• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.122-138
• /
• 2001

It is well known that whcn waves propagating on a shallow water suddenly encounter a much deeper water they do not propagate further but are reflected. If we apply this phenomenon to a harbor by making the harbor depth much greater than outside, we could improve the harbor tranquillity by making the waves impinging into the harbor be reflected at the harbor entrance. In the present paper, first we apply the numerical models based' on the mild-slope equation and extended mild-slope equation to calculate the long wave resonances in a rectangular harbor with a very large depth discontinuity at its entrance to find that the difference between the models is almost negligible. By applying the numerical model to a realistic model harbor whose inside is entirely dredged, it is found that the effect of dredging is insignificant when the inside depth is twice the outside one but tripled inside depth significantly reduces the long waves of period of one to five minutes whieh may exert a bad influence on ship motion. Moreover, even when only a portion of the harbor basin is dredged, the cffect of dredging in the dredged area is found to be comparable to that of entire dredging, showing that the dredging of harbor basin can be a countenncasure for harbor resonance.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.03a
• /
• pp.51-68
• /
• 2008

When the train enters into a tunnel a high speed, pressure waves are generated inside the tunnel. The pressure waves at propagate in a form of compression wave toward the tunnel exit and a fraction of the compression waves that arrives at the exit of the tunnel are discharged to outside of the tunnel and the remainder is reflected into the tunnel as expansion waves. The compression waves emitted from the tunnel does not radiate in a specific direction but in all directions. If the amplitude of the compression wave is great, it causes noise and vibration, and it is called "Micro-Pressure Wave." "Micro-Pressure Wave" must be considered as a decision for the optimum tunnel cross-section as the amplitude of the compression wave depends on train speed, tunnel length, area of tunnel and train. Therefore, this paper introduces the case study of Micro-Pressure Wave characteristics for determination of tunnel cross section in Honam high speed railway, the pressure inside the tunnel and the micro-pressure waves at tunnel exit were measured at Hwashin 5 tunnel in Kyungbu HSR line. At the same time. a test of train operation model was performed and then the measurement results and test results were compared to verify that the various parameters used as input conditions for the numerical simulations, which were appropriate. Also a model test was performed, in order to analysis of the Micro-Pressure Wave Mitigation Performance by Type of Hood at Entrance Portal.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.79-84
• /
• 2004

It is well accepted that modem emulsion explosives are intrinsically much less sensitive than traditional products such as dynamites or black powder. However, they have still been involved in a significant number of accidental explosions. In October 1975, Canadian Research, Limited's, Energetic Research Laboratory in Quebec exploded. Although explanations for the incident varied, one logical explanation was that the pump used in transporting the emulsion dead headed, thereby turning mechanical work in to frictional heating under a zero flow rate. There is a minimum pressure required for combustion(MBP) to propagate in emulsion explosives. A stable deflagration may lead to a deflagration-to-detonation transition(DDT) in emulsion explosives. Tests were also performed on sensitized sampled consisting of 6 to 21% waters as well as 1 to 11% aluminium powder. It was founded the emulsion explosives consisting of 6% waters had the lowest minimum homing pressure(MBP) of 3 bar, and the 21% waters were unable to achieve sustained homing at pressures as high as 100 bar. The aluminium contained explosives tested here displayed a MBP higher than that of without emulsion. It appears that this test may offer a firm ground for the classification of emulsion explosives in view of the regulating the hazards associated with the various process used for their manufacturing and transport.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.61-72
• /
• 1992

The Danyang area consists of the thrust and folded sedimentary rocks of Paleozoic and Mesozoic Era. The area is bounded by major tectonic units which are the Gagdong Thrust to the west and the Okdong Fault to the east. According to the structural analyses, the area is affected by polyphase deformation. This study establishes deformational sequence in the area. Mylonite zone along the Okdong Fault corresponds to the first generation of structures ($D_1$). $D_1$-structures are discrete shear zone in the Jangsan Formation and bedding parallel extensional deformation in the Cambro-Ordovician sequences. $D_2$-structures were formed prior to the sedimentation of the Jurassic Bansong Group, which are the NW-trending fold and linear structures. After sedimentation of the Bansong Group, the area is strongly affected by the Daebo Orogeny which produces NE-trending thrusts, folds and linear structures. Earlier structures were tightened and rotated toward NE. Some thrust faults did not propagate into the Bansong Group. It is suggested either the Bansong Group acted as a decoupling horizon or rest on unconformably on the thrust faults. The area is weakly affected by $D_4$-event of which structures are E-W trending folds and faults. The Jugryeong Fault clearly cut the earlier folds and thrust faults. The rocks within the fault zone were sliced and rotated during the strike-slip movements. Block rotation and transpressional features can be commonly observed.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.235-244
• /
• 2006

