• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.188-190
• /
• 1987

In this paper the real-time analysis of vibration objects using projection moir\ulcorner method is realized. By measuring the vibration of two different speakers using three grationgs with different pitch. it is possible to analyze the vibrating speakers, so the fundamental frequency mode of speakers is obserbed at 550Hz and 105Hz respectively and phase lag is shown nonlinear characteristics. Also it is possible to measure the vibration as to nonperiodic signals as well as peoriodic signals.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.7-12
• /
• 2005

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.171-176
• /
• 2019

In modern times, many IoT products are being used as all things and devices are connected to the Internet and IoT products become easily accessible through the network. For the convenience of users, IoT products can be remotely operated automatically without manual operation. Various research and development are underway to improve the convenience of users by using IoT products. However, since only the convenience of the users is pursued, in terms of security, there is a serious problem that exposes the user's personal information. This paper has proposed a method to apply $moir{\acute{e}}$ technology to IoT products in order to improve the performance of security, and a method to increase the safety of IoT products using user face authentication based on shadow $moir{\acute{e}}$ as a $moir{\acute{e}}$ phenomenon method, and the projection $moir{\acute{e}}$. When comparing the existing IoT products and IoT products applied with $moir{\acute{e}}$ technology, IoT products applied with $moir{\acute{e}}$ technology are safer in terms of security.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.88-93
• /
• 2005

$Moir\acute{e}$ topography method is a well-known non-contacting 3-D measurement method. Recently, the automatic 3-D measurement by $Moir\acute{e}$ topography has been required, since the method was frequently applied to the engineering and medical fields. The 3-D measurement using projection $Moir\acute{e}$ topography is very attractive because of its high measuring speed and high sensitivity. In this paper, using two-wavelength method of projection $Moir\acute{e}$ topography was tested to measuring object with $2\pi-ambiguity$ problems. The experimental results prove that the proposed scheme is capable of finding absolute fringe orders, so that the $2\pi-ambiguity$ problems can be effectively overcome so as to treat large step discontinuities in measured objects.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.159-165
• /
• 2001

Recently Moire and PMP(Phase Measuring Profilometry) are adopted as a practical methodology for non-contact 3-D measurement of free surface. These methods extract the 3-D informations from the images of the object projected with stripe-pattern light. This paper presents a simple projector generating stripe-pattern light using expensive polygon mirror. In this projector, slit-beam is generated with a Laser diode and a rod lens and the laser diode is switched on/off synchronizing with the rotation of the polygon mirror. So its structure is very simple and light-weighted compared to the existent projection methods using several lenses and it is also easy to change the pitch and the phase of the stripe pattern. Experimental results show that the intensity profile of the stripe pattern can be approximated with sinusoidal curve by reducing the pitch of the stripe pattern.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.128-129
• /
• 2000

3차원 형상측정에서 많이 쓰이고 있는 모아레 간섭계에는 그 setup에 따라 Projection Type과 Shadow Type이 있다. 이러한 모아레 간섭계는 광원과 측정 카메라의 각도에 의해 물체의 형상을 측정하게 된다. 그러나, 이러한 광원과 측정 카메라의 각도에 의해 생겨나는 그림자에 의한 영향 때문에 물체의 형상이 굴곡이 심한 곳은 측정하기 어렵다. 본 논문에서는 아래 그림과 같이 두 개 이상의 광원을 사용하여 그 영향을 줄이기 위한 방법을 제안하였다. 이 방법은 projection type이나 shadow type에서 동일하게 적용 가능할 것으로 예상된다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.670-679
• /
• 1995

This paper presents the 3-D profile measurement system of live human faces, which was developed specially for 'KUMDORI sculptor robot' of the '93 Taejon Exposition. '93 Taejon EXPO. The basic principle for measurement adopts the slit beam projection which is a method of measuring 3-D surface profiles using geometric optics between the slit beam and the CCD camera. Since the slit beam projection consumes long measuring time, it is unfit to measure the 3-D profiles of living objects as human. Therefore, the projection type slit beam method which consumes short measuring time is newly suggested. And an algorithm to reconstruct the 3-D profile from the deformed images using finite approximated calibration is suggested and practically implemented. The projection type slit beam method was applied to spectators in a period of '93 Taejon EXPO. The measurement results show that the technique is suitable for 3-D face profile measurement on a living body.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.12-21
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1182-1191
• /
• 1994

This paper presents an enhanced method of slit beam projection intended for the rapid measurement of 3-dimensional surface profiles of dies and molds. Special emphasis is given to optimizing the design of optical system so that the measuring accuracy can be maximized by adopting two-plane camera calibration together with sub-pixel image processing techniques. Finally, several measurement examples are discussed to demonstrate that an actual measuring accuracy of $\pm$ 0.2 mm can be achieved over the measuring range of 500 mm{\times}300mm{\times}200mm$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2457-2462
• /
• 2011

The need for rapid and accurate measurement of 3-dimensional objects is increasing due to the paradigmatic shift in manufacturing from mass production to small batch production. A three dimensional measurement technique which can provide the dimensional information of the object manufactured or to be manufactured has been developed. This method is based on phase shifting moire topology. Digital-Micromirror-Device (DMD) has been used in generating phase shifting moire fringes. And the mechanically moving optical components used for phase shifting, which might result in measurement errors, have been replaced by the DMD. Inherent $2\pi$-ambiguity problem, occurring in the calculation of phase from the light intensity distribution due to the nature of arctangent function, has been overcome by adapting the phase unwrapping method. The advantage of this technique is the easy change of the range and the resolution of the measurement by simply changing the computer generated grid pattern with the appropriate combination of projection lens of various focal length.