• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.9-14
• /
• 2012

In this study, the profiles of asphalt pavements were measured using a lightweight profiler and depths of macrotexture were analyzed based on the measured profiles. Profiles on dense graded asphalt pavement, prorous asphalt pavement, stone mastic asphalt (SMA) pavement, and base layer measured, and depth of macrotexture were calculated and analyzed. Profiles on the pavement that happened as asphalt mixture segregation were measured and depths of macrotexture were analyzed. The results showed that the depths of macrotexture of asphalt pavement were effectively calculated using the measured profiles, and the depths of macrotexture for different asphalt pavements were analyzed. The pavement areas which have asphalt mixture segregation were detected based on analysis of macrotexture depths.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4349-4358
• /
• 2013

This study aimed to examine the relation between subjective oral hygiene status of the elderly and oral health impact profile and to present it as basic data for the improvement of quality of life and oral care. The study subjects were 231 elderly people aged 65 and over. This study measured the oral health behavior and subjective oral hygiene status based on cross analysis by calculating the median of OHIP-14 to divide the above-median group into a subgroup and the below-median group into a superordinate group. Correlation and regression analyses were performed to examine the effects on the oral health impact profile. The oral health impact profile according to oral health behaviors was not significant. The oral health impact profile based on the subjective oral hygiene states is currently affected by oral hygiene status, masticatory problems, toothache, xerostomia and halitosis. As a result of regression analysis to confirm the effect on the oral health impact profile, much experience of masticatory problems, toothache, xerostomia and gum diseases is the most influential. This shows that the subjective oral hygiene status is not healthy as the oral health impact profile is high. It is considered necessary to establish an oral health promotion program to improve the quality of life of the elderly and active oral care methods in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.4
• /
• pp.244-252
• /
• 2014

EOF (Empirical Orthogonal Function) analysis is applied to investigate the sand movement in Hujeong Beach. For the analysis, the profile data which were observed five times from June 2009 to May 2010 along the 13 baselines were used. To secure the temporal and physical consistency among the 13 profile data, the 13 profile data were combined into one data and using this data the EOF analysis was performed. According to the analysis, the first EOF is related with the mean topography and the second EOF represents the natural variation of sediment migration and the third EOF is related with the along-shore sediment transport arising from storm. The remaining EOFs show no special relation with wave conditions. In conclusion the main factors which are having great effects on Hujeong Beach's sand movement are analyzed as natural variation and along-shore sediment transport owing the wave conditions.

• Korean Institute of Interior Design Journal
• /
• no.31
• /
• pp.56-63
• /
• 2002

This study intends to prepare a system that can be used, by applying digital technique, in analyzing complexity of architectural forms that have been visualized by the correlation based on the distribution chart made in accordance with profile lines. The profile lines are derived from the edge analysis of the architectural forms, simplified based on the visual theory. For the purpose, this study was conducted in the following ways: First, problems of the existing models for the elevation analysis were examined along with formal analysis based on visual recognition to consider the profile lines derived from the forms. Secondly, in elevation analysis, profile lines were derived by digital method to measure them qualitatively. To verify the objectivity of the measured data value, a survey was conducted based on the adjective cataloging method, and the correlation of the survey result and analyzed data was analyzed to verify the validity of the derived data. Thirdly, supplementation for the problems deducted from experiments and the possibility to use it in designing were suggested. Digital method has many advantages over the conventional analyzing system in deriving precise data value by excluding subjectivity. It also allows various analytical methods in analyzing numerous data repeatedly. Diversified models and methods of analysis considering numerous factors arising in the process of designing remain assignments to research in future.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.74-80
• /
• 2012

In this paper, we developed the profile analysis-based machine vision system for inspecting assembly parts in the industrial field. Implemented system composed of triple set of camera: one was used for acquiring slant image; other is required to acquire a top image; the other was used for side image. After obtaining parts which have gray scale image, threshold value was calculated by analyzing the profile of the image. Experimental results showed that proposed algorithm have a good performance for detecting fault parts and for classifying each parts as well.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.627-634
• /
• 1995

The purpose of this study to analyze characteristics of soft tissue profile in Korean young adults. The sample consisted of 50 young adults (25 males and B females) who had pleasing and normal occlusion. Soft tissue analysis (facial convexity angle, nasolabial angle, H-angle, Z-angle, E-line to upper lip, lower lip, Sn-pog' to upper lip, lower lip) was performed on lateral cephlograms. Mem and standard deviation was obtained. When compared by other studies, mean profile of this sample was relatively straighter and both the upper and lower lips was more protrusive.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.85-94
• /
• 2013

The Continuous Risk Profile (CRP) has been well known to be the most accurate and efficient among existing network screening methods. However, the classical CRP uses safety performance functions (SPFs) which require a huge investment to construct a database system. This study aims to suggest a new CRP method using average crash frequencies of homogeneous groups, instead of SPFs, as rescaling factors. Hierarchical clustering analysis is performed to classify freeway segments into homogeneous groups based on the data of AADT and number of lanes. Using the data from I-880 in California, the proposed method is compared to other several network screening methods. The results show that the proposed method decrease false positive rates while it does not produce any false negatives. The method developed in this study can be easily applied to screen freeway networks without any additional complex database systems, and contribute to the improvement of freeway safety management systems.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.357-361
• /
• 1997

A Griemm type Glow Discharge cell is attached to a commercial quadrapole based ICP-MS and used for the analysis of surface analysis. By employing 2.0mm diameter, mode and proper experimental conditions, several layers of few ${\mu}m$ thickness are analysed within 30 minutes. Multi-layers of Cu-Ni, Fe-Ni are analyzed with the resolution of 10nm by GDMS. Proper experimental conditions make a flat bottom crater shape and good resolution for multi-layer depth profile study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.583-590
• /
• 2008

In construction work's design process, we must carry out a topographical survey for construction reserved land and to the basis of this, production of profile is indispensable factor for the purpose of every construction work such as road, rail way, canal and etc. From this research, the production of profile about construction reserved land, using topographical information of digital topographical map produced by NGIS project, construct precision 3D terrain model and from this, propose plans for utilizing by producing automatic profile. With the aim of this, extract every layers of main facilities and altitude from digital topographical map and while producing 3D terrain model by using this, we product automatic profile from precision 3D terrain model. And we was carried out to check whether the automatic produced profile's accuracy could be accepted at actual estimation by mutual analysis. It is considered that the result of the research could be suggested as a new techniques concept which can reduce the designing period and expenses and increase the efficiency of affair in the design process for the construction.

• Transactions of Materials Processing
• /
• v.28 no.4
• /
• pp.183-189
• /
• 2019

Cylindrical worm reducers are generally used in various fields and forms throughout the industry, and demand is increasing due to their role as an integral part of the industry. Market trends require high-load, high-precision components, and small-sized reducers with large loads. When using a cylindrical worm reducer, a reducer designed with a reduced center distance while maintaining the same output torque results in gear wear. To overcome this difficulty, an enveloping worm gear reducer is introduced and studied. In this paper, three types of end mill tools are used to evaluate the tooth profile accuracy for each tool shape during machining of the tooth profile for a non-developed surface worm thread. The effect of the endmill shape on the accuracy of the tooth profile was analyzed by performing 3D modeling of the surrounding worm tooth profile based on the Hindley method. In this study, we analyzed tooth profile accuracy, tooth surface roughness, and tooth surface machining time, etc. Through the study, efficient machining conditions for the enveloping worm gears and the influence of parameters on the process were presented.