• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.487-494
• /
• 1986

This paper is concerned with the techniques of error check and reduction of state diagram using logic programming. Error check program aims to check not only syntax errors but also semantic errors. And reduction program optimizes the state diagram by finding the redundant equivalence states and removing those from the set of states. The input of both program is state diagram represented as state table form. The output of error check program is error comment. The output of reduction program is equivalence reduced state table. Both programs are implemented using prolog. Prolog has very powerful pattern matching, and its automatic back-tracking capabilities facilitate easy-to-write error check and reduction programs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1542-1551
• /
• 1990

This paper shown how to measure the machining error in diameter of cylindrical workpiece and compensate the measured machining error in NC turning. Machining error is measured by the electric micrometer mounted on the tool post with the NC part program for probe location path analyzed. Correct NC part program for finish turning is automatically generated to compensate the measured machining error. These concepts have been effectively introduced to a newly developed software for error compensation. In turning experiments with the developed error compensation system, machining error was almost within the specified tolerance, which reveals the effectiveness of the developed system.

• Journal of the Ergonomics Society of Korea
• /
• v.5 no.2
• /
• pp.3-9
• /
• 1986

The present paper deals with obtaining the proper application criteria for the control mode, by using computer graphic simulation, in order to recover the error effectively occurring in the practical supervisory contol work of hyman-robot system. In these experiments the opteations by human and by control program are performed as control modes for recovering the error. And then we compare and analyze tow control modes taking task error and task time as performance measures and task difficulty as a variable factor. Consequently as the task difficulty increases, the task error in the operation by hyman tends to be less than in the operation by control program and the task time is superior in the operation by control program. Therefore, we suggest that two control modes should be used jointly for recovering the error and the operation by control program should be applied in major fraction of control and the operation by human in minor fraction of control.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.203-209
• /
• 2021

When carrying out computer programming, the process of checking and correcting errors in the source code is essential work for the completion of the program. Non-computer majors who are learning programming for the first time receive feedback from instructors to correct errors that occur when writing the source code. However, in a learning environment where the time for the learner to practice alone is long, such as an online learning environment, the learner starts to feel many difficulties in solving program errors by himself/herself. Therefore, training on how to check and correct errors after writing the program source code is necessary. In this paper, various types of errors that can occur in a Python program were described, the errors were classified into simple errors and complex errors according to the characteristics of the errors, and the distributions of errors by Python grammar category were analyzed. In addition, a coding learning process to refer error lists was designed to present a coding learning method that enables learners to solve program errors by themselves.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.17-23
• /
• 2004

At the conclusion from the hypothesis testing, there is a possibility of making Type I error and Type II error. The purpose of this article is to use this program in statistics teaching through developing the program for studying on the concept about these two errors, two kinds of the probability of errors by the variation of rejection region, two kinds of the probability of errors by the variation of sample size, the relations of the probability $\alpha$ and $\beta$ by these two errors, and power function, power curve.

• Korean Journal of Clinical Pharmacy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2008

The goal of this research was to find out the effect of dispensing error prevention program on the incidence of the error in a university hospital pharmacy in Daegu. Dispensing error in this research was defined as the error identified during double-checking process, so it does not mean that the wrong dispensing was administered to patient. Drug name error was the most frequently found error, accounting for about one third of all dispensing errors, and was followed by counting error, strength error, dosage form error, and others. Similar drug name was identified as the most frequent reason for the error, taking up about two thirds of all drug name errors. In this research, six months of dispensing error prevention program resulted in statistically significant reduction of dispensing error by 42 percent. Therefore, it is recommended that hospital pharmacy implement such prevention program regularly to reduce the incidence of the error. Finally, it appears that drug approval authority should closely check the similar drug names and have power to command pharmaceutical company to change the name if pertinent.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.985-997
• /
• 2004

In this paper, an automatic programming error-diagnosing system is provided for novice C programmers by plan matching and program execution. Program execution results are used to provide flexibility in describing the relationship between programming plans, to verify the correctness of the plan matching differences, and to detect the influence of a plan's error to the related plan. We can give easy and informative explanations to the students according to a plan's error and the resulting effects to related plans. The students are consulted to check their program's correctness with the given test data. Our error-diagnosing system is tested with student's programs for the 14 various and difficult problems and gives acceptable recognition results.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.1-7
• /
• 2002

Human errors can take place in all levels that include the design, production, construction, operation and maintenance of plant facilities. It was found that the causes were concerned with the effects of human error. This study verified characteristics of the on-site operators and error mechanism, and used the classifying sheet to analyze human error that occurred in process. Also, by applying the ASEP(Accident Sequence Evaluation Program) HRA(Human Reliability Analysis) procedure, the algorithm to estimate the HEP and the ASEP HEP program to analyze human error in the plant were developed. If it is built in on-site, possible human error incident will be prevented and the systematic human error prevention strategy will be devised.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1096-1101
• /
• 1992

In order tominimize fixing error of workpieces, circle, prismatic, sphere, cylindrical and sculptures types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table meas the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alognment of NC program to workpiece ste-tp condition via the generation of NC progarm. A postprocessing module is alos developed for generating NC-part program(User Macro) to compensate for machining errors in end milling and boring processes. Developed method are verified by experiments.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.71-77
• /
• 2020

KRS which is subsystem of Korea Augmentation Satellite System (KASS) performs a role of collecting and monitoring GPS signals. In order to generate the accurate correction message, the site which meets the requirements should be selected and verification to meet each requirement should be accompanied. When the sites are selected, the environmental considerations are EMI, clear horizon (CH) and multipath. Of these, EMI and CH can be checked for satisfaction by instrumentation, but multipath error is difficult to predict. Therefore, multipath error analysis for the installation position of actual antenna at each KRS site should be preceded, and multipath scenario should be generated for each location to analyze the effects of the resulting system performance. In this paper, based on satellite signals collected from each KRS sites, the method for analyzing multipath error in each KRS sites is described, and the multipath error is analyzed. Also to perform an analysis of the effects on system performance due to multipath error, multipath error modeling is performed for the generation of simulation scenarios.