• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.45-52
• /
• 1994

For the purpose of producing emulsified fire proofing agent for synthetic fibers, 2,3-dibromopropylmonoamido orthophosphate[DP-AOP] and bis(2,3-dibromopropyl)monoamidoorthophosphate[$(DP)_{2}AOP$] were synthesized, and their structures were identified by instrumental analysis, respectively. Using three kinds of emulsifiers, O/W emulsified fire proofing agents, DPF and DPDPF, were obtained corresponding to DP-AOP and $(DP)_{2}-AOP$, respectively. Various synthetic textiles were fire-retardant treated by prepared DPF and DPDPF, and fire retardancy and tearing strength of the resulting products were tested. The results showed that as the concentration of fire proofing agents increased, fire retardancy increased, but the tearing strength much decreased, where the tendencies of DPDPF were deeper than those of DPF. But, since the fire retardancy appeared favorable in the range of $10{\sim}20wt%$ of DPDPF, DPDPF is proven to be a fire proofing agent useful for various synthetic textiles.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.1-21
• /
• 2011

Because of high demand of color quality of the prints, proof prints are more important for end-user to predict and correct the final prints directly as an intermediate. Thus, proof prints can be used as a reference to take minimum ${\Delta}E^*ab$between the originals and finals in the field. The advantage of proof prints is to predict and correct color easily through the RIP(Raster Image Processor) without printing plates and plate making steps. While, it is thought that the proof systems are almost equivalent to the press in the past, present proof systems are more simple to take proof prints more easily due to the automation and digitalization. This paper addresses a method to perform an accurate profiling according to proof paper types and find optimal proof papers which meet proofing requirement. Although proof papers are matched with ISO 12647-7, we were trying to reduce ${\Delta}E^*ab$, In addition to the above, through the Gamut Mapping and Iteration, We were trying to find optimal proofing conditions.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.223-226
• /
• 2001

In this paper, we propose a robust and fragile watermarking technique for tamper proofing of still images. Robust watermarks are embedded by quantization with a robust quantization step-size, and it is imperceptible value for human visual system. Fragile watermarks are embedded by thresholding and quantization with EW(Embedded Zerotree Wavelet) algorithm. The proposed method enables us to distinguish malicious change from non-malicious change. Futhermore this technique enables us to find tampering regions and degrees.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.85-86
• /
• 2003

Shrink-proofing processing of wool fabrics is practically carried out by means of oxidation of wool with choline and/or covering of wool surface with resins. But, these are not necessarily environmentally friendly process causing a waste fluid containing organic chlorine compounds. Development of alternative method using more environmentally friendly process is desired. In this study, utilization of titanium oxide, TiO$_2$, photocatalytic reaction for the shrink-proofing of wool has been examined. It was found that the treatment of wool by TiO$_2$ photocatalytic reaction gave good shrink-proofing characteristics to wool fabrics.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.31-42
• /
• 2003

The optimum color proofing system with the similar colorants to the printing system has to be used in high quality offset color printing. And so, the evaluation on color reproduction properties of the colorants for proofer and press are very important. In this paper, the optimum color proofing method is recommended by means of colorimeric comparative evaluation on the color reproduction properties such as color gamut, color difference, hue error of the colorants for the proofing system of CRT monitor, inkjet printer, dye sublimation type digital proofer, and the actual printing system of offset press.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.12b
• /
• pp.17-28
• /
• 2000

Recently, as the prepress mainstream is changed to the digital workflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. However, most of the digital proofing devices have lower resolutions than analog proofing systems and differ with actual color presses in the color gamuts. Therefore, proper color compensations are needed for digital color proofing in order to match color between the proofs and the press sheets. In this paper, we used 3-dimensional look-up table(LUT) and tetrahedral interpolation method for the color space conversion between the device independent color space(CIEXYZ or Lab) and the device dependent color space(CMY) to reduce the color differences between the original copy and digital color proofs and the press sheets.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.48-52
• /
• 2001

The study was conducted to find out suitable flame proofing on silk fabrics and to examine closely the flame retardancy effect and the physical properties changes of the silk, which was dyed by natural dyes and synthetic dyes, treated with agent (Diphenylbutylamidophosphate (DPBAP)). The results of the study were as follows: 1) Silk could be treated with DPBAP easily soluble in water by means of simple Pad-Dry-Cure. 2) The add-on of silk fabrics dyed by natural dyes was more than that of silk fabrics dyed by synthetic dyes. 3) The silk fabrics dyed by india ink among natural dyes has more flame retardancy effect in before treating with flame proofing agent than in after treating with it. 4) The physical properties (stiffness and tensile strength) of the silk fabrics treated with flame retardancy agent were little changed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.43-50
• /
• 2005

This study is for the isolated water-Proofing method using Poly-ethylene sheet in the underground water tank which is not affected by construction environments such as wet, low temperature and surface condition. The special features of this water-proofing method are that the construction and management control are very easier and more effective than the existing construction method.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.93-98
• /
• 2008

As high rise buildings and large span spatial structures are constructed, new composite members and construction techniques are continuously developed. Wide flange steel beam can be easily constructed but the fire proofing protection is necessary and the cost is high. Nowadays environmental pollution of structures is becoming a big issue. The material of fire proofing protection is not allowed to use for structural members in several countries because it cab be a cause of environment pollution. Composite beam is a new hybrid beam system which is not needed a fire proofing protection process. Composite beam has better construction capacity than that of RC system and has more economic advantages than that of wide flange steel beam. In this paper, structural design guide lines of composite beam were provided to apply design and construction.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.1
• /
• pp.51-63
• /
• 2007

It is noted that the disaster such as fire, explosion, collapse has been rapidly increased caused by strength deterioration of steel structures at petrochemical plant during fire. In this regard, it is stressed out that the legal requirement for fire proofing for steel structures at petrochemical plant should be carefully reviewed since the current legal requirement such as Industrial Safety & Health Law, Architectural Law has a conflict and different way of approach. In addition, it is our point of view that the present law should be revised to consolidate into single law including engineering design criteria to reflect unreasonable legal requirement. It is further our point of view that the performance certificate for fire proofing like UL-1709, basis of maintenance should be appropriately and reasonably provided in line with global practice.