forest medicinal resources, which constitute one of the non-timber forest products, have been regarded as healthy and highly valued products. To meet the increasing demand of the medicinal resources, it is necessary to improve the propagation methods of medicinal plants. In vitro propagation not only allows an opportunity for propagating plants in large numbers but also allows for enhancing the quality and quantity of the desired functional component of a plant by altering the growth factors, such as medium, carbon source, and plant growth regulators influence plant. There have been several studies of in vitro propagation methods, such as axillary bud culture, shooting, and embryogenesis, on Kalopanax septemlobus, Eleutherococcus sessiliflorus, Hovenia dulcis, and Schisandra chinensis in Korea between from 2000 through 2010. Furthermore, there have been attempts to proliferate callus and plantlets for producing useful natural compounds by using bioreactors. Here, we provide an account of the in vitro propagation methods of medicinal trees in Korea based on a review of several micropropagation studies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.34-40
• /
• 1984

In this study, martensite-ferrite dual phase steel composed of martensite in hard phase and ferrite in soft phase is made as model material, and the difference of fatigue crack propagation behavior resulted from the structural size is investigated by fracture mechanics and microstructural method. The main results obtained are as follows; 1)Fatigue crack propagation rate is influenced by ferrite grain size. In other words, in the low .DELTA. K region fatigue crack propagation rate is decreased with decreasing of grain size but the difference of propagation rate resulted from the structural size is decreased as .DELTA.K is increased. 2)The above result is explained by the degree of crack arrest effect of second phase for fatigue crack propagation depending on the ratio of reversed plastic zone size to ferrite grain size.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.45-51
• /
• 2015

In this paper, we discuss the belief propagation decoding algorithm for polar codes. The performance of Polar codes for shorter lengths is not satisfactory. Motivated by this, we propose a novel technique to improve its performance at short lengths. We showed that the probability of messages passed along the factor graph of polar codes, can be increased by multiplying the current message of nodes with their previous message. This is like a feedback path in which the present signal is updated by multiplying with its previous signal. Thus the experimental results show that performance of belief propagation polar decoder can be improved using this proposed technique. Simulation results in binary-input additive white Gaussian noise channel (BI-AWGNC) show that the proposed belief propagation polar decoder can provide significant gain of 2 dB over the original belief propagation polar decoder with code rate 0.5 and code length 128 at the bit error rate (BER) of $10^{-4}$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.1931-1939
• /
• 1993

The wave propagation characteristics of laminated composites subjected to a transverse high-velocity impact of a steel ball is investigated. For this purpose, high-velocity impact experiments were conducted to obtain the strain response histories, and a finite element analysis based on the higher-order shear deformation theory in conjunction with the static contact law is used. Test materials for investigation are glass/epoxy laminated composite materials with $[0^{\circ}/45^{\circ}/0^{\circ}/-45^{\circ}]_{2s}$ and $[90^{\circ}/-45^{\circ}/90^{\circ}-45^{\circ}/90^{\circ}]_{2s}$ stacking sequences. As a result, the strain responses obtained from the experiments represented the wave propagation characteristics in the transversely impact, also the wave propagation velocities obtained from high-velocity impact experiments and wave propagation theory agree well.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.1
• /
• pp.36-43
• /
• 2015

Since the crack generation and its propagation caused by welding defects is one of the main hull damage patterns, the simulation of crack propagation process has an important significance for ship safety. Based on interface element method, a finite element model to simulate crack propagation is studied in the paper. A Lennard-Jones type potential function is employed to define potential energy of the interface element. Tensile tests of steel flat plates with initial central crack are carried out. Surface energy density and spring critical stress that are suitable for the simulation of crack propagation are determined by comparing numerical calculation and tests results. Based on a large number of simulation results, the curve of simulation correction parameter plotted against the crack length is calculated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.62-72
• /
• 2010

As the applications for Mobile Ad-hoc NETworks (MANETs) have varied, performance analysis has become one of the main research areas. They commonly offer only simple radio propagation models that neglect obstacles of a propagation environment. The radio wave propagation model has a strong impact on the results of the simulation run. In this paper we present the new experimental results of the impacts of the various propagation models on MANETs' performance. Intensive simulations have been presented using the group mobility which models typical ad-hoc situations such as military movements or disaster recovery activities under the supervision of a group leader. Comparisons of conventional simple models with more complicated models, i.e., shadowing, Raleigh, and Ricean models, show that, in spite of the models' popularity, the free space and two-ray ground models are too optimistic in describing real ad-hoc group mobility situations.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2058-2065
• /
• 2004

A light collecting probe named Multi-color Integrated Cassegrain Receiving Optics (MICRO) is applied to spark-ignited spherical spray flames to obtain the flame propagation speed in freely falling droplet suspension produced by an ultrasonic atomizer. Two MICRO probes are used to monitor time-series signals of OH chemiluminescence from two different locations in the flame. By detecting the arrival time difference of the propagating flame front, the flame propagation speed is calculated with a two-point delay-time method. In addition, time-series images of OH chemiluminescence are simultaneously obtained by a high-speed digital CCD camera to ensure the validity of the two-point delay-time method by the MICRO system. Furthermore, the relationship between the spray properties measured by phase Doppler anemometer (PDA) and the flame propagation speed are discussed with three different experimental conditions by changing the fuel injection rate. It was confirmed that the two-point delay-time method with two MICRO probes is useful and convenient to obtain the flame propagation speed and that the flame propagation speed depends on the spray properties.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.256-261
• /
• 2007

본 논문은 이미지 완성(Image Completion)을 위한 근사적 에너지 최적화 알고리즘을 제안한다. 이미지 완성이란 이미지의 특정영역이 지워진 상태에서, 그 지워진 부분을 나머지 부분과 시각적으로 어울리도록 완성시키는 기법을 말한다. 본 논문에서 이미지 완성은 유사-확률적(pseudo-probabilistic) 시스템인 Markov Random Field로 모델링된다. MRF로 모델링된 이미지 완성 시스템에서 사후 확률(posterior probability)을 최대로 만드는 MAP(Maximum A Posterior) 문제는 결국 시스템의 전체 에너지를 낮추는 에너지 최적화 문제와 동일하다. 본 논문에서는 MRF의 최적화 알고리즘들 중에서 Belief Propagation 알고리즘을 이용한다. BP 알고리즘이 이미지 완성 분야에 적용될 때 다음 두 가지가 계산시간을 증가시키는 요인이 된다. 첫 번째는 완성시킬 영역이 넓어 MRF를 구성하는 정점의 수가 증가할 때이다. 두 번째는 비교할 후보 이미지 조각의 수가 증가할 때이다. 기존에 제안된 Priority-Belief Propagation 알고리즘은 우선순위가 높은 정점부터 메시지를 전파하고 불필요한 후보 이미지 조각의 수를 제거함으로써 이를 해결하였다. 하지만 우선순위를 정점에 할당하기 위한 최초 메시지 전파의 경우 Belief Propagation의 단점은 그대로 남아있다. 이를 개선하기 위해 본 논문에서는 이미지 완성을 위한 MRF 모델을 피라미드 구조와 같이 층위로 나누어 정점의 수를 줄이고, 계층적으로 메시지를 전파하여 시스템의 적합성(fitness)을 정교화 해나가는 Hierarchical Priority Belief Propagation 알고리즘을 제안한다.