Granite cores were sampled within Korea Atomic Energy Research Institute and cyclic loadings up to 1550 cycles were applied. Microcrack development in samples due to cyclic loading was estimated using Acoustic Emission(AE) method. AE showed two different types depending on numbers of cycle. Type 1 appeared at low cycles and had low energy and diverse frequencies, while type 2 appeared at high cycles and had high energy and uniform frequency. AE property of type 1 indicates voids and pre-existing microcracks in samples may close or propagate up to certain length. Microcracks may be sheared or closed during loading and are recovered from shear or opened during unloading when AE of type 2 were measured. P wave velocities and Felicity ratios were measured at 50, 150, 350, 750, 1550 cycles. P wave velocities were almost the same regardless of number of cycles applied. However, Felicity ratios were much lower than 0.9, indicating that microcracks were developed within samples. This result indicates that Felicity ratio is a better tool than P wave velocity to estimate the damage of rock.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.108-116
• /
• 1991

In the non-linear behavior of many materials, there is difference between the monotonic behavior by static load and the cyclic behavior by cyclic load. In particular, the short fatigue cracks to propagate in elasto-plastic stress concentrations(notches), are governed significantly by the cyclic behavior of materials. Accordingly, it is needed to investigate and compare the monotonic and cyclic behavior of materials. In the pressent study, the stress-strain relations of materials by monotonic and cyclic load tests were examined for 2 kinds of steels(SS41, HT80) and 5 kinds of Al-alloys(A5083-O, A6N01-T5, A7N01-T4, A7016-T6, A7178-T6). And the constants for mechanical properties of the materials were determined by experimental results, Moreover, when a notch was subjected to cyclic load, the effect of cyclic hardening property of materials on the variation of stress-strain amplitude in the notch tip was discussed by the application of Neuber's rule and experiments for a center notched plate.

• Korean Journal of Microbiology
• /
• v.46 no.2
• /
• pp.122-126
• /
• 2010

RAD53 functions as an effector kinase of checkpoint pathways in Saccharomyces cerevisiae, which plays a central role to regulate many downstream cellular processes in response to DNA damage. It also involves in transcriptional activation of various genes including RNR genes which encode the key enzyme required for dNTP synthesis. In this study, we identified CYC8 as a suppressor for the hydroxyurea sensitivity of $rad53{\Delta}$ mutation. $Rad53{\Delta}$ mutant transformed with a multi-copy plasmid containing CYC8 showed increased hydroxyurea resistance. In contrast, TUP1 which forms a complex with CYC8 did not function as a suppressor. In the case of mutations, both $cyc8{\Delta}$ and $tup1{\Delta}$ suppressed hydroxyurea sensitivity of $rad53{\Delta}$. Since CYC8 can propagate as a prion in yeast, overexpression of CYC8 induced misfolding of the normal CYC8 proteins, resulting in dominant cyc8-phenotype. Therefore, it is suggested that CYC8 can act as a multi-copy suppressor due to its prion property. It was observed that the levels of RNR transcription were increased in the yeast strains containing either multi-copies of CYC8 gene or $cyc8{\Delta}$ mutation, suggesting that the increased level of RNR will elevate the intracellular pools of dNTPs, which, in turn, suppress the phenotype of $rad53{\Delta}$ mutation.

• Korean journal of food and cookery science
• /
• v.25 no.6
• /
• pp.671-676
• /
• 2009

In order to develop and propagate the low sodium kimchi for preventing high sodium related diseases, the salinity, pH and acidity of cabbage(Bachu) kimchi sampled from home located in 6 big cities(Pusan, Daegoo, Kyungjoo, Daegoo, Jeonjoo, Daejeon, and Seoul) and commercial 6 manufacturers(A~F) distributed in markets were monitored and analyzed in the current study. Salinity was significantly (p<0.05) higher in homemade($3.03%{\pm}0.60$: 1.79~4.40) kimchi than in commercial($2.38%{\pm}0.60$:1.04~2.87) kimchi. Also, salinity was significantly(p<0.05) higher in Pusan($3.45{\pm}0.60%$) kimchi than in Kyungjoo($3.11{\pm}0.39$), Daegoo($3.19{\pm}0.42$), Jeonjoo($2.98{\pm}0.32$), Daejeon($3.00{\pm}0.38$) and Seoul ($2.52{\pm}0.46%$) kimchi. However, there was no significant difference(p<0.05) of salinity in 6 kinds of commercial kimchi. Related to this result, pH of kimchi from homemade and commercial was $4.40{\pm}0.29$(3.72~6.03) and $5.45{\pm}0.76$ (4.23~6.35), acidity of kimchi from homemade and commercial were $0.99{\pm}0.30%$(0.28~2.17) and $0.45{\pm}023$(0.17~0.93), respectively. Thus, the current study provides evidence that we may need to manufacture the low sodium kimchi because all homemade kimchi, especially Pusan and Daegoo kimchi and commercial brand kimchi contained over 2% salinity.

• Ocean and Polar Research
• /
• v.29 no.1
• /
• pp.9-31
• /
• 2007

Most seismic sea waves in the East Sea originate from earthquakes occurring near the Japanese west coast. While the waves propagate in the East Sea, they are deformed by refraction, diffraction and scattering. Though the Boussinesq equation is most applicable for such wave phenomena, it was not used in numerical modelling of seismic sea waves in the East Sea. To examine characteristics of seismic sea waves in the East Sea, numerical models based on the Boussinesq equation are established and used to simulate recent tsunamis. By considering Ursell parameter and Kajiura parameter, it is proved that Boussinesq equation is a proper equation for seismic sea waves in the East Sea. Two models based on the Boussinesq equation and linear wave equation are executed with the same initial conditions and grid size ($1min{\times}1min$), and the results are compared in various respects. The Boussinesq equation model produced better results than the linear model in respect to wave propagation and concentration of wave energy. It is also certified that the Boussinesq equation model can be used for operational purpose if it is optimized. Another Boussinesq equation model whose grid size is $40sec{\times}30sec$ is set up to simulate the 1983 and 1993 tsunamis. As the result of simulation, new propagation charts of 2 seismic sea waves focused on the Korean east coast are proposed. Even though the 1983 and 1993 tsunamis started at different areas, the propagation paths near the Korean east coast are similar and they can be distinguished into 4 paths. Among these, total energy and propagating time of the waves passing over North Korea Plateau(NKP) and South Korea Plateau(SKP) determine wave height at the Korean east coast. In case of the 1993 tsunami, the wave passing over NKP has more energy than the wave over SKP. In case of the 1983 tsunami, the huge energy of the wave passing over SKP brought about great maximum wave heights at Mukho and Imwon. The Boussinesq equation model established in this study is more useful for simulation of seismic sea waves near the Korean east coast than it is the Japanese coast. To improve understanding of seismic sea waves in shallow water, a coastal area model based on the Boussinesq equation is also required.

• Journal of Distribution Science
• /
• v.10 no.5
• /
• pp.29-36
• /
• 2012

This paper aims to establish a Fengshui-based marketing model that companies engaged in selling dwelling spaces can utilize to increase their sales. The study is based on an investigation of appraisal statements and analysis techniques used in Fengshui. The Fengshui marketing model can be used for corporate advertising, sales promotions, public relations events, and for framing an overall marketing strategy according to changing consumer demand. As a sales promotion strategy, it can be used to influence consumer psychology and behavior. Although this study is limited to the all-pervasive advertising and marketing of houses by construction companies under installment plans, the Fengshui marketing method can also be used for the sale of store locations, space for product display, and so on. Initially, I analyze living spaces according to traditional Fengshui theory, and subsequently apply the modern method to study topographical space structures and geomagnetism disturbances. I present a standard form for writing the Fengshui appraisal statement based on the objective analytical method of Fengshui. With its shortcomings remedied, the appraisal statement can lead to high-quality advertising and increased valuations because it is based on objective data analysis and systematic evaluation of houses. In brief, I have designed the Fengshui marketing model as a sales promotion technique for the housing industry. I believe this study will contribute to the application of Fengshui in the housing industry's sales promotion efforts through high-quality advertising. Future research should evaluate Fengshui marketing in the housing industry based on case studies. Research questions to be addressed could include how Fengshui marketing has affected installment sales of houses and how Fengshui architectural practices affect general well-being. These studies would help propagate Fengshui marketing by validating its effectiveness. In addition, case studies should be undertaken to consider the practical applications of Fengshui marketing, how it can contribute to maximizing a company's image and profits, and how it can promote customer satisfaction.